Search results

The purpose of this paper is to prepare novel types of copolymers and terpolymers depending on jojoba, and using them as additives for lubricating oil.

Copolymerization of 1 mole of jojoba with 2 moles of vinyl acetate and copolymerization of 1 mole of jojoba with 2 moles of vinyl pyrrolidone were carried out. Then, two series of terpolymers were prepared by reacting (jojoba: vinyl acetate: alkylacrylate) and (jojoba: vinyl pyrrolidone: alkylacrylate), using free radical chain addition polymerization. Elucidation of the prepared polymers was carried out by using Fourier transform infrared spectroscopy, proton nuclear magnetic resonance and gel permeation chromatography, for determination of weight average molecular weight. The thermal stability of the prepared polymers was determined. The prepared polymers were evaluated as viscosity index improvers and pour point depressants for lubricating oil.

It was found that the viscosity index increases with increasing the alkyl chain length of alkylacrylate. The effect of the monomer type was studied, and it was found that the polymers depending on vinyl acetate have great effect as viscosity index improvers and pour point depressants for lubricating oil.

The polymerization of jojoba as different copolymers and terpolymers was carried out. The great influence of the prepared additives on modification of the viscosity properties and pour point of the oil was observed.

The impact of paid tax return preparers on the horizontal equity (HE) of the federal tax system has significance for regulatory and tax policy reasons. Using multiple analytical techniques to consider data from the Statistics of Income Division's 2000 Individual Model File (IMF), this study shows that the HE measure is generally greater (implying less HE) for the paid-preparer returns than for the self-prepared returns, even after controlling for complexity and other variables that may differ systematically by tax preparation mode.

The purpose of this paper is to prepare amphiphilic block copolymers polyethylene adipate-block-polyethylene glycol (PEA-b-PEG)s and study their performance as plasticizers in rotogravure ink formulations.

Series of amphiphilic block copolymers (PEA-b-PEG1), (PEA-b-PEG2), (PEA-b-PEG3), (PEA-b-PEG4) and (PEA-b-PEG5) were prepared by the reaction of adipic acid, ethylene glycol and polyethylene glycol of different molecular weights (300, 1,000, 2,000, 10,000 and 20,000 g/mol), respectively. Full characterization of the prepared copolymers was achieved using Fourier Transfer Infrared Spectroscopy (FTIR), 1H NMR, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The performance of the prepared copolymers as plasticizers for neat nitrocellulose resin were studied in different formulations, namely, R1, R2, R3, R4 and R5 containing copolymers (PEA-b-PEG1), (PEA-b-PEG2), (PEA-b-PEG3), (PEA-b-PEG4) and (PEA-b-PEG5), respectively. In addition to formula R0 that contains acetyl tributyl citrate (ATBC) as a commercial plasticizer. The mechanical properties, thermal analysis (DSC, TGA) and optical properties of the prepared formulations films were investigated. Theses amphiphilic block copolymers were then applied as plasticizers in different rotogravure ink formulations (F1, F2, F3, F4 and F5) and compared with commercial rotogravure ink formula (F0). The color measurements and optical properties of all formulations were achieved.

It was found that the performance of the prepared copolymers as plasticizers in different formulations based on nitro cellulose resin gives better gloss, adhesion for R1 compared with the other samples and color strength for F1 compared with F0. Finally, all the samples gave excellent plasticizing effect.

The authors believe that type of these materials open the way for a new class of plasticizers that upon application or even degradation gives small ecofriendly molecules (adipic acid and or ethylene glycol moieties) taking into consideration the simplicity of the rout of the synthesis process.

The prepared ecofriendly (PEA-b-PEG)s could be successfully used as plasticizers instead of commercial plasticizer ATBC.

The research provides that the prepared (PEA-b-PEG)s with different molecular weights can act as plasticizers in rotogravure ink formulations, and their performance was acceptable and available.

Historically, paints designed to protect steel and other metals have been formulated using anticorrosive chromate pigments, which are currently under environmental restrictions. During the investigation reported here, various phosphate compounds. The pigments prepared were characterised using a variety of chemical and spectrophotometric methods of analysis including emission atomic absorption, transmission electron microscope, X‐ray diffraction, in addition to thermal gravimetric analysis. The pigments were also evaluated according to relevant international standard testing methods. The phosphates prepared were incorporated into anticorrosive paint formulations, to replace the imported zinc phosphate pigment, containing medium oil alkyd resin, and melamine formaldehyde resin. Paint films obtained were tested in artificial seawater for 28 days for anticorrosion properties. The results indicated that the paint films had good anticorrosive protection properties that could be attributed to the pigments prepared and the resins used.

The prominent role of traditional contract and design‐build methods in the procurement of projects and the importance of planning in the success of the projects prompt this study. The study evaluates the levels of use of project documents and their influence on the outcome of projects procured by the two methods. The purpose of this paper is to assist stakeholders in comparing the documents prepared and the performance of projects procured by traditional contract and design‐build methods.

The study adopted a questionnaire survey approach to achieve its purpose. A field survey of 84 projects made up of 42 traditional contract projects and 42 design‐build projects selected by purposive sampling was conducted. Three categories of variables namely: procurement method, project planning and project outcome were used. Data were collected with the aid of structured questionnaires and analysed to derive and compare the levels of use of selected project plans, levels of project inception, design, tendering, construction and overall planning in projects procured by traditional contract and design‐build methods using percentage, mean and t‐test.

The results reveal that the levels of project stage and overall planning in projects procured by the two methods investigated are the same. However, the levels of use of specific plans and project outcome in the two categories of projects are significantly different. The study considers the difference in the levels of use of project plans to be responsible for the lower delivery time and cost of projects procured by traditional contract method and higher quality standards in projects procured by design‐build method.

The paper has revealed the level of efforts put into the planning of projects procured by traditional contract and design‐build methods and their influence on the performance of the projects. The results will make project stakeholders aware of how to improve their efforts, thereby improving the outcome of the projects.

To prepare of fine particle size magnesium ferrite pigments by sol‐gel method.

Different magnesium ferrite pigments with stoichiometric ratios were prepared by sol‐gel and dispersion methods. The characterisation of magnesium ferrite pigments were based on X‐ray diffraction, transmission electron microscope, particle size distribution, thermal and magnetometric analyses.

The type of polymer and the starting inorganic materials (oxides or salts) have a significant effect on the properties of the magnesium ferrite pigments prepared.

The magnesium ferrite pigments, prepared and used in the work reported here were synthesised from magnesium and iron oxides, oxalates and chlorides. Urea formaldehyde resin and acrylic polymer were used as the dispersing media. Various other materials, e.g. carboxymethyl cellulose, ethoxy methyl cellulose, polyvinylalcohol and 2‐hydroxyethyl methacrylate and polyacrylamide can also be used to achieve similar effect.

The sol‐gel method provided a fine particle size and different particle shapes. Therefore, the method of preparation could be used to produce fibres, films and monoliths.

The magnesium ferrite pigments prepared could be use in numerous paints for steel protection.

Paper aims to preparation of new acid disperse dyes based on thiadiazol derivatives and evaluation of their use as antimicrobial colorants in digital transfer-printing ink formulations for printing onto polyester fabric substrates.

New disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) were prepared and evaluated by different analysis then formulated as colored materials in the ink formulations. The viscosity, dynamic surface tension and particle size distribution of the prepared inks were measured. The printed polyester fabric substrates were tested using a variety of tests, including light fastness, washing, alkali perspiration and Crock fastness, as well as depth of penetration. Density-functional theory (DFT) calculations were carried out at the Becke3-Lee-Yang-parr (B3LYP) level using the 6–311** basis set, and the biological activity of the prepared disperse dyes was investigated.

The obtained results of the physical of the prepared ink revealed that thiadiazol disperse ink is a promising ink formulation for polyester printing and agrees with the quality of the printed polyester fabric. The optimization geometry for molecular structures agreed with the analysis of these compounds. The HOMO/LUMO and energy gap of the studied system were discussed. The molecular docking analysis showed strong interaction with DNA Gyrase and demonstrated to us the high ability of these inks to act as antimicrobial agents.

The prepared inks containing the prepared thiadiazol disperse dye were high-performance and suitable for this type of printing technique, according to the results. The prepared inks resist the growth of microorganisms and thus increase the ink's storage stability.

The prepared disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) can be a promising colorant in different applications, like some types of paint formulations and as a colorant in printing of different fabric substrates.

Different methods have been carried out to prepare barium metaborate pigments and to find out the suitable method of preparation taking into account ease of industrial application and the yield of the product. The properties of the prepared pigments were tested and compared with those of the commercial pigment. The solubility of the prepared pigment was found to be high and needed to be decreased. Many different methods of treatment were used and six grades of barium metaborate pigment were obtained. It was found that the addition of silicate to the prepared pigments has decreased their solubilities.

The purpose of this paper is to prepare cheap and environmentally friendly water soluble polyester coatings through the glycolysis of poly(ethylene terephthalate) (PET) waste.

A secondary value-added polyester coatings were prepared from PET waste. The first step was the de-polymerisation of PET waste by 2,2-dimethyl-1,3-propanediol with different molar ratios in the presence of different concentrations of zinc acetate as trans-esterification catalyst. The de-polymerised product was characterised by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹HNMR), differential scanning calorimetry and hydroxyl values. The polyesters were successfully synthesised by esterification of the glycolysed product with adipic acid, isophthalic acid, 2,2-dimethyl-1,3-propanediol and trimellitic anhydride in different ratios. FTIR and ¹HNMR were used qualitatively and quantitatively to elucidate the structure of the prepared polyesters. Hydroxyl value and the physical properties of the prepared polyesters were also investigated. Two different curing agents were used to prepare the coatings based on the prepared polyesters.

Useful coating products were obtained by chemical (glycolysis) of post consumed PET wastes. The 2,2-dimethyl-1,3-propanediol was found to be good glycol in the glycolysis of PET. It was noticed that the rate of glycolysis increases with increasing the amount of catalyst, time of glycolysis and amount of 2,2-dimethyl-1,3-propanediol. N,N-Dimethylethanol amine was a good neutralising agent used for the preparation of water soluble coatings based on glycolysed product of PET.

The use of waste products like PET waste in water soluble coating systems will bring down the costs of the coatings and will also open a new market of recycled plastic materials and, hence, may provide a potential solution to the problems of solid waste management. It is an attractive option for environmentally friendly and efficient disposal of plastic waste.

The paper provides a potential way to use undesirable PET waste as industrial raw material. The coatings prepared are eco-friendly, soluble in water that can replace other expensive polyester coatings that are soluble in organic solvents and not environmentally coatings.

The purpose of this paper is to synthesize anticorrosion pigments ZnFe₂O₄ from diverse raw materials of various shapes and size of primary particles.

Anticorrosion pigments were synthesized through a high‐temperature process during a solid phase. Zinc ferrites were prepared from hematite (α‐Fe₂O₃), goethite (α‐FeO.OH), magnetite (Fe₃O₄), and specularite (Fe₂O₃) entering into reaction with zinc oxide at temperatures ranging from 600 up to 1,100°C. The nature of the initial raw material, primarily the shape of its particles, affects the shape of the particles of the synthesized zinc ferrite. The formulated zinc ferrites had a rod‐shape, lamellar, and/or isometric shape. The shape of the particles of synthesized zinc ferrites was studied with regard to its effects on the mechanical and corrosion resistance of organic coatings. The obtained pigments were characterized by means of X‐ray diffraction analysis and scanning electron microscopy. The synthesized anticorrosion pigments were used to prepare epoxy coatings and water‐borne styrene‐acrylate coatings that were subjected to post‐application tests for physical‐mechanical properties and anticorrosion properties.

The shape of the particles was identified in the synthesized pigments. X‐ray diffraction analysis revealed the degree of precipitation and lattice parameters. All of the synthesized pigments had good anticorrosion efficiency in an epoxy and in styrene‐acrylate coatings. Compared with a commercially used anticorrosion pigment, their protective power in coatings was demonstrably stronger.

The synthesized pigments can be used conveniently in coatings protecting metal bases against corrosion.

The synthesis of zinc ferrites with different particle shapes for applications in anticorrosion coatings provides a new way of protecting metals against corrosion. Of benefit is the fact that the synthesized pigments do not contain any environmentally harmful substances.