Search results

Intelligent diagnosis of equipment faults can effectively avoid the shutdown caused by equipment faults and improve the safety of the equipment. At present, the diagnosis of various kinds of bearing fault information, such as the occurrence, location and degree of fault, can be carried out by machine learning and deep learning and realized through the multiclassification method. However, the multiclassification method is not perfect in distinguishing similar fault categories and visual representation of fault information. To improve the above shortcomings, an end-to-end fault multilabel classification model is proposed for bearing fault diagnosis.

In this model, the labels of each bearing are binarized by using the binary relevance method. Then, the integrated convolutional neural network and gated recurrent unit (CNN-GRU) is employed to classify faults. Different from the general CNN networks, the CNN-GRU network adds multiple GRU layers after the convolutional layers and the pool layers.

The Paderborn University bearing dataset is utilized to demonstrate the practicability of the model. The experimental results show that the average accuracy in test set is 99.7%, and the proposed network is better than multilayer perceptron and CNN in fault diagnosis of bearing, and the multilabel classification method is superior to the multiclassification method. Consequently, the model can intuitively classify faults with higher accuracy.

The fault labels of each bearing are labeled according to the failure or not, the fault location, the damage mode and the damage degree, and then the binary value is obtained. The multilabel problem is transformed into a binary classification problem of each fault label by the binary relevance method, and the predicted probability value of each fault label is directly output in the output layer, which visually distinguishes different fault conditions.

Indoor air quality monitoring is extremely important in urban, industrial areas. Considering the devastating effect of declining quality of air in major part of the countries like India and China, it is highly recommended to monitor the quality of air which can help people with respiratory diseases, children and elderly people to take necessary precautions and stay safe at their homes. The purpose of this study is to detect air quality and perform predictions which could be part of smart home automation with the use of newer technology.

This study proposes an Internet-of-Things (IoT)-based air quality measurement, warning and prediction system for ambient assisted living. The proposed ambient assisted living system consists of low-cost air quality sensors and ESP32 controller with new generation embedded system architecture. It can detect Indoor Air Quality parameters like CO, PM2.5, NO2, O3, NH3, temperature, pressure, humidity, etc. The low cost sensor data are calibrated using machine learning techniques for performance improvement. The system has a novel prediction model, multiheaded convolutional neural networks-gated recurrent unit which can detect next hour pollution concentration. The model uses a transfer learning (TL) approach for prediction when the system is new and less data available for prediction. Any neighboring site data can be used to transfer knowledge for early predictions for the new system. It can have a mobile-based application which can send warning notifications to users if the Indoor Air Quality parameters exceed the specified threshold values. This is all required to take necessary measures against bad air quality.

The IoT-based system has implemented the TL framework, and the results of this study showed that the system works efficiently with performance improvement of 55.42% in RMSE scores for prediction at new target system with insufficient data.

This study demonstrates the implementation of an IoT system which uses low-cost sensors and deep learning model for predicting pollution concentration. The system is tackling the issues of the low-cost sensors for better performance. The novel approach of pretrained models and TL work very well at the new system having data insufficiency issues. This study contributes significantly with the usage of low-cost sensors, open-source advanced technology and performance improvement in prediction ability at new systems. Experimental results and findings are disclosed in this study. This will help install multiple new cost-effective monitoring stations in smart city for pollution forecasting.

The present study was designed to investigate eight research questions that are related to the analysis and the detection of dialectal Arabic hate speech that targeted African refugees and illegal migrants on the YouTube Algerian space.

The transfer learning approach which recently presents the state-of-the-art approach in natural language processing tasks has been exploited to classify and detect hate speech in Algerian dialectal Arabic. Besides, a descriptive analysis has been conducted to answer the analytical research questions that aim at measuring and evaluating the presence of the anti-refugee/migrant discourse on the YouTube social platform.

Data analysis revealed that there has been a gradual modest increase in the number of anti-refugee/migrant hateful comments on YouTube since 2014, a sharp rise in 2017 and a sharp decline in later years until 2021. Furthermore, our findings stemming from classifying hate content using multilingual and monolingual pre-trained language transformers demonstrate a good performance of the AraBERT monolingual transformer in comparison with the monodialectal transformer DziriBERT and the cross-lingual transformers mBERT and XLM-R.

Automatic hate speech detection in languages other than English is quite a challenging task that the literature has tried to address by various approaches of machine learning. Although the recent approach of cross-lingual transfer learning offers a promising solution, tackling this problem in the context of the Arabic language, particularly dialectal Arabic makes it even more challenging. Our results cast a new light on the actual ability of the transfer learning approach to deal with low-resource languages that widely differ from high-resource languages as well as other Latin-based, low-resource languages.

Decision-making in human beings is affected by emotions and sentiments. The affective computing takes this into account, intending to tailor decision support to the emotional states of people. However, the representation and classification of emotions is a very challenging task. The study used customized methods of deep learning models to aid in the accurate classification of emotions and sentiments.

The present study presents affective computing model using both text and image data. The text-based affective computing was conducted on four standard datasets using three deep learning customized models, namely LSTM, GRU and CNN. The study used four variants of deep learning including the LSTM model, LSTM model with GloVe embeddings, Bi-directional LSTM model and LSTM model with attention layer.

The result suggests that the proposed method outperforms the earlier methods. For image-based affective computing, the data was extracted from Instagram, and Facial emotion recognition was carried out using three deep learning models, namely CNN, transfer learning with VGG-19 model and transfer learning with ResNet-18 model. The results suggest that the proposed methods for both text and image can be used for affective computing and aid in decision-making.

The study used deep learning for affective computing. Earlier studies have used machine learning algorithms for affective computing. However, the present study uses deep learning for affective computing.

Aspect-based sentiment analysis (ASA) is a task of sentiment analysis that requires predicting aspect sentiment polarity for a given sentence. Many traditional techniques use graph-based mechanisms, which reduce prediction accuracy and introduce large amounts of noise. The other problem with graph-based mechanisms is that for some context words, the feelings change depending on the aspect, and therefore it is impossible to draw conclusions on their own. ASA is challenging because a given sentence can reveal complicated feelings about multiple aspects.

This research proposed an optimized attention-based DL model known as optimized aspect and self-attention aware long short-term memory for target-based semantic analysis (OAS-LSTM-TSA). The proposed model goes through three phases: preprocessing, aspect extraction and classification. Aspect extraction is done using a double-layered convolutional neural network (DL-CNN). The optimized aspect and self-attention embedded LSTM (OAS-LSTM) is used to classify aspect sentiment into three classes: positive, neutral and negative.

To detect and classify sentiment polarity of the aspect using the optimized aspect and self-attention embedded LSTM (OAS-LSTM) model. The results of the proposed method revealed that it achieves a high accuracy of 95.3 per cent for the restaurant dataset and 96.7 per cent for the laptop dataset.

The novelty of the research work is the addition of two effective attention layers in the network model, loss function reduction and accuracy enhancement, using a recent efficient optimization algorithm. The loss function in OAS-LSTM is minimized using the adaptive pelican optimization algorithm, thus increasing the accuracy rate. The performance of the proposed method is validated on four real-time datasets, Rest14, Lap14, Rest15 and Rest16, for various performance metrics.

Taking into consideration the current human need for agricultural produce such as rice that requires water for growth, the optimal consumption of this valuable liquid is important. Unfortunately, the traditional use of water by humans for agricultural purposes contradicts the concept of optimal consumption. Therefore, designing and implementing a mechanized irrigation system is of the highest importance. This system includes hardware equipment such as liquid altimeter sensors, valves and pumps which have a failure phenomenon as an integral part, causing faults in the system. Naturally, these faults occur at probable time intervals, and the probability function with exponential distribution is used to simulate this interval. Thus, before the implementation of such high-cost systems, its evaluation is essential during the design phase.

The proposed approach included two main steps: offline and online. The offline phase included the simulation of the studied system (i.e. the irrigation system of paddy fields) and the acquisition of a data set for training machine learning algorithms such as decision trees to detect, locate (classification) and evaluate faults. In the online phase, C5.0 decision trees trained in the offline phase were used on a stream of data generated by the system.

The proposed approach is a comprehensive online component-oriented method, which is a combination of supervised machine learning methods to investigate system faults. Each of these methods is considered a component determined by the dimensions and complexity of the case study (to discover, classify and evaluate fault tolerance). These components are placed together in the form of a process framework so that the appropriate method for each component is obtained based on comparison with other machine learning methods. As a result, depending on the conditions under study, the most efficient method is selected in the components. Before the system implementation phase, its reliability is checked by evaluating the predicted faults (in the system design phase). Therefore, this approach avoids the construction of a high-risk system. Compared to existing methods, the proposed approach is more comprehensive and has greater flexibility.

By expanding the dimensions of the problem, the model verification space grows exponentially using automata.

Unlike the existing methods that only examine one or two aspects of fault analysis such as fault detection, classification and fault-tolerance evaluation, this paper proposes a comprehensive process-oriented approach that investigates all three aspects of fault analysis concurrently.

The purpose of this study is to investigate how book group recommendations can be used as a meaningful way to suggest suitable books to users, given the increasing number of individuals engaging in sharing and discussing books on the web.

The authors propose reviews fine-grained classification (CFGC) and its related models such as CFGC1 for book group recommendation. These models can categorize reviews successively by function and role. Constructing the BERT-BiLSTM model to classify the reviews by function. The frequency characteristics of the reviews are mined by word frequency analysis, and the relationship between reviews and total book score is mined by correlation analysis. Then, the reviews are classified into three roles: celebrity, general and passerby. Finally, the authors can form user groups, mine group features and combine group features with book fine-grained ratings to make book group recommendations.

Overall, the best recommendations are made by Synopsis comments, with the accuracy, recall, F-value and Hellinger distance of 52.9%, 60.0%, 56.3% and 0.163, respectively. The F1 index of the recommendations based on the author and the writing comments is improved by 2.5% and 0.4%, respectively, compared to the Synopsis comments.

Previous studies on book recommendation often recommend relevant books for users by mining the similarity between books, so the set of book recommendations recommended to users, especially to groups, always focuses on the few types. The proposed method can effectively ensure the diversity of recommendations by mining users’ tendency to different review attributes of books and recommending books for the groups. In addition, this study also investigates which types of reviews should be used to make book recommendations when targeting groups with specific tendencies.

The purpose of this paper is to provide a shorter time cost, high-accuracy fault diagnosis method for water pumps. Water pumps are widely used in industrial equipment and their fault diagnosis is gaining increasing attention. Considering the time-consuming empirical mode decomposition (EMD) method and the more efficient classification provided by the convolutional neural network (CNN) method, a novel classification method based on incomplete empirical mode decomposition (IEMD) and dual-input dual-channel convolutional neural network (DDCNN) composite data is proposed and applied to the fault diagnosis of water pumps.

This paper proposes a data preprocessing method using IEMD combined with mel-frequency cepstrum coefficient (MFCC) and a neural network model of DDCNN. First, the sound signal is decomposed by IEMD to get numerous intrinsic mode functions (IMFs) and a residual (RES). Several IMFs and one RES are then extracted by MFCC features. Ultimately, the obtained features are split into two channels (IMFs one channel; RES one channel) and input into DDCNN.

The Sound Dataset for Malfunctioning Industrial Machine Investigation and Inspection (MIMII dataset) is used to verify the practicability of the method. Experimental results show that decomposition into an IMF is optimal when taking into account the real-time and accuracy of the diagnosis. Compared with EMD, 51.52% of data preprocessing time, 67.25% of network training time and 63.7% of test time are saved and also improve accuracy.

This method can achieve higher accuracy in fault diagnosis with a shorter time cost. Therefore, the fault diagnosis of equipment based on the sound signal in the factory has certain feasibility and research importance.

This method provides a feasible method for mechanical fault diagnosis based on sound signals in industrial applications.

For achieving the profitable human activity recognition (HAR) method, this paper solves the HAR problem under wireless body area network (WBAN) using a developed ensemble learning approach. The purpose of this study is,to solve the HAR problem under WBAN using a developed ensemble learning approach for achieving the profitable HAR method. There are three data sets used for this HAR in WBAN, namely, human activity recognition using smartphones, wireless sensor data mining and Kaggle. The proposed model undergoes four phases, namely, “pre-processing, feature extraction, feature selection and classification.” Here, the data can be preprocessed by artifacts removal and median filtering techniques. Then, the features are extracted by techniques such as “t-Distributed Stochastic Neighbor Embedding”, “Short-time Fourier transform” and statistical approaches. The weighted optimal feature selection is considered as the next step for selecting the important features based on computing the data variance of each class. This new feature selection is achieved by the hybrid coyote Jaya optimization (HCJO). Finally, the meta-heuristic-based ensemble learning approach is used as a new recognition approach with three classifiers, namely, “support vector machine (SVM), deep neural network (DNN) and fuzzy classifiers.” Experimental analysis is performed.

The proposed HCJO algorithm was developed for optimizing the membership function of fuzzy, iteration limit of SVM and hidden neuron count of DNN for getting superior classified outcomes and to enhance the performance of ensemble classification.

The accuracy for enhanced HAR model was pretty high in comparison to conventional models, i.e. higher than 6.66% to fuzzy, 4.34% to DNN, 4.34% to SVM, 7.86% to ensemble and 6.66% to Improved Sealion optimization algorithm-Attention Pyramid-Convolutional Neural Network-AP-CNN, respectively.

The suggested HAR model with WBAN using HCJO algorithm is accurate and improves the effectiveness of the recognition.

With the rapid increase in the number of installed wind turbines (WTs) worldwide, requirements and expenses of maintenance have also increased significantly. The condition monitoring (CM) of WT provides a strong “soft guarantee” for preventive maintenance. The supervisory control and data acquisition (SCADA) system records a huge amount of condition data, which has become an effective means of CM. The main objective of the present study is to summarize the application of SCADA data to fault detection in wind turbines, analyze its advantages and disadvantages and predict the potential of future investigations on the use of SCADA data for fault detection.

The authors first review the means of WT CM and summarize the characteristics of CM based on SCADA data. To ensure the quality of SCADA data, data preprocessing methods are analyzed and compared. Then, the failure modes of the key components are discussed and the SCADA data used for fault detection of each component are compared. Moreover, the fault detection methods for WT are classified and a general framework for fault detection is proposed. Finally, the issues in the WT fault detection method based on SCADA data are reviewed.

Based on the performed analyses, it is found that although the fault detection accuracy based on SCADA data is relatively poor, it has low capital expenses and low computational cost. More specifically, when there is scarce fault data, the normal SCADA data can be used to detect the fault time. However, the specific fault type cannot be identified in this way. When a large amount of fault data are accumulated in the SCADA system, it can not only detect the occurrence time of the fault but also identify the specific fault type.

The main contribution of the present study is to summarize the pre-processing methods for SCADA data, the data required for fault detection of key components and the characteristics of the fault detection model. Then we propose a general fault detection framework for wind turbines based on SCADA data, where the maintenance workers can choose the appropriate fault detection method according to different fault detection requirements and data resources. This article is expected to provide guidance for fault detection based on time-series sensor signals and be of interest to researchers, maintenance workers and managers.