Search results

The purpose of this study is to develop a cylindrical capacitive sensor that has the advantages of high resolution, small size and designability and can be easily installed on lubricant pipeline to monitor lubricant oil debris.

A theoretical model of the cylindrical capacitive sensor is presented to analyze several parameters’ effectiveness on the performance of sensor. Numerical simulations are then conducted to determine the optimal parameters for preliminary experiments. Experiments are finally carried out to demonstrate the detectability of developed capacitive sensors.

It is clear from experimental results that the developed capacitive sensor can monitor the debris in lubricant oil well, and the capacitance values increase almost linearly when the number and size of debris increase.

There is lot of further work to do to apply the presented method into the application. Especially, it is necessary to consider several factors’ influence on monitoring results. These factors include the flow rate of the lubricant oil, the temperature, the debris distribution and the vibration. Moreover, future work should consider the influence of the oil degradation to the capacitance change and other contaminations (e.g. water and dust).

This work conducts a feasibility study on application of capacitive sensing principle for detecting debris in aero engine lubricant oil.

The novelty of the presented capacitance sensor can be summarized into two aspects. One is that the sensor structure is simple and characterized by two coaxial cylinders as electrodes, while conventional capacitive sensors are composed of two parallel plates as electrodes. The other is that sensing mechanism and physical model of the presented sensor is verified and validated by the simulation and experiment.

Crystallization is the process widely used for components separation and solids purification. The systems for crystallization process evaluation applied so far, involve numerous non-invasive tomographic measurement techniques which suffers from some reported problems. The purpose of this paper is to show the abilities of three-dimensional Electrical Capacitance Tomography (3D ECT) in the context of non-invasive and non-intrusive visualization of crystallization processes. Multiple aspects and problems of ECT imaging, as well as the computer model design to work with the high relative permittivity liquids, have been pointed out.

To design the most efficient (from a mechanical and electrical point of view) 3D ECT sensor structure, the high-precise impedance meter was applied. The three types of sensor were designed, built, and tested. To meet the new concept requirements, the dedicated ECT device has been constructed.

It has been shown that the ECT technique can be applied to the diagnosis of crystallization. The crystals distribution can be identified using this technique. The achieved measurement resolution allows detecting the localization of crystals. The usage of stabilized electrodes improves the sensitivity of the sensor and provides the images better suitable for further analysis.

The dedicated 3D ECT sensor construction has been proposed to increase its sensitivity in the border area, where the crystals grow. Regarding this feature, some new algorithms for the potential field distribution and the sensitivity matrix calculation have been developed. The adaptation of the iterative 3D image reconstruction process has also been described.

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.

Although the industrial application of drones is increasing quickly, there is a scarcity of applications in manufacturing. The purpose of this paper is to explore current and potential applications of drones in manufacturing, examine the opportunities and challenges involved and propose a research agenda.

The paper reports the result of an extensive qualitative investigation into an emerging phenomenon. The authors build on the literature on advanced manufacturing technologies. Data collected through in-depth interviews with 66 drone experts from 56 drone vendors and related services are analyzed using an inductive research design.

Drones represent a promising AMT that is expected to be used in several applications in manufacturing in the next few years. This paper proposes a typology of drone applications in manufacturing, explains opportunities and challenges involved and develops a research agenda. The typology categorizes four types of applications based on the drones’ capabilities to “see,” “sense,” “move” and “transform.”

The proposed research agenda offers a guide for future research on drones in manufacturing. There are many research opportunities in the domains of industrial engineering, technology development and behavioral operations.

Guidance on current and promising potentials of drones in manufacturing is provided to practitioners. Particularly interesting applications are those that help manufacturers “see” and “sense” data in their factories. Applications that “move” or “transform” objects are scarcer, and they make sense only in special cases in very large manufacturing facilities.

The application of drones in manufacturing is in its infancy, but is foreseen to grow rapidly over the next decade. This paper presents the first academically rigorous analysis of potential applications of drones in manufacturing. An original and theory-informed typology for drone applications is a timely contribution to the nascent literature. The research agenda presented assists the establishment of a new stream of literature on drones in manufacturing.

Despite the contributions of both the oil and gas and construction industries to the gross domestic product (GDP) of the country, both industries are still marred by incessant accidents. Therefore, the aim of this study is to compare the health and safety practises of the construction and oil and gas industries in Nigeria in order to suggest the best approach to health and safety practices.

A survey questionnaire was developed and administered to professionals working in the construction and oil and gas industries. Data were analysed using the relative importance index (RII). An independent sample t-test was also conducted to determine whether there was a significant difference in the construction and oil and gas industries.

The study revealed that the rate at which health and safety are practised in the oil and gas industry is comparatively high compared to how they are practised in the construction industry. Proper site layout and planning, provision of a safe working environment, proper health and safety risk assessment were more predominantly practised in the oil and gas industry, while proper site layout and planning, disallowing unauthorised entry into site and the provision of a safe working environment were predominantly practised in the construction industry.

This study is the first to compare the health and safety practises of the construction and oil and gas industries in Nigeria. This study was significant because it would provide insight into construction and oil and gas managers, as well as other decision-makers in both industries, on how to improve health and safety practices.

This paper is supposed to provide a critical review of current research progress on thermal management in grinding of superalloys, and future directions and challenges. By understanding the current progress and identifying the developing directions, thermal management can be achieved in the grinding of superalloys to significantly improve the grinding quality and efficiency.

The relevant literature is collected from Web of Science, Scopus, CNKI, Google scholar, etc. A total of 185 literature is analyzed, and the findings in the literature are systematically summarized. In this case, the current development and future trends of thermal management in grinding of superalloys can be concluded.

The recent developments in grinding superalloys, demands, challenges and solutions are analyzed. The theoretical basis of thermal management in grinding, the grinding heat partition analysis, is also summarized. The novel methods and technologies for thermal management are developed and reviewed, i.e. new grinding technologies and parameter optimization, super abrasive grinding wheel technologies, improved lubrication, highly efficient coolant delivery and enhanced heat transfer by passive thermal devices. Finally, the future trends and challenges are identified.

Superalloys have excellent physical and mechanical properties, e.g. high thermal stability, and good high-temperature strength. The superalloys have been broadly applied in the aerospace, energy and automobile industries. Grinding is one of the most important precision machining technologies for superalloy parts. Owing to the mechanical and physical properties of superalloys, during grinding processes, forces are large and a massive heat is generated. Consequently, the improvement of grinding quality and efficiency is limited. It is important to conduct thermal management in the grinding of superalloys to decrease grinding forces and heat generation. The grinding heat is also dissipated in time by enhanced heat transfer methods. Therefore, it is necessary and valuable to holistically review the current situation of thermal management in grinding of superalloys and also provide the development trends and challenges.

Alzheimer’s disease (AD), the most common cause of dementia, is a neurodegenerative disorder caused by the aggregation of amyloid-beta (Aβ) at outside of neuron cells and also due to tau aggregation inside the cell. Corosolic acid is aimed to be selected as a main active constituent of Lagerstroemia speciosa for the study.

In the present study, molecular docking of corosolic acid and tau protein was examined using PyRx-v.0.8 software. Absorption, Distribution, Metabolism, Excretion, and Toxicity (ADMET) properties were described and a molecular dynamics study of the bound complex was performed using Desmond.

The docking score and interactions suggested that the corosolic acid (CID:6918774) could bind to tau protein to prevent the fibrillar network, to prevent AD. During simulation corosolic acid-bound protein root mean square deviation (RMSD) values showed more stability when compared to the Apo form of protein. Molecular dynamics study of tau protein and corosolic acid complex gave the insights to develop a drug-like candidate against AD.

The use of corosolic acid of Lagerstroemia speciosa to prevent AD is supported by preliminary analysis on a computational basis. This compound should explore in terms of experimental strategies for the further drug development process. However, in vitro and in vivo evaluation studies are required to suggest the use of corosolic acid against AD.

This paper aims to present a requirements analysis for the processing of water-based electrode dispersions in inkjet printing.

A detailed examination of the components and the associated properties of the electrode dispersions has been carried out. The requirements of the printing process and the resulting performance characteristics of the electrode dispersions were analyzed in a top–down approach. The product and process side were compared, and the target specifications of the dispersion components were derived.

Target ranges have been identified for the main component properties, balancing the partly conflicting goals between the product and the process requirements.

The findings are expected to assist with the formulation of electrode dispersions as printing inks.

Little knowledge is available regarding the particular requirements arising from the systematic qualification of aqueous electrode dispersions for inkjet printing. This paper addresses these requirements, covering both product and process specifications.

Human or machine, which one is more intelligent and powerful for performing computing and processing tasks? Over the years, researchers and scientists have spent significant amounts of money and effort to answer this question. Nonetheless, despite some outstanding achievements, replacing humans in the intellectual tasks is not yet a reality. Instead, to compensate for the weakness of machines in some (mostly cognitive) tasks, the idea of putting human in the loop has been introduced and widely accepted. In this paper, the notion of collective hybrid intelligence as a new computing framework and comprehensive.

According to the extensive acceptance and efficiency of crowdsourcing, hybrid intelligence and distributed computing concepts, the authors have come up with the (complementary) idea of collective hybrid intelligence. In this regard, besides providing a brief review of the efforts made in the related contexts, conceptual foundations and building blocks of the proposed framework are delineated. Moreover, some discussion on architectural and realization issues are presented.

The paper describes the conceptual architecture, workflow and schematic representation of a new hybrid computing concept. Moreover, by introducing three sample scenarios, its benefits, requirements, practical roadmap and architectural notes are explained.

The major contribution of this work is introducing the conceptual foundations to combine and integrate collective intelligence of humans and machines to achieve higher efficiency and (computing) performance. To the best of the authors’ knowledge, this the first study in which such a blessing integration is considered. Therefore, it is believed that the proposed computing concept could inspire researchers toward realizing such unprecedented possibilities in practical and theoretical contexts.