Search results

The purpose of this paper is to generate nitrogen-containing groups in the cotton fabric surface via low-temperature nitrogen plasma as an eco-friendly physical/zero-effluent process. This was done for rendering cotton dye-able with Acid Blue 284, which in fact does not have any direct affinity to fix on it.

Dyeing characteristics of the samples such as color strength (K/S), fastness properties to light, rubbing and perspiration and durability, as well as tensile strength, elongation at break, whiteness, weight loss and wettability in addition to zeta potential of the dyed samples, were determined and compared with untreated fabric. Confirmation and characterization of the plasma-treated samples via chemical modifications and zeta potential was also studied using Fourier transform infrared spectroscopy (FTIR) and Malvern Zetasizer instrumental analysis.

The obtained results of the plasma-treated fabric reflect the following findings: FTIR results indicate the formation of nitrogen-containing groups on cotton fabrics; notable enhancement in the fabric wettability, zeta potential to more positive values and improvement in the dyeability and overall fastness properties of treated cotton fabrics in comparison with untreated fabric; the tensile strength, elongation at break, whiteness and weight % of the plasma treated fabrics are lower than that untreated one; and the durability of the plasma treated fabric decreased with increasing the number of washing cycles.

The novelty addressed here is rendering cotton fabrics dye-able with acid dye via the creation of new cationic nitrogen-containing groups on their surface via nitrogen plasma treatment as an eco-friendly and efficient tool with a physical/zero-effluent process.

The purpose of this study is to check the effectivity of plasma in the natural dyeing of polyester fabric using four natural dyes – Turkey red, Lac, Turmeric and Catechu using plasma and alum mordant. The surface modification on the polyester fabric by plasma along with the use of benign mordant alum is studied. The enhancement of dyeability in polyester fabric with natural dyes is the main focus. Due to surface modification, the wettability increases, which leads to better dye uptake. Better dye uptake and better dye adherence are the main objectives.

Plasma-mediated natural dyeing is the main design of this research work. The effect of plasma treatment on surface modification of synthetic fabric polyester and its subsequent effects on their dyeing with different natural dyes, namely, Turkey red, Lac, Turmeric and Catechu are studied. The dyeability was further enhanced by the use of alum as mordant. The main focus is on the betterment of natural dyeing of polyester fabric using sustainable natural dyes resources for dyeing and to reduce wastewater contamination from the usage of toxic additive chemicals for cleaner production.

Plasma-mediated and alum-mordanted dyeing method facilitated very good dyeability of all the four natural dyes, namely, Turkey red, Lac, Turmeric and Catechu. Color strength (K/S) values and fastness properties of plasma-treated samples were far better than untreated samples. The synergistic effect of plasma and alum mordanting has made natural dyeing of polyester very easy with very good fastness results. Natural dyeing of polyester after 2 min of plasma treatment showed excellent and desirable results. The process is also easy to be adapted by industries.

As polyester is hydrophobic, natural dyeing of polyester fabric is not very easy, but with plasma-mediated natural dyeing, it becomes a very facile dyeing method; thus, there are no limitations. Use of plasma has reduced the need for any chemical additives which are usually added during the dyeing process.

This process of natural dyeing of polyester fabric can be scaled up to industrial dyeing with natural dyes. Plasma pretreatment of the fabric followed by premordanting with alum has facilitated the natural dyeing well.

Use of plasma in place of chemical modifiers can be a green and environmentally friendly approach for sustainable coloration of polyester fabric, providing a clean wet processing for textiles dyeing.

The synergistic effect of plasma-mediated and alum-mordanted natural dyeing of polyester has not been attempted by any researcher. To the best of the authors’ knowledge, this is for the first time that pretreatment with atmospheric plasma followed by alum mordanting of polyester fabric has shown very good dye uptake and fastness properties as the dye molecules could penetrate well after 2 min of the plasma treatment.

This study aims to realize the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified Color Index Pigment Red 57:1 (C.I. Pigment Red 57:1, PR 57:1).

In this paper, the inorganic materials (sepiolite and SiO₂·nH₂O) were used in both PR 57:1 production wastewater treatment and its core-modification. The inorganic material firstly adsorbed 3-hydroxy-2-naphthoic acid (bon acid) in the pigment wastewater to reduce chemical oxygen demand. Then, the inorganic material adsorbed with bon acid was reused to prepare core-modified PR 57:1.

In the pigment wastewater adsorption experiment, it was found that under pH = 3, the adsorption percentage of bon acid by inorganic material can reached up to 46.00%. The pigment characterization results showed that the core-modified PR 57:1 had a core-shell structure. Under UV light irradiation for 1 h, the core-modified PR 57:1 prepared with sepiolite and SiO₂·nH₂O showed total color difference ΔE value of 1.43 and 2.05, respectively, which was lower than that of unmodified PR 57:1 (ΔE = 2.89). In addition, the transmittance of pigment water suspension test results showed that the core-modified PR 57:1 showed better water dispersibility.

This paper attempts to develop a synergistic strategy based on the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified PR 57:1.

The purpose of this paper is to introduce four new organic dyes based on naphthalimide for dye-sensitized solar cells (DSSCs).

Four new dyes based on naphthalimide with substitutions of amine and acetylamine in position C4 were designed in conjugation with substituted carbazole as donor–acceptor (D-A) architecture. The absorption and emission characteristics of the prepared dyes were evaluated in H₂O, DMF and their mixture (DMF:H₂O = 1:1). The feasibility of electron transfer in the DSSCs structure and energy levels were evaluated using electrochemical and density functional theory, which confirm the use of dyes in the DSSCs structure. The DSSCs were prepared using an individual strategy and their optical properties were investigated under the light of AM 1.5.

The prepared dyes exhibit orange color with strong emission at λem = 530–570 nm due to charge transfer with a positive solvatochromic effect. The efficiency of DSSCs based on Dye1-4 1 is: 3.69%, 3.71%, 4.69% and 4.76%. Therefore, the power efficiency increases by about 29 % in the presence of acetylamine group.

The design of new structures of organic dyes should be accompanied by the development of optical and electrical properties. In other words, in addition to the continuous production of electrons, efficient dyes must also be resistant to light to increase the life of the device.

Organic dyes play a key role in the production of electrons in the DSSCs structure. The engineering of these structures and the introduction of widely used but low cost types can play an important role in the development of clean energy production.

The application of organic dyes based on naphthalimide was evaluated in the DSSCs structure and its photovoltaic properties were investigated.

This paper aims to focus on the aqueous extraction of natural dye from haematoxylum campechianum L. bark for finishing the bio-mordant cotton fabrics producing value-added, environment-friendly textile products, for biomedical applications.

The study focuses on the creation of eco-friendly bio-mordant cotton fabric using gallic acid and gelatin, Al³⁺ and Fe²⁺ salts and metal mordant. The optimal pH for extraction, structural characterization and phytochemical analysis of the extracted dye were estimated using UV-visible spectrophotometer, FTIR and qualitative analysis. Variations in electrolyte concentration and pH medium were also considered. The study also examines build-up properties, colorimetric values and fastness characteristics of the colored fabrics.

All the dyed fabrics exhibit very good to excellent in terms of antimicrobial resistance against S. aureus and C. allbicans.

Pre-mordant cotton fabrics with Fe²⁺ and a combination of metal and bio-mordant show higher antibacterial resistance against P. aerugionsa. Further, bio-mordant and a combination of both mordant exhibit excellent UV protection and antioxidant activity performance compared to that of undyed fabrics.

This work opens up a huge potential for producing healthy bioactive-colored fabrics used in medical textiles and other usages.

Reactive dyes are believed to have great potential for nylon dyeing, but these anionic dyes tend to rush toward the nylon at the beginning of the process, resulting in uneven dyeing. Achieving uniformity gets even harder when the dyeing is performed under exposure to eco-friendly technique microwave irradiations. This study aims to achieve rapid and homogenous results by intermittent shaking and non-continuous exposure to microwave.

A set of reactive red dyes, based on the same chromophore and different substituents in the auxochrome part, was applied to the nylon fabric without any leveling agent. A series of experiments were designed to investigate the effect of different dye structures, exhaustion pH, liquor ratio, exhaustion time and fixation time to obtain an optimum recipe under the microwave dyeing technique.

Dyeing performance was characterized based on the color strength, exhaustion and fixation percentages and color fastness values. The characterization showed that better results can be achieved at a liquor ratio of 1:15 at exhaustion pH 2.7 which is also the isoelectric point of nylon, with 5.5 to 7 min of exhaustion and 6 to 8 min of fixation time for different dyes. Microwave dyed samples secured higher color strength values and provided better exhaustion and fixation than the conventional dye samples. Furthermore, the X-ray diffraction results verified that there was no considerable difference in the morphological structure of nylon with microwave exposure.

An applied technique is disclosed in this work to achieve uniform dyeing on nylon 66 with reactive dyes without any leveling agent under exposure to eco-friendly rapid heating microwave irradiations.

The purpose of this research is to develop an environmentally friendly antimicrobial dyeing of cotton fabric from the root of Euclea racemosa. Textile phytochemical finishing is in high demand worldwide because of its low toxicity, low pollution, ease of availability, renewability, pharmacological effects and non-carcinogenic properties, as well as its multifunctionality, rapid process stages and potential health benefit.

The cotton fabric was dyed with aqueous extracts of Euclea racemosa root dyes. Dyes were extracted for 20 min at pH 7.43 at room and boiling temperatures with material-to-liquor ratios (MLRs) of 1:5, 1:10, 1:15 and 1:20, altering one variable at a time, and the cotton fabric was colored using a post-mordanting procedure at 50°C with an MLR of 1:20. Using a properly cleaned Petri plate, the colored samples were tested in vitro for antibacterial activity. A spectrophotometer was used to assess color strength and shade depth, as well as wash fastness and annual rubbing fastness tests for both wet and dry.

L* = 36.29, a* = 58.56, b* = 32.46 and K/S = 0.51 were the CIELAB values for dye extracted at boiling temperature. L* = 47.14, a* = 42.23, b* = 49.61 and K/S = 0.38 were the CIELAB values for dye extracted at room temperature. The wash and rubbing fastness of the dyed samples were outstanding and the dyed cotton fabrics were found antibacterial against Gram-negative bacteria Escherichia coli.

Dyes derived from the E. racemosa root could be used to develop a new antibacterial cotton fabric dye.

The purpose of this study aims to synthesize a novel donor–acceptor dye based on phenothiazine as a donor (D) and nonconjugated spacer was devised and synthesized by condensing of 2,2'-(1H-indene-1,3(2H)-diylidene) dimalononitrile with aldehyde and the practical synthesis methodology as given in Scheme 1.

The prepared phenothiazine dye was systematically experimentally and theoretically examined and characterized using nuclear magnetic resonance spectroscopy (1H,13C NMR), Fourier-transform infrared spectroscopy (IR) and high-resolution mass spectrometry. Density functional theory (DFT) and time-dependent density functional theory DT-DFT calculations were implemented to determine the electronic properties of the new dye

The UV-Vis absorption and fluorescence spectroscopy of the synthesized dye was investigated in a variety of solvents with varying polarities to demonstrate positive solvatochromism correlated with intramolecular charge transfer (ICT). The probe’s quantum yields (Фf) are experimentally measured in ethanol, and the Stokes shifts are found to be in the 4846–9430 cm⁻¹ range.

The findings depicted that the novel (D-π-A) chromophores may act as a significant factor in the organic optoelectronics.

The purpose of this study is to modify the FDM 3D printer to print with polystyrene (PS) microspheres as the printing material, thus enabling bottom-up structural color printing and evaluating structural color printing.

This study chose a range of different heated bed temperatures to determine a suitable temperature for accelerating the self-assembly of photonic crystals and printing structural colors on various substrates. In addition, this study enhanced the structural color by doping PS microspheres with different contents of Acid Black 210 dye and evaluated the color-enhanced structural color by eye and spectrophotometer under different light sources.

The results show that the modified 3D printer can be used for structural color printing, and 50°C is determined as the heated bed temperature. There are significant differences in structural colors when printing under different color backgrounds and material substrates, and corresponding suitable substrates should be selected according to the application. The doping of PS microspheres with varying contents of dye results in different color levels of structural color. As with pigment colors, the visual perception of structural color varies when viewed under different light sources.

This paper proposes to print structural colors low-costly, analyze structural colors under substrate and light source conditions, and expand the structural color gamut by enhancing structural colors, which has positive implications for further research on structural colors as printing colors.

The aim of this paper is to propose a basis upon which accounting reporting can be developed to reflect real values and the real economy. It aims to address the environmental considerations discussed in the UN debate (Bebbington and Unerman, 2020) and the concern for a “better life-world”, which is the theme of this special issue.

Addressing the task involves the application of the philosophy of pragmatic constructivism (which explains how people can relate to their reality in ways that lead to successful action) and the philosophical concept of the “good life” (which establishes the values to be pursued through action and so defines action success). Also, it outlines the necessary characteristics of measurement frameworks if they are to be effective in the development and control of human practices to achieve desired values.

This paper proposes a conceptual framework for guiding the measurement of how a sustainable good life has improved and/or deteriorated as a result of organisational activities. It outlines a system of concepts on basic and instrumental values for analysing the condition of maintaining a sustainable good life in real terms. This is related to the financial results and societal regulations to analyse and adjust controls according to the real economic goals. Also, it provides a system of value measurands to produce valid information about the development of a sustainable good life. The measurand makes accounting reporting reflect the conditions of the good life that constitute the real economy instead of merely the financial economy driven by shareholder capitalism. Providing tools to analyse whether the existing practices of business and social regulations promote or counteract the real economic goals of producing a sustainable good life means the measurement system proposed makes the invisible hand of the market visible.

The mechanism proposed to enable accounting reporting to reflect real values and the real economy is a new conceptual framework that will allow accounting to more fully realise its potential to contribute to a “better world”. In aiming to serve a sustainable good life, accounting reporting will inherently foster ethical social practices.