Search results

To achieve right-hand circular polarization (RHCP), a 3-dB Wilkinson power divider with a λ/4 phase shifter is used. The crossed-dipoles are placed at almost λ/4 elevation on the ground plane and connected to two coaxial cables. Experiments show that the impedance bandwidth of 49.40% (913.7–1,513.1 MHz) and axial ratio bandwidth (ARBW) of 22.88% (1,145.8–1,441.8 MHz) are achieved.

In this study, a wideband crossed-dipole antenna with circularly polarized (CP) radiation for L-band satellite and radar applications is presented. The proposed CP antenna comprises two orthogonally placed printed dipoles, a quadrature coupler and a box-shaped ground plane.

Furthermore, by fixing the box-shaped ground plane under the radiators, 5.13 dBic RHCP peak gain at 1,300 MHz and maximum half-power beamwidth (HPBW) of 84.5° at 1,170 MHz are realized for the antenna.

Eight metallic walls are connected to four corners of the substrate to stabilize the radiation properties in this study. Results show that the ARBW and front-to-back ratio are improved and the maximum HPBW around 127° across the operating frequency band is achieved. The proposed CP antenna is a good candidate for Global Positioning System (GPS) L2 (1.227 GHz), GPS L5 (1.176 GHz) and air route surveillance radar system at 1,215–1,390 MHz frequency band.

This paper aims to present the design and implementation of a circularly polarized co-planar waveguide (CPW) fed wideband pie-shaped monopole antenna for multi-antenna techniques. Multi-antenna techniques are promising solutions for higher data rate and enhanced reliability of wireless applications. They find numerous applications in 4G/5G networks and in most wireless standards such as wireless local area networks (WLAN), wireless fidelity and worldwide interoperability for microwave access systems to enhance the channel capacity without additional spectrum by means of multi-path propagation techniques.

The antenna is designed to operate at three WLAN frequency bands of 4.8, 5.2 and 5.8 GHz. The measured 10 dB impedance bandwidth of the proposed antenna element is 1.2 GHz (24.23 per cent). The proposed CPW fed, pie-shaped monopole antenna has a gain of 5.4 dB and an efficiency of 72.8 per cent at 4.8 GHz.

To use the proposed antenna in a multi-antenna environment, the antennas have to be placed in a close proximity to each other. The close proximity introduces strong mutual coupling between the antennas, which in turn degrades the performance of multi-antenna systems. A multi-antenna system with two antenna elements has been constructed with an edge to edge spacing of 0.24 λ₀ (15 mm), and the mutual coupling level is −17 dB. To enhance the isolation between the antenna elements, a shorting pin-based interconnected semicircles enclosed decoupling structure is proposed, which improves the isolation by a factor of 12.67 dB at 4.8 GHz.

To validate the performance of the proposed multi-antenna in working environment, the performance metrics such as envelope correlation coefficient (ECC), diversity gain (DG) and total active reflection coefficient (TARC) are computed for the proposed multiple-input multiple-output (MIMO) antenna. The ECC value is 0.000366 at center frequency and below 0.09 for the entire operating bandwidth, which is well below the acceptable level of 0.5 as per 3GPP standard. The DG value lies above 9.5 dB for the entire operating bandwidths and it is well above the minimum value of 3 dB. The TARC values are calculated based on S parameters, and it proves that the proposed antenna a good candidate for the multi-antenna systems.

This paper aims to present a new triangular crinkle-shaped multiband antenna for multiband operation.

This paper refers to increasing the number of resonance frequency by appending triangular crinkle. Experimental frequency results of the presented antenna are 1.60/2.80/4.00/5.80/7.12/8.32/10.06 GHz.

The triangular shaped antenna is manufactured on a low-priced FR-4 substrate with small size and tested. The reported antenna with full size 14 × 14 mm² with a half elliptical ground sheet on the bottom plane of the substrate and a triangular crinkle strip patch in the front of the substrate. The reported antenna has dual polarized, by rectangular slits on the ground sheet can produce the CP radiation on ITU band. The radiation characteristics indicate the mentioned antenna plays good task for multiband structures. Simulation and measured consequences are in desirable agreement and refer to agreeable operation for the introduced antenna.

Also, an evaluation is done based on multiple attribute decision-making method for comparison the proposed monopole antenna with some previously presented multiband monopole antennas.

This paper aims to propose a two-element dual fed ultra-wideband (UWB) multiple input multiple output (MIMO) antenna system with no additional decoupling structures. The antenna operates from 3.1 to 10.6 GHz. The antenna finds its usage in on-body wearable device applications.

The antenna system measures 63.80 × 29.80 × 0.7 mm. The antenna radiating element is designed by using a modified dumbbell-shaped structure. Jean cloth material is used as substrate. The isolation improvement is achieved through spacing between two elements.

The proposed antenna has a very low mutual coupling of S₂₁ < −20 dB and impedance matching of S₁₁ < −10 dB. The radiation characteristics are stable in the antenna operating region. It provides as ECC < 0.01, diversity gain >9.9 dB. The antenna offers low average specific absorption rate (SAR) of 0.169 W/kg. The simulated and measured results are found to be in reasonable match.

The MIMO antenna is proposed for on-body communication, hence, a very thin jean cloth material is used as substrate. This negates the necessity of additional material usage in antenna design and the result range indicates good diversity performance and with a low SAR of 0.169 W/kg for on-body performance. This makes it a suitable candidate for textile antenna application.

Microstrip patch antenna is generally used for several communication purposes particularly in the military and civilian applications. Even though several techniques have been made numerous achievements in several fields, some systems require additional improvements to meet few challenges. Yet, they require application-specific improvement for optimally designing microstrip patch antenna. The paper aims to discuss these issues.

This paper intends to adopt an advanced meta-heuristic search algorithm called as grey wolf optimization (GWO), which is said to be inspired by the hunting behaviour of grey wolves, for the design of patch antenna parameters. The searching for the optimal design of the antenna is paced up using the opposition-based solution search. Moreover, the proposed model derives a nonlinear objective model to aid the design of the solution space of antenna parameters. After executing the simulation model, this paper compares the performance of the proposed GWO-based microstrip patch antenna with several conventional models.

The gain of the proposed model is 27.05 per cent better than WOAD, 2.07 per cent better than AAD, 15.80 per cent better than GAD, 17.49 per cent better than PSAD and 3.77 per cent better than GWAD model. Thus, it has proved that the proposed antenna model has attained high gain, leads to cause superior performance.

This paper presents a technique for designing the microstrip patch antenna, using the proposed GWO algorithm. This is the first work utilizes GWO-based optimization for microstrip patch antenna.

The purpose of this paper is to develop a wireless strain sensor for measuring large strains. The sensor is based on passive ultra high‐frequency radio frequency identification (RFID) technology and it can be embedded into a variety of structures.

Silver ink conductors and RFID tags were printed by the screen printing method on stretchable polyvinyl chloride and fabric substrates. The development of the strain‐sensitive RFID tag was based on the behavior of the selected antenna and substrate materials. Performance of the tags and the effect of mechanical strain on tag functioning were examined.

The results showed that large displacements can be successfully measured wirelessly using a stretchable RFID tag as a strain‐sensitive structure. The behavior of the tag can be modified by selection of the material.

New tag designs, which are more sensitive to small levels of strain and which have a linear response will be the subject for future work. Tag performance under cyclic loading and in a real environment will also be investigated. Future work relating the investigation of practical applications and the system designing for the strain sensor will also be required.

Printing is fast and simple manufacturing process which does not produce much waste or material loss. The sensor is a new application of printed electronics. It also provides new opportunities for system designers.

The paper provides a new kind of wireless strain sensor which can be integrated into many structures (i.e. clothes). The sensor is a new application of printed electronics and it is made from novel materials.

This paper aims to propose a single element, dual feed, polarisation diversity antenna. The proposed antenna operates from 2.9 to 10.6 GHz for covering the entire ultra-wideband (UWB) frequency range. The antenna is designed for usage in massive multiple input multiple output (MIMO) and closed packaging applications.

The size of the antenna is 24 × 24 × 1.6 mm³. The radiating element of the antenna is derived from the Sierpinski–Knopp (SK) fractal geometry for miniaturization of the antenna size. The antenna has a single reflecting stub placed between the two orthogonal feeds, to improve isolation.

The proposed antenna system exhibits S₁₁ < −10 dB, S₂₁ < −15 dB and stable radiation characteristics in the entire operating region. It also offers an envelope correlation coefficient < 0.01, a diversity gain > 9.9 dB and a capacity loss < 0.4 bps/Hz. The simulated and measured outputs were compared and results were found to be in similarity.

The proposed UWB-MIMO antenna has significant size reduction through usage of SK fractal geometry for radiating element. The antenna uses a single radiating element with dual feed. The stub is between the antenna elements which provide a compact and miniaturized MIMO solution for high density packaging applications. The UWB-MIMO antenna provides an isolation better than −20 dB in the entire UWB operating band.

The paper aims to focus on implantable antenna sensors used for biomedical applications. Communication in implantable medical devices (IMDs) is beneficial for continuous monitoring of health. The ability to communicate with exterior equipment is an important aspect of IMD. Thus, the design of an implantable antenna for integration into IMD is important.

In this review, recent developments in IMDs, three types of antenna sensors, which are recommended by researchers for biomedical implants are considered. In this review, design requirements, different types of their antenna, parameters and characteristics in medical implants communication system (MICS) and industrial, scientific and medical (ISM) bands are summarized here. Also, overall current progress in development of implantable antenna sensor, its challenges and the importance of human body characteristics are described.

This article give information about the requirements of implantable antenna sensor designs, types of antennas useful to design implantable devices and their characteristics in MICS and ISM bands. Recent advancement in implantable devices has led to an improvement in human health.

The paper provides useful information on implantable antennas design for biomedical application. The designing of such antennas needs to meet requirements such as compact size, patients’ safety, communication ability and biocompatibility.

Distributed wireless sensor networks (DWSNs) are applied in a variety of applications that can enhance the quality of human life. Batteries are the predominant source of energy in DWSNs. One of the key obstacles in the adoption of DWSNs technology is the limited lifetime of batteries in microsensors. Recharging or replacing depleted batteries can significantly increase costs in DWSNs. The purpose of this paper is to address, through a thorough review, this power challenge in DWSNs and to evaluate a 16‐element equiangular spiral rectenna to harvest ambient microwave energy in real‐life scenarios to supply indoor DWSNs.

The paper focuses on the practical implementation of a rectenna that can be used in electromagnetic energy harvesting. The design and measurement of the rectenna follows a broad overview of rectenna designs reported in the literature.

The paper concludes that the 16‐element equiangular spiral rectenna has the potential to generate power that enables long periods of operation of the DWSNs without human intervention in the power management process, thus reducing maintenance and administration costs.

Research into electromagnetic power harvesting is very limited in the South African context. The paper presents a concise overview of existing power harvesting techniques that will benefit novice researchers in the field of electromagnetic energy harvesting. It concludes with the performance characterisation of a spiral array rectenna.

Propagation characteristics of millimeter wave (mmW) frequencies that are being explored for implementing 5G network are quite different from sub 3GHz frequencies in which 4G network is operating, and hence antenna design for mmW 5G network is going to be significantly different. The purpose of this paper is to bring forth the unique challenges and opportunities of planar antenna design for mmW 5G network.

A lot of notable contemporary work has been investigated for this study and reported in this paper. A comparison of 4G and 5G technologies has been carried out to understand the difference between the air interface of two technologies that governs the antenna design. Important research gaps found after collating the work already done in the field have been bullet pointed for the use by many researchers working in this direction.

Several antenna design considerations have been laid out by the authors of this work, and it has been claimed that mmW 5G antenna design must satisfy these design considerations. In addition, prominent research gaps have been identified and thoroughly discussed.

As research in the field of mmW antenna design for 5G applications is still evolving, a lot of work is currently being done in this area. This study can prove to be important in understanding different challenges, opportunities and current state-of-art in the field of mmW planar antenna design for 5G cellular communication.