Search results

This study aims to evaluate the caffeinated drinks, levels of vitamin D and calcium in the blood, and their relationship to bone mineral density (BMD) in osteoporotic women in Al-Ahsa Saudi Arabia.

This study included 85 women over approximately 18 months with ages ranging from 40 to 70 years who were evaluated in the laboratory via blood analysis. Moreover, sociodemographic data and information on health and nutritional awareness were collected via a questionnaire. The BMD was measured by dual-energy X-ray absorptiometry (DXA) and considered osteopenia when the T value total of the lumbar spine or hip was between −1 and −2.5 and osteoporosis < −2.5. Blood levels of vitamin D and calcium were measured via blood analysis.

There were 54.1% and 45.9% of women who suffered from osteoporosis and low BMD, respectively. There was a significant difference in the number of osteoporotic, and low bone mineral mass groups in marital status (p = 0.04), but no difference was found in age and educational level. A significant difference (p = 0.01) between low bone mass and osteoporosis groups in heights. BMD was significantly and negatively correlated with vitamin D in the blood in individuals with osteoporosis (r = −0.358, P = 0.014). In addition, there was a significant negative correlation between calcium in the blood and total samples (r = −0.355, P = 0.0578). There was a negative significant relationship between calcium supplements and BMD in individuals with low BMD (rt = −0.279, P = 0.041). There was a significant association between cola intake with the occurrence of low BMD (p = 0.027), whereas tea drinking was not associated with risk in both groups.

The study indicated that there is a direct relationship between osteoporosis and low bone mass with different variables. This study was conducted to address the lack of research related to the levels of vitamin D and calcium in the blood and their relationship with BMD in women with low BMD and osteoporosis in Al-Ahsa province-KSA.

Sex and age estimation is important, particularly when information about the deceased is unavailable. There are limited radiological studies investigating side, sex and age differences in normal ankle morphometric parameters. The authors’ goal was to evaluate different ankle joint morphometric measurements and document variations among Egyptians.

A prospective study was conducted throughout 23 months on 203 (100 males and 103 females) adult Egyptians, aged between 20-69 years old, who were referred for a plain x-ray of bilateral normal ankle joints.

Ankle parameters showed no statistical difference between both sides, except for tarsal width (TaW) which was significantly higher on right than left side (26.92 ± 2.66 vs 26.18 ± 2.65 mm). Males showed significantly higher morphometric values except for anteroposterior gap (APG) and talus height (TaH) which were significantly higher in females (2.29 ± 0.80 vs 1.80 ± 0.61 mm and 13.01 ± 1.68 vs 11.87 ± 1.91 mm, respectively). There was significant increase in tibial arc length, APG, distance of level of MTiTh from anterior limit of mortise, distance of level of MTiTh from vertex of mortise, sagittal distance between tibial and talar vertices and sagittal radius of trochlea tali arc in old age group compared to young one. A significant decrease in tibial width, malleolar width, TaW and TaH was noted in old age group compared to young one.

Ankle joints of both sides are mostly symmetrical; however, there are significant differences in most morphometric values due to sex and age factors. These findings may be essential during side, sex and age determination.

The purpose of this study is to advance the application of pulverised cow bone ash (PCBA) as a partial replacement of cement in soil stabilisation for the production of bricks. The study investigated the impact of PCBA substitution on the characteristic strength of clay bricks under variant curing media.

Dried cow bones were pulverised, and an energy-dispersive X-ray fluorescence test was conducted on PCBA samples to determine the chemical constituents and ascertain the pozzolanic characteristics. Ordinary Portland cement (OPC) and PCBA were blended at 100%, 75%, 50%, 25% and 0% of cement substitution by mass to stabilise lateritic clay at 10% total binder content for the production of bricks. The binder-to-lateritic clay matrixes were used to produce clay bricks and cylinders for compressive and splitting tensile strength tests, respectively.

The study found that PCBA and OPC have similar chemical compositions. The strength of the clay bricks increased with curing age, and the thermal curing of clay bricks positively impacted the strength development. The study established that PCBA is a suitable substitute for cement, up to 25% for stabilisation in clay brick production.

Construction stakeholders can successfully use a PCBA-OPC binder blend of 1:3 to stabilise clay at 10% total binder content for the production of bricks. The stabilised clay bricks should be cured at an elevated temperature of approximately 90°C for 48 h to achieve satisfactory performance.

The PCBA-OPC binder blend provides adequate soil stabilisation for the production of clay bricks and curing the clay bricks at elevated temperature. This aspect of the biomass/OPC binder blend has not been explored for brick production, and this is important for the reduction of the environmental impacts of cement production and waste from abattoirs.

This study examines the osteoconductive and healing capabilities of locally implanted synthetic hydroxyapatite (sHAp) derived from eggshells in the central incisor sockets of rats.

Toxicity experiments were conducted in vitro and in vivo, to testify the safety dosage of sHAp. Around 24 mature male Sprague–Dawley (SD) rats had their upper central incisors extracted. The rats were placed into three groups of eight rats each: Group 1: the sockets of extracted central incisors were left unfilled (control), Group 2: filled up with commercially available hydroxyapatite (HAp) and Group 3: implanted with sHAp locally retrieved from eggshells. After extraction, four rats from each group were sacrificed at 2nd and 4th weeks. Maxillary tissue sections were obtained and stained with hematoxylin and eosin (H&E) and Masson’s trichome (MT) staining. Anti-osteocalcin (OCN) and proliferating cell nuclear antigen (PCNA) were used primary antibodies for immunohistochemistry (IHC) special labeling.

The results showed that the locally implanted sHAp was non-toxic and safe in cell lines (human osteoblast and fibroblast) and animals. Histological analysis of H&E, MT and IHC showed that the sockets treated with locally implanted sHAp from eggshells were filled with new bone tissue of comparable thickness to other groups.

This unique technique uses locally implanted eggshell-derived sHAp with osteoconductive characteristics. In an in vivo model, sHAps increased OCN and PCNA expression to improve bone repair.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

Effective cognitive functioning elucidates the orchestrated interplay of diverse mental faculties in addressing daily tasks, potentially indicative of an improved state of an individual’s health. Linked to this is the potential role of life satisfaction, which may aid individuals in better managing their health-related challenges. The purpose this study is to examine whether the cognitive functioning and life satisfaction levels of elderly individuals serve as predictors of their subjective health complaints.

The research involved a cohort of 126 elderly community residents. The assessment tools used encompassed a socio-demographic questionnaire, the mini-mental state examination (MMSE), the scale of subjective health complaints and a life satisfaction scale.

The findings reveal that both cognitive functioning and life satisfaction are predictive variables for subjective health complaints, validated in both the original sample and simulated samples.

This study’s innovation lies in highlighting the importance of cognitive functioning and life satisfaction among the elderly population as explanatory factors for subjective health complaints. Consequently, these dimensions warrant consideration in specialized intervention programs aimed at promoting the health and quality of life among the elderly.

This study aims to propose the reuse of PA12 (powder) in another AM process, binder jettiinng, which is less sensitive to the chemical and mechanical degradation of the powder after multiple cycles in the laser system.

The experimental process for evaluating the reuse of SLS powders in a subsequent binder jetting process consists of four phases: powder characterization, bonding analysis, mixture testing and mixture characteristics. Analyses were carried out using techniques such as Fourier Transform Infrared Spectroscopy, scanning electron microscopy, thermogravimetric analysis and stress–strain tests for tension and compression. The surface roughness, color, hardness and density of the new mixture were also determined to find physical characteristics. A Taguchi design L8 was used to search for a mixture with the best mechanical strength.

The results indicated that the integration of waste powder PA12 with calcium sulfate hemihydrate (CSH) generates appropriate particle distribution with rounded particles of PA12 that improve powder flowability. The micropores observed with less than 60 µm, facilitated binder and infiltrant penetration on 3D parts. The 60/40 (CSH-PA12) mixture with epoxy resin postprocessing was found to be the best-bonded mixture in mechanical testing, rugosity and hardness results. The new CSH-PA12 mixture resulted lighter and stronger than the CSH powder commonly used in binder jetting technology.

This study adds value to the polymer powder bed fusion process by using its waste in a circular process. The novel reuse of PA12 waste in an established process was achieved in an accessible and economical manner.

The purpose of this study is to analyse the mediating effect of friends and family as sources of perceived social support in the relationship between loneliness and depressive symptoms.

Survey data sample consisted of 733 university students from January to May 2023. Participants completed the UCLA loneliness scales, Multidimensional Scale of Perceived Social Support (MPSS) and Depression, Anxiety and Stress Scale (DASS-21). The SPSS programme with PROCESS macro (Model 6) was used to test the hypothesis regarding the mediation effect.

The bootstrap analysis found that friends as a source of social support mediated the relationship between loneliness and depressive symptoms. Similarly, loneliness had a significant indirect effect on depressive symptoms through the mediation of family as a source of social support. Moreover, it was found that the relationships of friends and family as sources of social support mediated the association of the aforementioned variables.

This research advances our understanding of social support sources from friends and family amongst university students whilst providing suggestions for interventions tackling loneliness and depressive symptoms in a university setting.

Waiting for a bus may represent a period of intense exposure to traffic particles in hot and noisy conditions in the street. To lessen the particle load and tackle heat in bus stops a shelter was equipped with an electrostatic precipitator and a three-step adiabatic cooling system capable of dynamically adjust its operation according to actual conditions. This study evaluates the effectiveness of the Airbitat Oasis Smart Bus Stop, as the shelter was called, to provide clean and cool air.

The particle exposure experienced in this innovative shelter was contrasted with that in a conventional shelter located right next to it. Mass concentrations of fine particles and black carbon, and particle number concentration (as a proxy of ultrafine particles) were simultaneously measured in both shelters. Air temperature, relative humidity and noise level were also measured.

The new shelter did not perform as expected. It only slightly reduced the abundance of fine particles (−6.5%), but not of ultrafine particles and black carbon. Similarly, it reduced air temperature (−1 °C), but increased relative humidity (3%). Its operation did not generate additional noise.

The shelter's poor performance was presumably due to design flaws induced by a lack of knowledge on traffic particles and fluid dynamics in urban environments. This is an example where harnessing technology without understanding the problem to solve does not work.

It is uncommon to come across case studies like this one in which the performance and effectiveness of urban infrastructure can be assessed under real-life service settings.

The protection of industrial heritage emerged as a major concern when those buildings and installations representative of the industry, became at risk. North Africa, considered the geographical gateway to European countries, experienced enormous industrial activity during the French colonial era. Industrial buildings such as the flour mills, were built during this era of colonial rule. Today, a lack of legislation concerning industrial heritage has left this type of buildings with no protection, leading this paper to a preservation process. The aim of this paper is to locate and identify the flour mills of the 19th and 20th centuries in Algeria.

This research consists of cross-referencing data from archived documents against the geographical location.

The results obtained are the first step in the process of preservation. The success of this research can be summarized as follows: identification of 88.46% of the flour mills in Algeria by means of the inventory data collected, and their location, with the use of a crisp logic, the remaining 9.62% with the use of fuzzy logic by the attribution of a “fuzzy radius” with a total localization and identification of 98.08%.

The use of both crisp (Boolean) and fuzzy logic as part of the geographical localization method.