Search results

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

Steer-by-wire (SBW) system mainly relies on sensors, controllers and motors to replace the traditionally mechanical transmission mechanism to realize steering functions. However, the sensors in the SBW system are particularly vulnerable to external influences, which can cause systemic faults, leading to poor steering performance and even system instability. Therefore, this paper aims to adopt a fault-tolerant control method to solve the safety problem of the SBW system caused by sensors failure.

This paper proposes an active fault-tolerant control framework to deal with sensors failure in the SBW system by hierarchically introducing fault observer, fault estimator, fault reconstructor. Firstly, the fault observer is used to obtain the observation output of the SBW system and then obtain the residual between the observation output and the SBW system output. And then judge whether the SBW system fails according to the residual. Secondly, dependent on the residual obtained by the fault observer, a fault estimator is designed using bounded real lemma and regional pole configuration to estimate the amplitude and time-varying characteristics of the faulty sensor. Eventually, a fault reconstructor is designed based on the estimation value of sensors fault obtained by the fault estimator and SBW system output to tolerate the faulty sensor.

The numerical analysis shows that the fault observer can be rapidly activated to detect the fault while the sensors fault occurs. Moreover, the estimation accuracy of the fault estimator can reach to 98%, and the fault reconstructor can make the faulty SBW system to retain the steering characteristics, comparing to those of the fault-free SBW system. In addition, it was verified for the feasibility and effectiveness of the proposed control framework.

As the SBW fault diagnosis and fault-tolerant control in this paper only carry out numerical simulation research on sensors faults in matrix and laboratory/Simulink, the subsequent hardware in the loop test is needed for further verification.

Aiming at the SBW system with parameter perturbation and sensors failure, this paper proposes an active fault-tolerant control framework, which integrates fault observer, fault estimator and fault reconstructor so that the steering performance of SBW system with sensors faults is basically consistent with that of the fault-free SBW system.

The brake controller is a key component of the locomotive brake system. It is essential to study its safety.

This paper summarizes and analyzes typical faults of the brake controller, and proposes four categories of faults: position sensor faults, microswitch faults, mechanical faults and communication faults. Suggestions and methods for improving the safety of the brake controller are also presented.

In this paper, a self-judgment and self-learning dynamic calibration method is proposed, which integrates the linear error of the sensor and the manufacturing and assembly errors of the brake controller to solve the output drift. This paper also proposes a logic for diagnosing and handling microswitch faults. Suggestions are proposed for other faults of brake controller.

The methods proposed in this paper can greatly improve the usability of the brake controller and reduce the failure rate.

Purpose – This study aims to design and build a wireless supervisory control and data acquisition (SCADA) system based on Protocol AX.25 with the aim of monitoring the performance of several parameters in Microhydro Power Plant (MHPP). This system can monitor several MHPP parameters such as voltage, current, frequency, and turbine rotation so that it can be accessed directly at one central location.

Design/Methodology/Approach – The design is done by taking into account the real parameters that exist in the MHPP. Some parameters that become the main object to see the performance of MHPP are voltage, current, frequency, and turbine rotation. The voltage generated by the MHPP must be adjusted to the voltage supplied by State Electricity Company to the consumer, including the phase used. The resulting stream should also be monitored for power to be adjusted to the turbine spin. The generator frequency is kept stable according to the standard frequency of the State Electricity Company generator.

Findings – The remote terminal unit (RTU) system has been simulated using 2 ACS712 current sensors, voltage sensor, zero crossing point, frequency sensor, and rotation sensor functionalized to monitor MHPP parameters. The AX.25 protocol has been applicable in the wireless SCADA network for monitoring the performance of MHPP by embedding in KYL-1020UA transceiver radio using the 433 MHz frequency and the audio frequency shift keying modulation system. Radio transmitter KYL-1020UA has been successfully simulated to send data from sensors to display on the computer through SCADA built applications. The data changes in the RTU section can be displayed properly on the graphic user interface in accordance with the existing display at the MHPP location.

Research Limitations/Implications – There are only two RTUs that will be connected to communicate, in this case MHPP-1 with callsign “RTU-001” and MHPP-2 with callsign “RTU-002.” While the existing devices in the data access section parameters MHPP as master station with callsign “MSSCADA” monitoring the performance of parameters sent from the RTU. There is no collision or error in data transmission. Baudrate is varied at 1,200 bps, 2,400 bps, 4,800 bps, and 9,600 bps for effective throughput calculation and AX.25 protocol efficiency. The transmission distance is varied at 100 m, 200 m, 300 m, and 500 m to see the bit error rate with baudrate 1,200 bps and 9,600 bps.

Practical Implications – This product is expected to be applied to several MHPP locations in Aceh Province so that its monitoring system is more centralized and efficient.

Originality/Value – This research if for the efficient monitoring of several MHPP located far apart and can be monitored in one central location so that operators do not have to be located at the plant site.

For many decades, it has been recognized that maintenance activities should be adapted to the specific usage of a system. For that reason, many advanced policies have been developed, such as condition-based and load-based maintenance policies. However, these policies require advanced monitoring techniques and rather detailed understanding of the failure behavior, which requires the support of an OEM or expert, prohibiting application by an operator in many cases. The present work proposes a maintenance policy that relieves the high (technical) demands set by these existing policies and provides a more accurate specification of the required (dynamic) maintenance interval than traditional usage-based maintenance.

The methodology followed starts with a review and critical assessment of existing maintenance policies, which are classified according to six different aspects. Based on the need for a technically less demanding policy that appears from this comparison, a new policy is developed. The consecutive steps required for this functional usage profiles based maintenance policy are then critically discussed: usage profile definition, monitoring, profile severity quantification and the possible extension to the fleet level. After the description of the proposed policy, it is demonstrated in three case studies on real systems.

A maintenance policy based on a simple usage registration procedure appears to be feasible, which enables a significantly more efficient maintenance process than the traditional usage-based policies. This is demonstrated by the policy proposed here.

The proposed maintenance policy based on functional usage profiles offers the operators of fleets of systems the opportunity to increase the efficiency and effectiveness of their maintenance process, without the need for a high investment in advanced monitoring systems and in experts interpreting the results.

The original contribution of this work is the explicit definition of a new maintenance policy, which combines the benefits of considering the effects of usage or environment severity with a limited investment in monitoring technology.

The future construction site will be pervasive, context aware and embedded with intelligence. The purpose of this paper is to explore and define the concept of the digital skin of the future smart construction site.

The paper provides a systematic and hierarchical classification of 114 articles from both industry and academia on the digital skin concept and evaluates them. The hierarchical classification is based on application areas relevant to construction, such as augmented reality, building information model-based visualisation, labour tracking, supply chain tracking, safety management, mobile equipment tracking and schedule and progress monitoring. Evaluations of the research papers were conducted based on three pillars: validation of technological feasibility, onsite application and user acceptance testing.

Technologies learned about in the literature review enabled the envisaging of the pervasive construction site of the future. The paper presents scenarios for the future context-aware construction site, including the construction worker, construction procurement management and future real-time safety management systems.

Based on the gaps identified by the review in the body of knowledge and on a broader analysis of technology diffusion, the paper highlights the research challenges to be overcome in the advent of digital skin. The paper recommends that researchers follow a coherent process for smart technology design, development and implementation in order to achieve this vision for the construction industry.

The purpose of this paper is to describe how emerging open standards are replacing traditional industrial networks. Current industrial Ethernet networks are not interoperable; thus, limiting the potential capabilities for the Industrial Internet of Things (IIoT). There is no forthcoming new generation fieldbus standard to integrate into the IIoT and Industry 4.0 revolution. The open platform communications unified architecture (OPC UA) time-sensitive networking (TSN) is a potential vendor-independent successor technology for the factory network. The OPC UA is a data exchange standard for industrial communication, and TSN is an Institute of Electrical and Electronics Engineers standard for Ethernet that supports real-time behaviour. The merging of these open standard solutions can facilitate cross-vendor interoperability for Industry 4.0 and IIoT products.

A brief review of the history of the fieldbus standards is presented, which highlights the shortcomings for current industrial systems in meeting converged traffic solutions. An experimental system for the OPC UA TSN is described to demonstrate an approach to developing a three-layer factory network system with an emphasis on the field layer.

From the multitude of existing industrial network schemes, there is a convergence pathway in solutions based on TSN Ethernet and OPC UA. At the field level, basic timing measurements in this paper show that the OPC UA TSN can meet the basic critical timing requirements for a fieldbus network.

This paper uniquely focuses on the specific fieldbus standards elements of industrial networks evolution and traces the developments from the early history to the current developing integration in IIoT context.

Buildings use approximately 40% of global energy and are responsible for almost a third of the worldwide greenhouse gas emissions. They also utilise about 60% of the world’s electricity. In the last decade, stringent building regulations have led to significant improvements in the quality of the thermal characteristics of many building envelopes. However, similar considerations have not been paid to the number and activities of occupants in a building, which play an increasingly important role in energy consumption, optimisation processes, and indoor air quality. More than 50% of the energy consumption could be saved in Demand Controlled Ventilation (DCV) if accurate information about the number of occupants is readily available (Mysen et al., 2005). But due to privacy concerns, designing a precise occupancy sensing/counting system is a highly challenging task. While several studies count the number of occupants in rooms/zones for the optimisation of energy consumption, insufficient information is available on the comparison, analysis and pros and cons of these occupancy estimation techniques. This paper provides a review of occupancy measurement techniques and also discusses research trends and challenges. Additionally, a novel privacy preserved occupancy monitoring solution is also proposed in this paper. Security analyses of the proposed scheme reveal that the new occupancy monitoring system is privacy preserved compared to other traditional schemes.

Crystallization is the process widely used for components separation and solids purification. The systems for crystallization process evaluation applied so far, involve numerous non-invasive tomographic measurement techniques which suffers from some reported problems. The purpose of this paper is to show the abilities of three-dimensional Electrical Capacitance Tomography (3D ECT) in the context of non-invasive and non-intrusive visualization of crystallization processes. Multiple aspects and problems of ECT imaging, as well as the computer model design to work with the high relative permittivity liquids, have been pointed out.

To design the most efficient (from a mechanical and electrical point of view) 3D ECT sensor structure, the high-precise impedance meter was applied. The three types of sensor were designed, built, and tested. To meet the new concept requirements, the dedicated ECT device has been constructed.

It has been shown that the ECT technique can be applied to the diagnosis of crystallization. The crystals distribution can be identified using this technique. The achieved measurement resolution allows detecting the localization of crystals. The usage of stabilized electrodes improves the sensitivity of the sensor and provides the images better suitable for further analysis.

The dedicated 3D ECT sensor construction has been proposed to increase its sensitivity in the border area, where the crystals grow. Regarding this feature, some new algorithms for the potential field distribution and the sensitivity matrix calculation have been developed. The adaptation of the iterative 3D image reconstruction process has also been described.

The paper aims to promote the development of intelligent materials and the 4D printing technology by introducing recent advances and applications of additive layered manufacturing (ALM) technology of intelligent materials and the development of the 4D printing technology. Also, an arm-type ALM technology of shape memory polymer (SMP) with thermosetting polyurethane is briefly introduced.

This paper begins with an overview of the development and applications of intelligent materials around the world and the 4D printing technology. Then, the authors provide a brief outline of their research on arm-type ALM technology of SMP with thermosetting polyurethane.

The paper provides the recent developments and applications of intelligent materials and 4D printing technology. Then, it is suggested that intelligent materials mixed with different functional materials will be developed, and these types of materials will be more suitable for 4D printing.

This paper overviews the current developments and applications of intelligent materials and its use in 4D printing technology, and briefly states the authors’ research on arm-type ALM technology of SMP with thermosetting polyurethane.