Search results

The presence of heavy metals in milk causes many acute and chronic physiological dysfunctions in human organs. The present study aims to investigate the heavy metals in cow's and buffalo's milk of two major cities, Karachi and Gujranwala, Pakistan to estimate metal intake by humans from this source.

In total, 48 milk samples from 2 cities were drawn from animals' udder to avoid contamination. Each sample was digested with nitric acid at 105 ^oC (degree Celsius) on a pre-heated electric hot plate to investigate the metals by atomic absorption spectroscopy (flame type). Air-acetylene technique analyzed chromium, cadmium and lead, and the hydride method analyzed arsenic in the milk samples.

The results revealed the highest mean lead concentration (19.65 ± 43.86 ppb) in the milk samples, followed by chromium (2.10 ± 2.33 ppb) and arsenic (0.48 ± 0.73 ppb). Cadmium was not detected in any sample, assuming cadmium's occurrence was below the detection level. The concentrations of all the metals in the samples of the two cities do not differ statistically. Lead concentrations in the buffalo's milk were higher than in cow's milk (p < 0.05). However, the concentrations of arsenic and chromium between buffalo's and cow's milk do not differ statistically. The present study reveals a lower level of metals in the milk than those conducted elsewhere. The mean concentrations of all the metals met the World Health Organization's (WHO) safety guidelines (1993).

Although cadmium causes toxicity in the human body, cadmium could not be measured because cadmium's concentration was below the detection level, which is 1 ppb.

This study will help reduce the toxic metals in our environment, and the sources of heavy metals, particularly from the industrial sector could be identified. The feed and water consumed by the milking animals could be carefully used for feeding them.

This study will help reduce the diseases and malfunction of human organs and organ systems since these heavy metals cause toxicity and carcinogenicity in humans. Arsenic and chromium cause cancer while lead causes encephalopathy (a brain disease).

The study reports heavy metal concentrations in the two attributes of four independent variables of raw milk samples that were scarcely reported from Pakistan.

The present study focused on examining the effect of treated wastewater (TWW) on soil chemical properties. Also, efforts were made to compare the soil chemical properties under TWW irrigation with that under groundwater (GW).

During the years 2021 and 2022, surface and subsurface soil samples were randomly collected in triplicate by using an auger fortnightly at two depths (20 and 40 cm) from the selected spot areas to represent the different types of irrigation water sources: TWW and GW. Samples of the GW and the TWW were collected for analysis.

This study examines the impact of TWW on soil characteristics and the surrounding environment. TWW use enhances soil organic matter, nutrient availability and salt redistribution, while reducing calcium carbonate accumulation in the topsoil. However, it negatively affects soil pH, electrical conductivity and sodium adsorption ratio, although remaining within acceptable limits. Generally, irrigating with TWW improves most soil chemical properties compared to GW.

In general, almost all of the soil’s chemical properties were improved by irrigating with TWW rather than GW. Following that, wastewater is used to irrigate the soil. Additionally, the application of gypsum to control the K/Na and Ca/Na ratios should be considered under long-term TWW and GW usage in this study area in order to control the salt accumulation as well as prevent soil conversion to saline-sodic soil in the future. However, more research is needed to thoroughly investigate the long-term effects of using TWW on soil properties as well as heavy metal accumulation in soil.

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The purpose of this article is to provide information about interactions between pink-pigmented facultative methylotroph (PPFM) organisms and plants, their molecular mechanisms of methylotrophic metabolism, application of PPFMs in agriculture, biotechnology and bioremediation and also to explore lacuna in PPFMs research and direction for future research.

Research findings on PPFM organisms as potent plant growth promoting organisms are discussed in the light of reports published by various workers. Unexplored field of PPFM research are detected and their application as a new group of biofertilizer that also help host plants to overcome draught stress in poorly irrigated crop field is suggested.

PPFMs are used as plant growth promoters for improved crop yield, seed germination capacity, resistance against pathogens and tolerance against drought stress. Anti-oxidant and UV resistant properties of PPFM pigments protect the host plants from strong sunshine. PPFMs have excellent draught ameliorating capacity.

To meet the ever increasing world population, more and more barren, less irrigated land has to be utilized for agriculture and horticulture purpose and use of PPFM group of organisms due to their draught ameliorating properties in addition to their plant growth promoting characters will be extremely useful. PPFMs are also promising candidates for the production of various industrially and medicinally important enzymes and other value-added products. Wider application of this ecofriendly group of bacteria will reduce crop production cost thus improving economy of the farmers and will be a greener alternative of hazardous chemical fertilizers and fungicides.

Graphicalabstract:

A direct correlation exists between waste disposal, disease spread and public health. This article systematically reviewed healthcare waste and its implication for public health. This review identified and described the associations and impact of waste disposal on public health.

This paper systematically reviewed the literature on waste disposal and its implications for public health by searching Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA), PubMed, Web of Science, Scopus and ScienceDirect databases. Of a total of 1,583 studies, 59 articles were selected and reviewed.

The review revealed the spread of infectious diseases and environmental degradation as the most typical implications of improper waste disposal to public health. The impact of waste includes infectious diseases such as cholera, Hepatitis B, respiratory problems, food and metal poisoning, skin infections, and bacteremia, and environmental degradation such as land, water, and air pollution, flooding, drainage obstruction, climate change, and harm to marine and wildlife.

Infectious diseases such as cholera, hepatitis B, respiratory problems, food and metal poisoning, skin infections, bacteremia and environmental degradation such as land, water, and air pollution, flooding, drainage obstruction, climate change, and harm to marine and wildlife are some of the public impacts of improper waste disposal.

Healthcare industry waste is a significant waste that can harm the environment and public health if not properly collected, stored, treated, managed and disposed of. There is a need for knowledge and skills applicable to proper healthcare waste disposal and management. Policies must be developed to implement appropriate waste management to prevent public health threats.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

The purpose of this study is to investigate the gendered ideas and ideals attached to an imagined ideal Entrepreneur in a post-industrial rural community in Sweden. While research has not yet clearly explained how the ideal entrepreneur is constructed, the result, i.e. the gendered representations of entrepreneurs, is well-researched. Previous results indicate a prevalent portrayal of entrepreneurship as a predominantly masculine construct characterised by qualities such as self-made success, confidence and assertiveness.

Ethnographic fieldwork was conducted in a community that is attempting to re-brand itself through garden tourism. Through inductive reasoning, this study analyses the gendered ideas and ideals regarding the community’s imagined ideal Entrepreneur who is to help the community solve its problems.

This study finds that the community forges the Entrepreneur into an imagined masculine ideal as holy, a saviour and a god and is replacing its historical masculine ironmaster with a masculine Entrepreneur. This study develops forging as a metaphor for the construction of the masculine ideal Entrepreneur, giving the community, rather than the entrepreneur himself, a voice as constructors. From social constructionism, this study emphasises how gendered ideas and ideals are shaped not only by the individual realities but more so in the reciprocal process by the realities of others.

The metaphor of forging adds an innovative theoretical dimension to the feminist constructionist approach and suggests focusing on how the “maleness” of entrepreneurship is produced and reproduced in the local. Previously, light has been shed on how male entrepreneurs perform their identities collectively; the focus of this study is on the social construction of this envisioned Entrepreneur within a rural community. The development of forging thus contributes as a way of analysing entrepreneurship in place. The choice of an ethnographic study allowed the authors to be a part of the real-life world of community members, providing rich data to explore entrepreneurship and gender.

This study aims to assess the effect of water variation on bioethanol production from cassava peels (CP) using Saccharomyces cerevisiae yeast as the ethanologenic agent.

The milled CP was divided into three treatment groups in a small-scale flask experiment where each 20 g CP was subjected to two-stage hydrolysis. Different amount of water was added to the fermentation process of CP. The fermented samples were collected every 24 h for various analyses.

The results of the fermentation revealed that the highest ethanol productivity and fermentation efficiency was obtained at 17.38 ± 0.30% and 0.139 ± 0.003 gL⁻¹ h⁻¹. The study affirmed that ethanol production was increased for the addition of water up to 35% for the CP hydrolysate process.

The finding of this study demonstrates that S. cerevisiae is the key player in industrial ethanol production among a variety of yeasts that produce ethanol through sugar fermentation. In order to design truly sustainable processes, it should be expanded to include a thorough analysis and the gradual scaling-up of this process to an industrial level.

This paper is an original research work dealing with bioethanol production from CP using S. cerevisiae microbe.

1. Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

2. Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

3. Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

4. Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Hydrolysis of cassava peels using 13.1 M H₂SO₄ at 100 ^oC for 110 min gave high Glucose productivity

Highest ethanol production was obtained at 72 h of fermentation using Saccharomyces cerevisiae

Optimal bioethanol concentration and yield were obtained at a hydration level of 35% agitation

Highest ethanol productivity and fermentation efficiency were 17.3%, 0.139 g.L⁻¹.h⁻¹

Petroleum hydrocarbons are naturally occurring flammable fossil fuels used as conventional energy sources. It has carcinogenic, mutagenic properties and is considered a hazardous pollutant. Soil contaminated with petroleum hydrocarbons adversely affects the properties of soil. This paper aim to remove pollutants from the environment is an urgent need of the hour to maintain the proper functioning of soil ecosystems.

The ability of micro-organisms to degrade petroleum hydrocarbons makes it possible to use these microorganisms to clean the environment from petroleum pollution. For preparing this review, research papers and review articles related to petroleum hydrocarbons degradation by micro-organisms were collected from journals and various search engines.

Various physical and chemical methods are used for remediation of petroleum hydrocarbons contaminants. However, these methods have several disadvantages. This paper will discuss a novel understanding of petroleum hydrocarbons degradation and how micro-organisms help in petroleum-contaminated soil restoration. Bioremediation is recognized as the most environment-friendly technique for remediation. The research studies demonstrated that bacterial consortium have high biodegradation rate of petroleum hydrocarbons ranging from 83% to 89%.

Proper management of petroleum hydrocarbons pollutants from the environment is necessary because of their toxicity effects on human and environmental health.

This paper discussed novel mechanisms adopted by bacteria for biodegradation of petroleum hydrocarbons, aerobic and anaerobic biodegradation pathways, genes and enzymes involved in petroleum hydrocarbons biodegradation.