Search results

The purpose of this paper is to examine the use of phragmites australis ash (PAA) in cementitious systems to achieve sustainable construction.

In this paper, the properties of mortar containing PAA as partial cement replacement are determined. The PAA is produced through slow burning in a closed system to minimize the CO₂ emission. A total of four mortar mixes are prepared with PAA replacement levels ranging from 0% to 30% by weight. The water to binder and the proportions of binder to sand are 0.55 and 1:3 by weight, respectively. The properties tested are density, compressive strength, flexural strength, ultrasonic pulse velocity, water absorption by total immersion and capillary rise. Testing is conducted at 1, 7, 28 and 90 days.

While there is a decrease in strength as the amount of PAA increases, there is strong indication of pozzolanic reaction in the presence of PAA. This is in agreement with the results reported by Salvo et al. (2015), where they found noticeable pozzolanic activities in the presence of straw ash, which is rich in SiO₂ and relatively high K₂O content. At 90 days of curing, there is a decrease of 5% in compressive strength at 10% PAA replacement. However, at 20% and 30% replacement, the reduction in compressive strength is 23% and 32%, respectively. The trend in flexural strength and ultrasonic pulse velocity is similar to that in compressive strength. The water absorption by total immersion and capillary rise tends to increase with increasing amounts of PAA in the mix. There seems to be a linear relationship between water absorption and compressive strength at each curing age.

The Phragmites australis plant used in this investigation is obtained from one location and this present a limitation as the type of soil may change the properties. Also one method of slow burning is used. Different burning methods may alter the composition of the PAA.

This outcome of this research will contribute towards sustainable development as it will make use of the waste generated, reduce the amount of energy-intensive cement used in construction and help generate local employment in the area where the Phragmites australis plant grows.

To the best knowledge of the authors, the ash from the Phragmites australis plant has not been used in cementitious system and this research can be considered original as it examines the properties of mortar containing PAA. Also, the process of burning in a closed system using this material.

The objective of this study is to mitigate the risks of a blood shortage. The authors designed two simulation studies to identify the superior methodology that can decrease the impact of a massive national donor shortage.

The simulation designs are triggered by the COVID-19 pandemic. The first simulation examines the company’s choice of strategic partners (regionally and nationally), and the second inspects creating a national coordinated effort to organize a pooled blood inventory that would require blood centers to contribute a small percentage of their monthly donations to become a member.

The results indicate that both methods can significantly manage the risk of stockouts regardless of the availability of safety inventory in a blood center; however, although more effective in reducing the number of shortages per month, creating a national blood pool causes the shortages to be recognized earlier than desired.

The authors contribute to the literature by focusing on the potential risk of blood shortage because it directly impacts healthcare, hospitals’ costs and their ability to provide care. Though a handful of researchers have targeted the study of the blood supply chain, there is not any article that is similar to this study.

This paper aims to study a new halogen-free fame-retardant curing agent 1-aminoethylidenediphosphonate (AAEDP).

The AAEDP was synthesized by phosphoric acid, acetonitrile and ammonia. The chemical structures of AAEDP were characterized by proton nuclear magnetic resonance, mass spectrometry and Fourier transform infrared spectrometer. Thermal gravimetric analysis (TGA) and scanning electron microscope (SEM) would study the thermal properties and the char residues of AAEDP/EP. The thermal stability, mechanical and flame properties and morphology for the char layer of composite materials were separately investigated using TGA, tensile and charpy impact tests, limiting oxygen index (LOI), UL-94 HB flammability standard (UL-94) and SEM.

The results showed that the AAEDP had been prepared successfully. When the intumescent flame retardant was added into the EP, the LOI of composite material was improved.

The AAEDP can be prepared successfully and can improve the flame resistance of composite material.

The AAEDP has excellent flame-retardant properties and produce no toxic fumes when burnt in case of fire.

The results showed that the phosphorus content of AAEDP was 2.958 Wt.%; the impact and tensile strength of the composite material were 6.417 kJ m⁻² and 38.0 MPa, respectively; and the LOI and UL-94 were 29.7% and V-0 ranking, respectively. The TGA results indicated that the carbon residue ratio can be increased by 1000°C in air. The denser and more uniform structure of residual carbon prevents heat transfer and diffusion, restricts the production of combustible gas and reduces the rate of heat release.

The aim of this study is to investigate the usability of horsetail, sunflower stalk, wheat stalk and corn stalk ashes as additives in paints and their performance against corrosion resistance when used.

The ashes of horsetail, sunflower stalk, wheat stalk and corn stalk were investigated in this study in single, binary and ternary combinations with three different percentages as additives in paints. Samples of concrete with any combinations of ashes resisted against the corrosion of steel reinforcements, but horsetail ash proved to be the most effective.

It can be said that these research results show that the paint containing horsetail ash is an excellent coating material that can be used in paints for the corrosion resistance of steel in reinforced concrete. The corrosion rate decreased with the increase in the amount of reactive SiO₂. There was less mass loss with the formation of resistance against corrosion in the horsetail ash added concretes. That is why horsetail ash is one of the most effective options for the aforementioned purpose.

Being cheap and easily obtainable, the materials used for coating in this study are perfect candidates for industrial use.

Due to the impact of the pandemic that enforced mass closures and lock downs, galleries, libraries, archives, and museums [GLAM] institutions around the world were required to re-think how they interacted with the public. As a result of the measures that enforced isolation, distancing, and increased hygiene requirements, the usefulness of virtual technologies as a storytelling medium has come into sharper focus. This chapter will explore the emergence of augmented reality as a viable post-COVID-19 solution to meaningful digital narrative creation and user interaction in the museum environment. This chapter will concentrate on the development of a project between the University of South Australia [UniSA] and the South Australian Museum [SAM] to explore how it might be possible to create sustainable immersive stories within this environment.

This study aims to determine the maximum extent of damage in the threat zones, the result of a catastrophic failure in one liquefied petroleum gas storage sphere, located in storage and transfer center in Hassi R’Mel city, Algeria.

To reach the desired results, we relied on ALOHA® v. 5.4.7 software (Areal Locations of Hazardous Atmospheres) for accidents simulation, and on Google Earth as an output tool to show results on the city map.

The results prove that the city of Hassi R’Mel is almost completely threatened by thermal effects resulting from a boiling liquid expanding vapor explosion phenomenon, which can reach a distance of 3.9 km.

Determining the extent to which the damages resulting from an industrial accident may reach is of great importance in preventing industrial hazards, as well as in decision-making in the field of urbanization.

After completion of this case study, students will be able to describe the funding path for start-ups, including the amounts and profiles of the usual investors or sources of funds, according to the moment in their life cycle and the characteristics of the initiative; highlight the challenges faced by start-up founders in weak entrepreneurial ecosystems and risky institutional environments; and argue in favor of or against different modes and typical instruments of venture capital (VC) investments in the early stages of new businesses, each of them different regarding dilutions, valuation potential, depth of negotiations and term sheets.

Asistensi, a technology and telemedicine start-up founded in 2020 in Venezuela by three entrepreneurs (Andrés Simón González-Silén, Luis Enrique Velásquez and Armando Baquero), raised US$3m in less than a year in a seed round in which it attracted the attention of professional VC funds such as Mountain Nazca, Alma Mundi Ventures and 468 Capital. Everything was set for launching operations in Mexico and the Dominican Republic in April 2021. However, a series of difficulties led to higher expenditure than planned, prompting the entrepreneurs to seek additional capital. The decision on the financial instrument to be associated with the potential valuation and shareholder dilution figures has been posed as a dilemma.

The case study focuses on understanding the start-up financing process. It can be used effectively in management- and finance-related subjects for graduate students taking introductory topics in entrepreneurship and entrepreneurial finance, as well as introductory executive education courses in entrepreneurship, entrepreneurial finance and VC.

Teaching notes are available for educators only.

CSS3: Entrepreneurship

Used clothes supply chains are becoming increasingly complex, fragmented and less transparent due to rising volumes of discarded clothes and its dispersed reverse logistics operations across the Global North (GN) and Global South (GS). While it has a promising impact on circular economy and international trade growth, increasing exports of used clothes and overflowing landfills raise some negative concerns on its overall sustainability. This paper addresses the dichotomy that exists in terms of interpreting the sustainability credentials of used clothes supply chains.

A systematic literature review was carried out and 55 articles were examined to identify the triple bottom line (TBL) sustainability impacts of used clothes supply chains. TBL sustainability issues were identified, reflected through the lens of natural resource-based view and interpreted in the form of propositions.

The paper pinpoints seven TBL sustainability concerns and prescribes three sets of strategic resources required in glocal used clothes supply chains for mitigating these. These are (1) slowing the supply chain by tackling poor quality, overproduction and oversupply issues, (2) improving logistics/supply chain infrastructure and ecosystem collaboration and (2) embedding transparent environmental, social and governance (ESG) measures taken by both value chain actors and regulatory bodies, for embracing system-level sustainable development.

This is one of the first studies to analyse TBL sustainability of glocal north–south used clothes supply chains. The study is unique in terms of its scope and contribution to the sustainable supply chain literature.