Search results

The main purpose of this paper is to find a simple method to improve the breakdown voltage of BJTs fabricated on SOI.

We have used two‐dimensional device simulation to examine the effect of a collector tub on the collector breakdown of the SOI based BJTs. This method involves creating a collector tub by etching the buried oxide followed by an n‐type implantation on the collector n/n+ junction side.

First, our method reduces the peak electric field at the silicon film‐BOX interface and secondly, the collector‐tub facilitates the collector potential to be absorbed by both collector drift and substrate regions improving the collector breakdown significantly.

An improved breakdown voltage improves the reliability of BJTs on SOI.

Our results show that the BV_CEO of the bipolar transistors with a collector‐tub is enhanced by 2.7 times when compared with a conventional lateral bipolar transistor (LBT) with identical drift region doping. This improvement has an important practical value in the fabrication of SOI‐based LBTs.

This paper aims to study the electric sliding wear performance of a rigid overhead line/contact strips and to find an optimal overhead line/contact strip pair to minimize the wear of the contact strip under direct current (DC) passage.

The tribological characteristics of an overhead line against four contact strips with DC were experimentally investigated using a block-on-disc tester. The wear and temperature of the contact strips were collected and analysed. The severe wear mechanism of the contact strips was discussed.

Using Taguchi’s method, DC was found to be the most important factor affecting the wear and temperature of current collectors, the normal force being the second and the sliding velocity the weakest. The abnormal wear of current collectors was attributed to arc ablation and poor thermal stability of collectors. The wear performances of current collectors could be optimized by matching different Cu-impregnated carbon strips with the Cu–Ag wire and the wear of current collectors could be reduced by selecting the appropriate normal force, DC and sliding velocity.

Among all test parameters such as the DC, normal force, sliding speed and collector type, DC was identified as the most important factor affecting the wear and temperature of contact strips for the first time. The arc ablation and thermal stability of collectors were considered to be two main factors affecting the wear of the collectors.

Cutoff frequency ƒT characteristics for AlGaAs/GaAs HBTs with planar structures are studied, by two‐dimensional simulation, with an emphasis placed on their dependences on the collector parameters. It is shown that the sub‐collector resistance becomes an important factor to achieve a higher ƒT in the high current region, and so it should be made as low as possible. Effects of introducing semi‐insulating external collectors are also studied. It is shown that the introduction of semi‐insulating layer is effective to improve the ƒT characteristics provided that it is slightly away from the intrinsic collector region.

The purpose of the study was to develop a performance flat-plate solar collector that would be used as a solar drier for fruit fig (Ficus carica L). This study proposes how and why solar energy is important for drying the agricultural products. This study aims to expand the domain of solar collector for different purposes and, most important, for agricultural resource normally found in the literature.

The paper opted for an exploratory study using the flat-plate solar collector with drying chamber for drying purposes of agricultural products. During the experiment, the data were collected with moisture content, drying rate of the product and solar irradiation falls on the collector.

This paper describes that how flat-plate collector works for agricultural products and how to reduce the moisture content in the product (fig). Efficiency of collector was evaluated under the ambient temperatures of 24°C. Efficiency also significantly increased from 53 to 55 per cent with an increase in ambient temperature from 22 to 24 °C. Figs (Ficus carica L) were dried in the drying chamber of the flat-plate solar collector. The products were dried at temperature of 55-65°C and 15 to 20 per cent humidity.

Because of this research chosen, the research results are beneficiary for agricultural users for drying purposes. Therefore, the researchers are encouraged to dry the agricultural product with flat-plate solar collector, because it reduced the moisture content of the product very fast.

This paper fulfills an identified need to study that how flat-plat solar collector can be used.

The purpose of this study is to investigate the impact of greening and promotional effort dependent stochastic market demand on the remanufacturer's and the collector's profits when the quality of used products for remanufacturing is uncertain in a reverse supply chain.

The proposed model is developed to obtain optimal profits for the remanufacturer, the collector and the whole supply chain. Both the centralized and decentralized scenarios are considered. To motivate the collector through profit enhancement, the remanufacturer designs a cost-sharing contract. Through numerical examples and sensitivity analysis, the consequences of greenness and promotional effort on optimal profits are investigated.

The results show that the remanufacturer gets benefited from greening and promotional effort enhancement. However, a higher value of minimum acceptable quality level decreases the profits of the manufacturer and the collector. A cost-sharing contract coordinates the supply chain and improves the remanufacturer's and the collector's profits. Besides green innovation, remanufacturing mitigates the harmful effects of waste in the environment.

Two different viewpoints of remanufacturing are considered here – environmental sustainability and economic sustainability. This paper considers a reverse supply chain with a remanufacturer who remanufactures the used products collected by the collector. The quality of used products is uncertain, and customer demand is stochastic, green and promotional effort sensitive. These two types of uncertainty with green and promotional effort sensitive customer demand differs the current paper from the existing literature.

For smooth running of business affairs, there needs to be a coordination among manufacturer, collector and retailer in forward and reverse supply chain. This paper handles the problem of making pricing, collecting and percentage sharing decisions in a closed-loop supply chain. The purpose of this paper is to examine the effect of responsibility sharing percentage on the profits of a manufacturer, a retailer and a collector. The paper further aims to understand the mutual interactions among decision variables and profit functions. It also determines the optimal selling price, optimal time, wholesale price, sharing percentage and optimal return rate in such a manner that the profit function is maximized.

The authors presented a three-echelon model consisting of a manufacturer, a retailer and a collector in the closed-loop supply chain and optimized the profits of each supply chain member. The authors introduced SRR models for the remanufacturing by providing some percentage of physical and financial support to the collector. Optimization techniques have been applied to obtain optimal solutions. Numerical examples and graphical representations of the optimal solutions are provided to illustrate the model.

This study stresses on profitable value retrieval from returned products, and it discusses how responsibility sharing can improve profitability and reduce the workload of an individual. In total, three main results are found. First, sharing and coordination among chain members can improve collector’s profit. Second, supply chain performance may also improve over time. Third, the profit of each member of the supply chain increases with an increase in sharing percentage up to a certain limit. So, the manufacturer can share the responsibility of the collector under a fixed limit.

The main limitation of this model is that there is no difference between manufactured and remanufactured products. There are many correlated issues that need to be further investigated. The future study in this direction may include multi-retailer, stochastic demand patterns.

It is directly utilized by supply chain industries in which coordination among chain members is still needed to maximize profits. This information enables the manufacturer to assist the collector financially or physically for the proper management of the three-layer supply chain. The present work will form a guideline to choose the appropriate parameter(s) and mathematical technique(s) in different situations for remanufacturable products.

From the management point of view, this study delivers the strongest result to remanufacturing companies and for whom effective and efficient coordination among chain members is vital to the overall performance of the supply chain.

There are very few studies that consider the remanufacturing of used products under a fixed time period. The authors considered selling price-sensitive and time-dependent exponentially declining demand. This model is developed by considering all possible help to a collector from manufacturer to collect used products from consumers. This research complements past research by showing coordination among supply chain members within a fixed time horizon.

To cover the main contributions and developments in solar thermal collectors through focusing on materials, heat transfer characteristics and manufacturing challenges.

A range of published papers and internet research including research work on various solar thermal collectors (flat plate, evacuated tubes, and heat pipe tube) were used. Evaluation of solar collectors performance is critiqued to aid solar technologies make the transition into a specific dominant solar collector. The sources are sorted into sections: finding an academic job, general advice, teaching, research and publishing, tenure and organizations.

Provides information about types of solar thermal collectors, indicating what can be added by using evacuated tube collectors instead of flat plate collectors and what can be added by using heat pipe collectors instead of evacuated tubes.

Focusing only on three types of solar thermal collectors (flat plate, evacuated tubes, and heat pipe tube).

Useful source of information for consultancy and impartial advice for graduate students planning to do research in solar thermal technologies.

This paper fulfils identified information about materials and heat transfer properties of materials and manufacturing challenges of these three solar thermal collectors.

This paper aims to analyze the benefits of the blockchain to the circular economy (CE), which is composed of both closed-loop supply chain (CLSC) systems and reverse omnichannel solutions. By ensuring transparency, traceability, visibility and security, the blockchain allows firms to acquire operational capabilities through a CLSC and service capabilities through a reverse omnichannel, which can boost business performance considerably. The related network of relationships can be reinforced by establishing incentives, which entail both smart contracts in the blockchain and active return approaches in CE.

After identifying the boundaries of the theoretical framework, several research hypotheses are developed according to the literature review and emerging gaps. These gaps link to the impact of the blockchain on CE systems (CLSC and reverse omnichannel), as well as the influence on business performance. The hypotheses are then tested using structural equation modeling and adopting a partial least squares-path modeling technique on a dataset composed of 157 firms. Finally, multigroup analysis is used to test the impact of incentives on the research hypotheses.

The blockchain facilitates a more efficient CE system, although reverse omnichannel solutions seldom bring any benefits to performance. The shift from a passive to an active return approach must be carefully evaluated. The CLSC network can benefit from an active return approach by developing appealing incentives for collectors and enhancing the positive effects of the blockchain. In contrast, consumer incentives can have detrimental effects on the blockchain. Various combinations of incentives can only bring a few business performance increases, while collector incentives are vital to reinforce the CE system's operational and service capabilities.

This paper takes a new approach toward the study of CE, which considers a dual circular system composed of a CLSC and a reverse omnichannel. The research explores whether the adoption of blockchain technology enables better return processes by improving the operations in CLSC and services in reverse omnichannel. Finally, this is the first empirical work to evaluate the benefits emerging from incentives, which can activate smart contracts in the blockchain and enable active return approaches in CE.

This study aims to examine the characteristics of ethnographic textile collectors and compare them with the literature regarding fair trade consumers to explore the existence of a possible consumption constellation between collecting and fair trade purchasing.

Purposive sampling was used for the study as it maximized the attainment of significant information related to ethnographic textile collecting. Qualitative data from ethnographic textile collectors (n=12) were collected.

Results suggested that collectors were interested in purchasing high quality, authentic products that expressed their identity and individuality. These are similarities shared with fair trade consumers. Furthermore, collectors' motives to help artisans overcome poverty were evident; a similar value guides fair trade purchasing.

The predominantly female sample of academics may not be representative of the average ethnographic textile collector.

Understanding the multiplicity of products and activities representative of one consumer group's lifestyle is beneficial to both for‐profit and non‐profit organizations in terms of product promotion or donation solicitation. The understanding of these consumers' lifestyle can, in turn, help marketers design and implement effective advertising and fundraising campaigns that improve the livelihood and wellbeing of excluded and disadvantaged people in developing countries.

The paper furthers the knowledge base and understanding of these different consumer segments by providing evidence of a consumption constellation between ethnographic textile collectors and fair trade consumers.

The purpose of this paper is to explore the behaviors that revolve around collecting, the motivations behind these behaviors and the psychological benefits collectors receive from engaging in these collecting behaviors.

A thorough literature review and integration of prominent psychological and social psychology theories are used to propose a conceptual model, several research propositions and potential research questions for future scholarship.

This paper proposes that a collector salient identity and collecting motives drive tension-inducing social and solitary collecting behaviors and that these behaviors in turn reinforce the collector salient identity. Relevant aspects of the collecting phenomenon are explored, and included propositions provide future research direction to validate a proposed conceptual model designed to provide insights into a common consumer behavior.

This paper provides a broad conceptual model and explores several details of consumer collecting behavior as a basis for future research.