Search results

This study aims to offer a hybrid stand-alone system for electric vehicle (EV) charging stations (CS), an emerging power scheme due to the availability of renewable and environment-friendly energy sources. This paper presents the analysis of a photovoltaic (PV) with an adaptive neuro-fuzzy inference system (ANFIS) algorithm, solid oxide fuel cell (SOFC) and a battery storage scheme incorporated for EV CS in a stand-alone mode. In previous studies, either the hydrogen fuel of SOFC or the irradiance is controlled using artificial neural network. These parameters are not controlled simultaneously using an ANFIS-based approach. The ANFIS-based stand-alone hybrid system controlling both the fuel flow of SOFC and the irradiance of PV is discussed in this paper.

The ANFIS algorithm provides an efficient estimation of maximum power (MP) to the nonlinear voltage–current characteristics of a PV, integrated with a direct current–direct current (DC–DC) converter to boost output voltage up to 400 V. The issue of fuel starvation in SOFC due to load transients is also mitigated using an ANFIS-based fuel flow regulator, which robustly provides fuel, i.e. hydrogen per necessity. Furthermore, to ensure uninterrupted power to the CS, PV is integrated with a SOFC array, and a battery storage bank is used as a backup in the current scenario. A power management system efficiently shares power among the aforesaid sources.

A comprehensive simulation test bed for a stand-alone power system (PV cells and SOFC) is developed in MATLAB/Simulink. The adaptability and robustness of the proposed control paradigm are investigated through simulation results in a stand-alone hybrid power system test bed.

The simulation results confirm the effectiveness of the ANFIS algorithm in a stand-alone hybrid power system scheme.

The purpose of this paper is to investigate the performance of Passive Direct Methanol Fuel Cell (PDMFC) experimentally using various Membrane Electrode Assembly (MEA) shapes such as square, rectangle, rhombus, and circle with equal areas and equal perimeters. The variation in MEA shape/size is achieved by altering gasket openings in the dynamic regions.

In the equal areas of MEA shapes, gasket opening areas of 1963.5 (+/−0.2) mm2 are used. Whereas in the equal perimeters of shapes, gasket opening perimeters of 157.1 (+/−0.2) mm are used. In this experimentation, Nickel-201 current collectors with 45.3% of circular openings are used on both the anode and cathode sides. The experiment is carried out at a 5 molar methanol concentration to find out the highest power density of the cell.

In the equal areas, among the shapes that are chosen for investigation, the square shape opening consisting of a perimeter of 177.2 mm has developed a maximum power density of 6.344 mWcm⁻² and a maximum current density of 65.2 mAcm⁻². Similarly, in equal perimeters, the rhombus shape opening with an area of 1400 mm2 has developed a maximum power density of 7.714 mWcm⁻² and a maximum current density of 85.3 mAcm⁻².

The novelty of this research work is instead of fabricating various shapes and sizes of highly expensive MEAs, the desired shapes and sizes of the MEA are achieved by altering gasket openings over dynamic regions to find out the highest power density of the cell.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

Traditional level inverter technology has drawbacks in the aspect of Total harmonic distortion (THD) and switching losses for higher frequencies. Due to these drawbacks, two-level inverters have become unprofitable for high-power applications. Multilevel inverters (MLIs) are used to enhance the output waveform characteristics (i.e. low THD) and to offer various inverter topologies and switching methods.

MLIs are upgraded versions of two-level inverters that offer more output levels in current and voltage waveforms while lowering the dv/dt and di/dt ratios. This paper aims to review and compare the different topologies of MLI used in high-power applications. Single and multisource MLI's working principal and switching states for each topology are demonstrated and compared. A Simulink model system integrated using detailed circuit simulations in developed in MATLAB®–Simulink program. In this system, a constant voltage source connected to MLI to feed asynchronous motor with squirrel cage rotor type is used to demonstrate the efficacy of the MLI under different varying speed and torque conditions.

MLI has presented better control and good range of system parameters than two-level inverter. It is suggested that the MLIs like cascade-five-level and NPC-five-level have shown low current harmonics of around 0.43% and 1.87%, respectively, compared to two-level inverter showing 5.82%.

This study is the first of its kind comparing the different topologies of single and multisource MLIs. This study suggests that the MLIs are more suitable for high-power applications.

The purpose of this paper is to consider the ethical and environmental implications of allowing space resource extraction to disrupt existing fuel economies, including how companies can be held accountable for ensuring the responsible use of their space assets. It will also briefly consider how such assets should be taxed, and the cost/benefit analyses required to justify the considerable expense of supporting this emerging space industry.

This paper adopts theoretical bioethics methodologies to explore issues of normative ethics and the formulation of moral rules to govern individual, collective and institutional behaviour. Specifically, it considers social justice and social contract theory, consequentialist and deontological accounts of ethical evaluation. It also draws on sociological and organisational literature to discuss Dowling and Pfeffer’s (1975) and Suchman’s (1995) theories of pragmatic, cognitive and moral legitimacy as they may be applied to off-world mining regulations and the handling of space assets.

The findings of this conceptual paper indicate there is both a growing appetite for tighter resource extraction regulations to address climate change and wealth concentration globally, and an opportunity to establish and legitimise new ethical norms for commercial activity in space that can avoid some of the challenges currently facing fossil fuel divestment movements on Earth.

By adopting methodologies from theoretical bioethics, sociology and business studies, including applying a legitimacy lens to the issue of off-world mining, this paper synthesises existing knowledges from these fields and brings them to the new context of the future space resource economy.

This paper aims to assess the impact of electrifying the environmental control system (ECS) and ice protection system (IPS), the primary pneumatic system consumers in a conventional commercial transport aircraft, on aircraft weight, range, and fuel consumption.

The case study was carried out on Airbus A321-200 aircraft. Design, modelling and analysis processes were carried out on Pacelab SysArc software. Conventional and electrical ECS and IPS architectures were modelled and analysed considering different temperature profiles.

The simulation results have shown that the aircraft model with ±270 VDC ECS and IPS architecture is lighter, has a more extended range and has less relative fuel consumption. In addition, the simulation results showed that the maximum range and relative fuel economy of all three aircraft models increased slightly as the temperature increased.

Considering the findings in this paper, it is seen that the electrification of the conventional pneumatic system in aircraft has positive contributions in terms of weight, power consumption and fuel consumption.

The positive contributions in terms of weight, power consumption and fuel consumption in aircraft will be direct environmental and economic contributions.

Apart from the conventional ECS and IPS of the aircraft, two electrical architectures, 230 VAC and ±270 VDC, were modelled and analysed. To see the effects of the three models created in different temperature profiles, analyses were done for cold day, ISA standard day and hot day temperature profiles.

This paper aims to investigate the effect of partially blocking the cathode channel with the stair arrangement of obstacles on the performance of a proton exchange membrane fuel cell.

A numerical study is conducted by developing a three-dimensional computational fluid dynamics model.

As the angle of the stair arrangement increases, the performance of the fuel cell is reduced and the pressure drop is decreased. The use of four stair obstacles with an angle of 0.17° leads to higher power density and a lower pressure drop compared to the case with three rectangular obstacles of the same size and maximum height. The use of four stair obstacles with an angle of 0.34° results in higher power density and lower pressure drop compared to the case with two rectangular obstacles of the same size and maximum height.

Using the stair arrangement of obstacles as an innovation of the present work, in addition to improving the fuel cell’s performance, creates a lower pressure drop than the simple arrangement of obstacles.

Inland shipping has been extensively recognised as a sustainable, efficient and good alternative to rail and road modes of transportation. In recent years, various authorities and academic researchers have advocated shifting from road to other sustainable modes like inland waterway transport (IWT) or rail transport. Academic work on modernisation and technological innovations to enhance the effectiveness and efficiency of waterborne transportation is becoming apparent as a growing body of literature caused by the need to achieve a sustainable transport system. Thus, it became apparent to explore the research trends on IWT.

A systematic and structured literature review study was employed in this paper to identify the challenges and concepts in modernising inland waterways for freight transportation. The review analysed 94 articles published in 54 journals from six well-known databases between 2010 and 2022.

The key findings of this review are that despite various challenges confronting the sector, there have been successful cases of technological advancement in the industry. The main interest among scholars is improving technical and economic performance, digitalisation, and safety and environmental issues. The review revealed that most of the literature is fragmented despite growing interest from practitioners and academic scholars. Academic research to address the strategic objectives, including strengthening competitiveness (shipbuilding, hydrodynamics, incorporating artificial intelligence into the decision-making process, adopting blockchain technology to ensure transparency and security in the transactions, new technologies for fleets adaptation to climate change, more effective handling, maintenance and rehabilitation technologies), matching growth and changing trade patterns (intermodal solutions and new logistics approaches) are major causes of concerns.

By employing the approach of reviewing previously available literature on IWT review papers, this review complements the existing body of literature in the field of IWT by providing in a single paper a consolidation of recent state-of-the-art research on technological developments and challenges for inland waterways freight transport in the intermodal supply chain that can act as a single resource to keep researchers up to date with the most recent advancements in research in the domain of inland waterway freight transport. Additionally, this review identified gaps in the literature that may inspire new research themes in the field of IWT.

The European Union's Emissions Trading System (EU ETS), which is already one of the EU's most impactful instruments for reducing greenhouse gases (GHGs), will soon include the maritime transport industry. Although ports are this industry's most environmental-friendly component, there are still some barriers to including ports in the system. Therefore, the purpose of the study is to identify these barriers and to reveal the barriers' interrelationships.

The study was conducted by identifying barriers from a literature review before analyzing the barriers with the Fuzzy DEMATEL method. Finally, based on the Complex Adaptive System Approach, various solutions are proposed to overcome these barriers.

The identified barriers were grouped into cause-and-effect groups. Two barriers, namely long payback period and high investment costs, were evaluated as triggers of the model while the others were more sensitive to the model.

This study only includes the perceptions of green certificated ports in Türkiye. The results revealed an expectation that elimination of financial concerns will alleviate other barriers to including ports in the system. The study's findings can guide port managers on the integration of the managers' processes into the system.

This study provides novel findings regarding the relationships between barriers hindering ports from involvement in the EU ETS.

This article aims to optimise energy use and consumption by integrating Lean Six Sigma methodology with the ISO 50001 energy management system standard in an Irish dairy plant operation.

This work utilised Lean Six Sigma methodology to identify methods to measure and optimise energy consumption. The authors use a single descriptive case study in an Irish dairy as the methodology to explain how DMAIC was applied to reduce energy consumption.

The replacement of heavy oil with liquid natural gas in combination with the new design of steam boilers led to a CO₂ footprint reduction of almost 50%.

A further longitudinal study would be useful to measure and monitor the energy management system progress and carry out more case studies on LSS integration with energy management systems across the dairy industry.

The novelty of this study is the application of LSS in the dairy sector as an enabler of a greater energy-efficient facility, as well as the testing of the DMAIC approach to meet a key objective for ISO 50001 accreditation.