Search results

The purpose of this paper was to find out the appropriate enzymatic hydrolysis conditions of alkali pretreated olive pomace (OP) which enable maximum yield of reducing sugar.

The commercial enzymatic preparation (Viscozyme^® L) was used for the hydrolysis of OP. The effects of pretreatment, time, temperature, pH, enzyme quantity and substrate loading on the hydrolysis yield were investigated.

This study showed that enzymatic hydrolysis of OP using Viscozyme^® L can be successfully performed at 50°C. Alkaline pretreatment step of OP prior the enzymatic hydrolysis was indispensable. The hydrolysis yield of alkaline pretreated OP was 2.6 times higher than the hydrolysis yield of untreated OP. Highest hydrolysis yield (33.5 ± 1.5 per cent) was achieved after 24 h using 1 per cent (w/v) OP load in the presence of 100 μl Viscozyme^® L at 50°C and pH 5.5 with mixing rate of 100 rpm (p = 0.05).

Reaction time, temperature, pH value and enzyme quantity were found to have a significant effect on enzymatic hydrolysis yield of alkali pretreated of OP. Although high-solid loadings of OP lowered the hydrolysis yield, it produced higher concentration of reducing sugars, which may render the OP conversion process more economically feasible.

The increasing accumulation of synthetic plastic waste in oceans and landfills, along with the depletion of non-renewable fossil-based resources, has sparked environmental concerns and prompted the search for environmentally friendly alternatives. Biodegradable plastics derived from lignocellulosic materials are emerging as substitutes for synthetic plastics, offering significant potential to reduce landfill stress and minimise environmental impacts. This study highlights a sustainable and cost-effective solution by utilising agricultural residues and invasive plant materials as carbon substrates for the production of biopolymers, particularly polyhydroxybutyrate (PHB), through microbiological processes. Locally sourced residual materials were preferred to reduce transportation costs and ensure accessibility. The selection of suitable residue streams was based on various criteria, including strength properties, cellulose content, low ash and lignin content, affordability, non-toxicity, biocompatibility, shelf-life, mechanical and physical properties, short maturation period, antibacterial properties and compatibility with global food security. Life cycle assessments confirm that PHB dramatically lowers CO₂ emissions compared to traditional plastics, while the growing use of lignocellulosic biomass in biopolymeric applications offers renewable and readily available resources. Governments worldwide are increasingly inclined to develop comprehensive bioeconomy policies and specialised bioplastics initiatives, driven by customer acceptability and the rising demand for environmentally friendly solutions. The implications of climate change, price volatility in fossil materials, and the imperative to reduce dependence on fossil resources further contribute to the desirability of biopolymers. The study involves fermentation, turbidity measurements, extraction and purification of PHB, and the manufacturing and testing of composite biopolymers using various physical, mechanical and chemical tests.

The purpose of this paper is to obtain high-solids-content and low-viscosity starch adhesive, and improve bonding strength of the pure starch adhesive.

Maize starch was treated by hydrochloric acid solution with different concentrations, and acid-thinned starch adhesive was prepared. Polyisocyanate as a crosslinking agent was added to improve water resistance of the pure starch adhesive.

The physical and chemical properties of the acid-thinned starch adhesive were characterised. Acid hydrolysis did not change structure of starch granules, but increased its crystallinity. After acid modification, starch granules became less smooth and some fragments appeared. Acid treatment had little influence on thermal stability of starch, when acid hydrolysis was not strong. High concentration of HCl solution led to starch granules being destroyed, resulting in decrease in bonding strength. The optimal HCl concentration was 0.5 mol/L. Polyisocyanate addition was beneficial to improve the bonding strength of the acid-thinned starch adhesive.

Acid hydrolysis changed the properties of the starch adhesive.

Acid hydrolysis decreased viscosity of the starch adhesive and improved its solids content, which had a positive effect on the application of the starch adhesive.

It was helpful to develop an environment-friendly, natural polymer-based wood adhesive.

The properties of acid-thinned starch and acid-thinned starch adhesive were studied.

This study aims to enhance the dyeability of polyester fabrics with turmeric natural dyes through plasma and alkaline treatments. The aim is to achieve better color strength in dyed samples without significant changes in their other properties. This is done while the weight loss is kept in a range with no considerable effect on those properties.

The surface of a poly(ethylene terephthalate) fabric was modified using oxygen plasma at a low temperature. The alkaline hydrolysis of that polyester fabric was also done through treating it with an aqueous sodium hydroxide (NaOH) solution. The untreated and treated polyester fabrics were studied for the changes of their physical characteristics such as weight loss, wetting behavior, strength loss, bending length, flexural rigidity and K/S and wash fastness. The samples were treated with plasma and sodium hydroxide and dyed with a turmeric natural dye.

In comparison to the untreated sample, the plasma-treated, alkaline-treated and plasma treatment followed by alkaline hydrolysis polyester experienced 9.3%, 68.6% and 102.3% increase in its color depth as it was dyed with a turmeric natural dye, respectively. The plasma treatment was followed by alkaline hydrolysis. The improvement in the color depth could be attributed to the surface modification.

In this paper, investigations were conducted of the separate effects of plasma treatment and alkaline hydrolysis as well as their synergistic effect on the dyeing of the polyester fabric with a natural dye obtained from turmeric.

This paper aims to study the effect of hydrolysis route of hydroxypropyl cellulose (HPC) on its esterification performance as liquid crystal material. The assessment was carried out from the data of spectra (Fourier-transform infrared analysis [FTIR] and 1H-nuclear magnetic resonance [1H-NMR]), thermal stability as well as optical properties via forming ordered mesophases at lower concentration than HPC.

The HPC was hydrolyzed by hydrochloric acid-methanol at times 9 and 18 h, and the products were esterified by decanoyl chloride. The products of hydrolysis and the esterification were characterized by FTIR, NMR, nonisothermal analysis, thermo-gravimetric analysis (TGA) and polarizing microscope to evaluate the role of degree of substitution of HPC as a result of hydrolysis, on esterification degree, thermal stability and thermal and liquid crystal behavior of the final esterified HPC.

The pretreatment by acid hydrolysis of HPC was successful for synthesizing novel cholesteric hydroxypropyl cellulose ester. The data of FTIR and TGA thermal analysis proved that hydrolysis and esterification of HPC with the decanoyl chain significantly enhanced crystallinity of this cellulose derivative from 0.57 to (1.7–1.9). Moreover, they provided products with superior thermal stability than pure HPC, as noticed from increasing the activation energy of degradation (E_a) from 514.3 to 806.2 kJ/mol. The NMR measurement proved that hydrolysis of HPC for 9 and 18 h decreased the degree of substitution from 3 to 2.1 and 1.3, respectively. Moreover, the esterified HPC showed a promising birefringence texture (chiral nematic) besides decreasing the critical concentration from 30% for HPC to 10% for the esterified unhydrolyzed HPC, while superior decreasing to 1–5% was observed for the esterified hydrolyzed HPC.

There are two stages for preparation of decanoyl ester hydroxypropyl cellulose. At the first stage, HPC was treated by hydrochloric acid-methanol in ratio 1:10 at times 9 and18 h. At the second stage, HPC and hydrolyzed HPC were refluxed with decanoyl chloride (1:6) in presence of nitrogen atmosphere. The final product was precipitated by distilled water.

There are two stages for preparation of decanoyl ester hydroxypropyl cellulose. At the first stage, HPC was treated by hydrochloric acid-methanol in ratio 1:10 at times 9 and18 h. At the second stage, HPC and hydrolyzed HPC were refluxed with decanoyl chloride (1:6) in presence of nitrogen atmosphere. The final product was precipitated by distilled water.

The novelty of this work was focused on enhancing the crystallinity, thermal stability and liquid crystal behavior of esterified HPC, via decreasing the degree of substitution and consequently the type of OH group subjected to esterification. The decanoyl ester formation from the hydrolyzed hydroxypropyl cellulose is able to form ordered mesophases at even low concentration (promising birefringence texture at concentrations 1–5%). It is worthy to notice that the investigated route is able to omit the role of graphene oxide in promoting the liquid crystal behavior of HPC, as it hasn't any effect on critical concentration. This work will promote the use of HPC in technological applications, e.g. high modulus fibers and electronic devices.

The purpose is to focus on improving the water or metal ion uptake of modified cellulose.

Grafting copolymerisation of hydrophilic monomers such as acrylamide or hydrophobic monomers as acrylonitrile onto cotton linters was performed.

The grafting process has two advantages. The first is to replace the hydroxyl group of C₆ of the glucose units in the substrate by carboxyl group that attract the metal ions from the solution. The second is to decrease the number of the hydroxyl groups in the cotton linters so that the hydrogen bonding between the cotton linters strands decreases and so the crystallinity index of substrate decreases by introduction of this hydrophilic group so it becomes more chemically active.

Partial substitution of hydroxyl groups of cellulose by more hydrophilic ones via grafting reaction followed by alkaline hydrolysis was performed. The effects of different conditions such as temperature, time, initiator concentration, monomer concentration and kind of substrate were studied. The polymerisation per cent, grafting per cent, the grafting efficiency and the nitrogen per cent of the grafted samples were determined. The molecular structures of cotton linters, grafted cotton linters with acrylamide and its hydrolysis product were studied using infrared spectroscopy, which indicates the fixation of the monomers on the cotton linters. Sodium binding capacity and the metal ion uptake of some metal ions by the product were determined.

The water or metal ion uptake of the modified cellulose was improved.

The aim of this study is to find out the appropriate fermentation conditions of Jerusalem artichoke powder (JAP) based media to obtain light beverage containing inulin.

JAP water suspension or filtrate were used for preparation of growth media with or without enzymatic hydrolysis of inulin for fermentation by Zymomonas mobilis 113 “S” or Saccharomyces cerevisiae.

If enzymatic hydrolysis of inulin was not used significantly higher amount of inulin (7.42 per cent) was unconverted by Z. mobilis than by S. cerevisiae (2.22 per cent) while the ethanol concentration was much higher (2.86 per cent) after S. cerevisiae fermentation than after Z. mobilis fermentation (1.21 per cent). Considerably more ethanol was produced by Z. mobilis during co‐fermentation with Fructozyme L of JAP suspension filtrate (5.98 per cent) and suspension (4.96 per cent). Analyses of volatile components of fermentation broths showed that for production of inulin containing light beverages the best was Z. mobilis fermentation of JAP water suspension or filtrate without enzymatic treatment. FT–IR spectroscopy can be used as a quick semi‐quantitative method for evaluation of inulin content.

JAP – containing not only inulin but all tuber ingredients, was used as a media for ethanol fermentations by Z. mobilis 113 “S” or S. cerevisiae with or without hydrolysis of inulin. It was shown that Z. mobilis fermentation broths containing 7.42 per cent of inulin can be used as beverage with prebiotic‐dietary fibre benefits. The taste of this product can be regulated by appropriate fermentation conditions and the concentration of fructose and ethanol.

–Prosopis juliflora is a raw material for long-term sustainable production of bioethanol. The purpose of this paper is to identify the best combination of pre-treatment strategy implemented on the lignocellulosic biomass Prosopis juliflora for bioethanol production.

Pre-treatment of lignocellulosic material was carried out using acid, alkali and sonication in order to characterize the biomass for bioethanol production. Prosopis juliflora stem was subjected to steam at reduce temperature (121°C) for one hour residence time initially. Further acid and alkali treatment was carried out individually followed by combinations of acid and sonication, alkali and sonication. Sodium hydroxide, potassium hydroxide, hydrochloric acid, sulphuric acid and nitric acid were used with 3 per cent (w/v) and 3 per cent (v/v) concentration under temperature range of 60-90°C for 60 min incubation time. Sonication under 60°C for 5 min and 40 KHz frequency was carried out. Pre-treated sample were further characterised using field emission scanning electron microscope and Fourier transform infrared spectroscopy to understand the changes in surface morphology and functional characteristics.

In sono assisted acid treatment-based method, nitric acid yields better cellulose content at 70°C and removes lignin that even at increased temperatures no burning was observed.

The paper adds to the scarce research available on the combination of auto hydrolysis coupled with sono assisted acid/alkali hydrolysis which is yet to be practiced.

The paper aims to analyse the effect of acid hydrolysis on the chemical composition and the biological activities of Rubia tinctorum collected from the south of Tunisia. It proposes to clarify the relationship between alizarin content and the antioxidant and antimicrobial activities of Rubia extract.

The paper opted for analytical tools (HPLC) and the in-vitro study of biological activities, namely, the antioxidant activity which is evaluated using the radical scavenging assay (ABTS) and ferric reducing power assay (FRAP); the antimicrobial activity is tested using the wells agar diffusion method.

The paper provides information about the positive effect of acid hydrolysis, namely, the enhancement of alizarin content in the extract which has increased its antioxidant and antimicrobial activities.

This paper fulfils an identified need to study the relationship between the chemical composition, biological activities and colour enhancement.

This study aims to evaluate the effect of heating and pepsin hydrolysis on the allergenicity of purified cow’s milk ß-lactoglobulin using individual sera from Moroccan population.

A cross-sectional study was carried out in Hospitals of Fez-Meknes region, to evaluate specific IgE to raw cow milk, as well as to heated and pepsin-hydrolyzed β-lactoglobulin.

Results showed that 6.6 per cent of studied patients presented high values of serial IgE. The effect of treatments on the allergenicity of ß-lactoglobulin showed that heating at 90°C and pepsin hydrolysis, for 1 h each, showed an important decrease in the recognition of human IgE with a maximum of reduction of 81 and 91 per cent, respectively.

This reduction of immunoreactivity of human IgE to treated ß-lactoglobulin suggested that this Moroccan population recognized mostly conformational epitopes.