Search results

This paper aims to present the design and implementation of a circularly polarized co-planar waveguide (CPW) fed wideband pie-shaped monopole antenna for multi-antenna techniques. Multi-antenna techniques are promising solutions for higher data rate and enhanced reliability of wireless applications. They find numerous applications in 4G/5G networks and in most wireless standards such as wireless local area networks (WLAN), wireless fidelity and worldwide interoperability for microwave access systems to enhance the channel capacity without additional spectrum by means of multi-path propagation techniques.

The antenna is designed to operate at three WLAN frequency bands of 4.8, 5.2 and 5.8 GHz. The measured 10 dB impedance bandwidth of the proposed antenna element is 1.2 GHz (24.23 per cent). The proposed CPW fed, pie-shaped monopole antenna has a gain of 5.4 dB and an efficiency of 72.8 per cent at 4.8 GHz.

To use the proposed antenna in a multi-antenna environment, the antennas have to be placed in a close proximity to each other. The close proximity introduces strong mutual coupling between the antennas, which in turn degrades the performance of multi-antenna systems. A multi-antenna system with two antenna elements has been constructed with an edge to edge spacing of 0.24 λ₀ (15 mm), and the mutual coupling level is −17 dB. To enhance the isolation between the antenna elements, a shorting pin-based interconnected semicircles enclosed decoupling structure is proposed, which improves the isolation by a factor of 12.67 dB at 4.8 GHz.

To validate the performance of the proposed multi-antenna in working environment, the performance metrics such as envelope correlation coefficient (ECC), diversity gain (DG) and total active reflection coefficient (TARC) are computed for the proposed multiple-input multiple-output (MIMO) antenna. The ECC value is 0.000366 at center frequency and below 0.09 for the entire operating bandwidth, which is well below the acceptable level of 0.5 as per 3GPP standard. The DG value lies above 9.5 dB for the entire operating bandwidths and it is well above the minimum value of 3 dB. The TARC values are calculated based on S parameters, and it proves that the proposed antenna a good candidate for the multi-antenna systems.

This paper aims to design a most demanding low profile and compact ultra-wide band (UWB) antenna system for various wireless applications. The performance (in terms of data rate) of UWB system is improved by using multiple-input-multiple-output (MIMO) technology with it. Owing to the overlap of other existing licensed bands with that of UWB, electromagnetic signals can interfere. So, notched band UWB MIMO antenna system reported here which is highly compact, bandwidth efficient, superior data rate and high inter-element isolation comparatively to other reported designs.

A 49 × 49 × 1.6 mm³ quad-port UWB MIMO antenna with specific bandwidth elimination property is designed. The proposed planar MIMO configuration comprises unique four identical “Cordate-shaped” monopole radiators fed by 2.3-mm thick microstrip-lines. The radiators are located right-angled to each other to enhance inter-element isolation. Further, a different approach of slitted-substrate is applied to minimize the overall size and mutual coupling of the MIMO antenna, as a substitute of decoupling and matching structures. The defected ground structure is used to obtain −10 dB impedance bandwidth in entire UWB band, without compromising with the lower cut-off frequency response. Further, to eliminate the undesired resonant band (WLAN at 5.5 GHz) from UWB, a rounded split ring resonator is introduced in monopole patch.

In the entire operating band of 2.8 to 11 GHz, isolation among elements is more than 24 dB, envelope correlation coefficient less than 0.002, diversity gain greater than 9.99 dB and TARC less than −7 dB are obtained at all 4-ports.

The measured parameters of the fabricated prototype antenna on FR4 substrate are found in good agreement with the simulated results. The small variation in software results and hardware results are observed due to hardware design limitations.

The proposed design may be used for any wireless application following in the range of UWB.

It can be shown from graphs of measured parameters of the fabricated prototype antenna. They found to be in good agreement with the simulated results.

The fifth-generation technology 5G, the planned successor to 4G, is a new global standard for mobile networks that brings virtual to reality. 5G wireless technology enables the delivery of high speed, low latency, reliability, 100% coverage and availability to connect number of users as in massive IoT applications.

With expeditious development in wireless communication, the need for enhanced characteristic antenna design such as the size of the antenna, high data rate, demand in traffic, bandwidth, gain and efficiency increases. Various antenna designs are to be explored to meet the needs and achieve trade-offs between antenna size vs cost, high gain and efficiency vs less loss, high B.W and data rate with the selection of appropriate substrate materials and various gain & isolation enhancement techniques.

This paper thus gives scope for miniaturized MIMO antenna design for mobile applications at mm-wave frequency range.

This paper thus gives scope for miniaturized MIMO antenna design for mobile applications at mm-wave frequency range.

This study aims to present dual band reconfigurable MIMO antenna for 5G (sub-6 GHz) and WLAN applications.

To achieve optimum bandwidth, radiation pattern and radiation efficiency, the defected ground structure (DGS) and a rectangular stub connected with the DGS are used. To further cover the sub-6 GHz spectrum (3.4–3.6 GHz) for future 5G communications, a two-element multi-input multi-output (MIMO) antenna configuration is designed by using the single element antenna. The proposed reconfigurable MIMO antenna using a PIN diode is designed on an FR4 substrate with a dielectric constant of 4.4 and a loss tangent of 0.02 and a 35 × 20 × 1.6 mm³ dimension.

The proposed antenna achieved dual operating bands of 3.4–4.1 GHz (5 G sub-6GHz applications) and 4.99–5.16 GHz (WLAN application) in the D = ON state. For D = OFF state, the proposed antenna achieved 3.55–3.65 GHz and 3.66–4.05 GHz frequency bands for 5G (sub-6GHz) applications. In terms of the envelop correlation coefficient, diversity gain, mean effective gain, total active reflection coefficient and isolation between the ports, the proposed antenna’s diversity performance characteristics are investigated and the obtained values are 0.05, 9.9 dB, ±3dB, −4dB, −15dB, respectively.

The fabricated prototype antenna on FR4 substrate has measurable parameters that are in good agreement with the simulated findings. Due to hardware design limitations, there is a minor difference between software and hardware results.

The proposed MIMO antenna is compact and reconfigurable for 5G (sub-6GHz) and WLAN applications, and from the graph, the measurements and simulations have been found to be in close agreement.

The purpose of this study is to design a radio altimeter antenna whose production process is facilitated and can work with multiple-input multiple-output (MIMO) properties to provide space gain on the aircraft.

To create an easy-to-produce MIMO, a two-storied structure consisting of a reflector and a top antenna was designed. The dimensions of the reflector were prevented to get smaller to supply easy production. The unit cell nearly with the same dimensions of a lower frequency was protected through the original cell design. The co-planar structure with the use of a via connection was modified and a structure was achieved with no need to via for easy production, too. Finally, the antennas were placed side by side and the distance between them was optimized to achieve a MIMO operation.

As a result, an easy-to-produce, compact and successful radio altimeter antenna was obtained with high antenna parameters such as 10.14 dBi gain and 10.55 dBi directivity, and the conical pattern along with proper MIMO features, through original reflector surface and top antenna system.

Since radio altimeter antennas require high radiation properties, the microstrip antenna structure is generally used in literature. This paper contributes by presenting the radio altimeter application with antenna-reflective structure participation. The technical solutions were developed during the design, focusing on an easy manufacturing process for both the reflective surface and the upper antenna. Also, the combination of International Telecommunication Union’s recommended features that require high antenna properties was achieved, which is challenging to reach. In addition, by operating the antenna as a successful MIMO, two goals of easy production and space gain on aircraft have been attained at the same time.