Nylon dyeing with reactive dyes by intermittent exposure to microwave irradiations to improve leveling

Abstract

Purpose

Reactive dyes are believed to have great potential for nylon dyeing, but these anionic dyes tend to rush toward the nylon at the beginning of the process, resulting in uneven dyeing. Achieving uniformity gets even harder when the dyeing is performed under exposure to eco-friendly technique microwave irradiations. This study aims to achieve rapid and homogenous results by intermittent shaking and non-continuous exposure to microwave.

Design/methodology/approach

A set of reactive red dyes, based on the same chromophore and different substituents in the auxochrome part, was applied to the nylon fabric without any leveling agent. A series of experiments were designed to investigate the effect of different dye structures, exhaustion pH, liquor ratio, exhaustion time and fixation time to obtain an optimum recipe under the microwave dyeing technique.

Findings

Dyeing performance was characterized based on the color strength, exhaustion and fixation percentages and color fastness values. The characterization showed that better results can be achieved at a liquor ratio of 1:15 at exhaustion pH 2.7 which is also the isoelectric point of nylon, with 5.5 to 7 min of exhaustion and 6 to 8 min of fixation time for different dyes. Microwave dyed samples secured higher color strength values and provided better exhaustion and fixation than the conventional dye samples. Furthermore, the X-ray diffraction results verified that there was no considerable difference in the morphological structure of nylon with microwave exposure.

Originality/value

An applied technique is disclosed in this work to achieve uniform dyeing on nylon 66 with reactive dyes without any leveling agent under exposure to eco-friendly rapid heating microwave irradiations.

Citation

Irfan, M., Gao, A. and Hou, A. (2024), "Nylon dyeing with reactive dyes by intermittent exposure to microwave irradiations to improve leveling", Pigment & Resin Technology, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/PRT-04-2024-0041