Search results

This study aims to investigate the relationship between dietary polyamine levels, metabolic risk parameters and anthropometric measurements in postmenopausal women.

This cross-sectional study was conducted with 562 45–64-year-old postmenopausal women who presented to a Family Health Center. To collect the data, the Descriptive Information Form and Food Frequency Questionnaire were used. In the data analysis, numbers, percentages, mean, standard deviation and multiple linear regression analysis were used.

The multiple linear regression analysis demonstrated that dietary putrescine intake was negatively associated with systolic blood pressure (ß = −0.179, p < 0.001), dietary spermidine intake was positively associated with waist circumference (WC) (ß = 0.142, p = 0.013), systolic blood pressure (ß = 0.188, p = 0.001), diastolic blood pressure (ß = 0.218, p < 0.001), body mass index (BMI) (ß = 0.169, p = 0.003) and waist-to-height ratio (WHtR) (ß = 0.156, p = 0.006), and dietary spermine intake was negatively associated with WC (ß = −0.158, p = 0.003), systolic blood pressure (ß = −0.195, p < 0.001), BMI (ß = −0.107, p = 0.042) and WHtR (ß = −0.138, p = 0.009).

Owing to the study’s cross-sectional nature, the lack of succession in the cause–effect relationship, the use of self-report Food Frequency Questionnaire to determine dietary polyamine intake and the inability to analyze seasonal differences are among the limitations of the study.

In this study, an association was determined between dietary polyamines, metabolic risk parameters and anthropometric measurements. The findings suggest that dietary polyamines in human health should be further investigated owing to the increasing metabolic risk parameters.

The study aims to optimize truck routes by minimizing social and economic costs. It introduces a strategy involving diverse drones and their potential for reusing at DNs based on flight range. In HTDRP-DC, trucks can select and transport various drones to LDs to reduce deprivation time. This study estimates the nonlinear deprivation cost function using a linear two-piece-wise function, leading to MILP formulations. A heuristic-based Benders Decomposition approach is implemented to address medium and large instances. Valid inequalities and a heuristic method enhance convergence boundaries, ensuring an efficient solution methodology.

Research has yet to address critical factors in disaster logistics: minimizing the social and economic costs simultaneously and using drones in relief distribution; deprivation as a social cost measures the human suffering from a shortage of relief supplies. The proposed hybrid truck-drone routing problem minimizing deprivation cost (HTDRP-DC) involves distributing relief supplies to dispersed demand nodes with undamaged (LDs) or damaged (DNs) access roads, utilizing multiple trucks and diverse drones. A Benders Decomposition approach is enhanced by accelerating techniques.

Incorporating deprivation and economic costs results in selecting optimal routes, effectively reducing the time required to assist affected areas. Additionally, employing various drone types and their reuse in damaged nodes reduces deprivation time and associated deprivation costs. The study employs valid inequalities and the heuristic method to solve the master problem, substantially reducing computational time and iterations compared to GAMS and classical Benders Decomposition Algorithm. The proposed heuristic-based Benders Decomposition approach is applied to a disaster in Tehran, demonstrating efficient solutions for the HTDRP-DC regarding computational time and convergence rate.

Current research introduces an HTDRP-DC problem that addresses minimizing deprivation costs considering the vehicle’s arrival time as the deprivation time, offering a unique solution to optimize route selection in relief distribution. Furthermore, integrating heuristic methods and valid inequalities into the Benders Decomposition approach enhances its effectiveness in solving complex routing challenges in disaster scenarios.

Equipment performance helps the manufacturing sector achieve operational and financial improvements despite process variations. However, the literature lacks a clear index or metric to quantify the monetary advantages of enhanced equipment performance. Thus, the paper presents two innovative monetary performance measures to estimate the financial advantages of enhancing equipment performance by isolating the effect of manufacturing fluctuations such as product mix price, direct and indirect characteristics, and cost changes.

The research provides two measures, ISB (Improvement Saving Benefits) and IEB (Improvement Earning Benefits), to assess equipment performance improvements. The effectiveness of the metrics is validated through a three stages approach, namely (1) experts' binary opinion, (2) sample, and (3) actual cases. The relevant data may be collected through accounting systems, purpose-built software, or electronic spreadsheets.

The findings suggest that both measures provide an effective cost–benefit analysis of equipment performance enhancement. The measure ISB indicates savings from performance increases when equipment capacity is greater than product demand. IEB is utilised when equipment capacity is less than product demand. Both measurements may replace the unitary cost variation, which is subject to manufacturing changes.

Manufacturing businesses may utilise the ISB and IEB metrics to conduct a systematic analysis of equipment performance and to appreciate the financial savings perspective in order to emphasise profitability in the short and long term.

The study introduces two novel financial equipment performance improvement indicators that distinguish the effects of manufacturing variations. Manufacturing variations cause cost advantages from operational improvements to be misrepresented. There is currently no approach for manufacturing organisations to calculate the financial advantages of enhancing equipment performance while isolating production irregularities.

Shape memory materials are functional materials having a good number of applications due to their unique features of programmable material technology such as self-stretching, self-assembly and self-tightening. Advancements in today’s technology led to the easy fabrication of such novel materials using 3D printing techniques. When an external stimulus causes a 3D printed specimen to change shape on its own, this process is known as 4D printing. This study aims to investigate the effect of graphene nano platelet (GNPs) on the shape memory behaviour of shape memory photo polymer composites (SMPPCs) and to optimize the shape-changing response by using the Taguchi method.

SMPPCs are synthesized by blending different weight fractions (Wt.%) of flexible or soft photopolymer (FPP) resin with hard photopolymer (HPP) resin, then reinforced with GNPs at various Wt.% to the blended PP resin, and then fabricated using masked stereolithography (MSLA) apparatus. The shape memory test is conducted to assess the shape recovery time (T), shape fixity ratio (R_f), shape recovery ratio (R_r) and shape recovery rate (V_r) using Taguchi analysis by constructing an L9 orthogonal array with parameters such as Wt.% of a blend of FPP and HPP resin, Wt.% of GNPs and holding time.

SMPPCs with A3, B3 and C2 result in a faster T with 2 s, whereas SMPPCs with A1, B1 and C3 result in a longer T with 21 s. The factors A and B are ranked as the most significant in the Pareto charts that were obtained, whereas C is not significant. It can be seen from the heatmap plot that when factors A and B increase, T is decreasing and V_r is increasing. The optimum parameters for T and V_r are A3, B3 and C2 at the same time for R_f and R_r are A1, B3 and C1.

Faster shape recovery results from a higher Wt.% of FPP resin in a blend than over a true HPP resin. This is because the flexible polymer links in FPP resin activate more quickly over time. However, a minimum amount of HPP resin also needs to be maintained because it plays a role in producing higher R_f and V_r. The use of GNPs as reinforcement accelerates the T because nanographene conducts heat more quickly, releasing the temporary shape of the specimen more quickly.

The use of FPP and HPP resin blends, fabricating the 4D-printed SMPPCs specimens with MSLA technology, investigating the effect of GNPs and optimizing the process parameters using Taguchi and the work was validated using confirmation tests and regression analysis, which increases the originality and novelty.

This paper aims to present a hierarchical multiscale model to evaluate the effect of fused deposition modeling (FDM) process parameters on mechanical properties. Asymptotic homogenization mathematical theory is developed into two scales (micro and macro scales) to compute the effective elastic and shear modulus of the printed parts. Four parameters, namely, raster orientation, layer height, build orientation and porosity are studied.

The representative volume elements (RVEs) are generated by mimicking the microstructure of the printed parts. The RVEs subjected to periodic boundary conditions were solved using finite element. The experimental characterization according to ASTM D638 was conducted to validate the computational modeling results.

The computational model reports reduction (E1, ∼>38%) and (G12, ∼>50%) when porosity increased. The elastic modulus increases (1.31%–47.68%) increasing the orthotropic behavior in parts. Quasi-solids parts (100% infill) possess 10.71% voids. A reduction of 11.5% and 16.5% in elastic modulus with layer height is reported. In total, 45–450 oriented parts were highly orthotropic, and 0–00 parts were strongest. The order of parameters affecting the mechanical properties is porosity > layer height > raster orientation > build orientation.

This study adds value to the state-of-the-art terms of construction of RVEs using slicing software, discarding the necessity of image processing and study of porosity in FDM parts, reporting that the infill density is not the only measure of porosity in these parts.

This study aims to analyze the alignment between sustainable performance and sustainability planning in higher education, proposing a strategic map that integrates planning with the implementation of performance actions and sustainable performance on campuses.

The literature review development addresses sustainability in higher education institutions (HEIs). Data collection took place in two ways, documentary, through the analysis of documents and through an open interview, guided by a script with 13 questions. For data interpretation, the content analysis technique was applied.

To achieve the objective of this work, this study proposed a sustainable performance strategic map for better management of the university’s green strategies, based on three dimensions: internal processes, educational and sustainable performance.

This study’s main contribution was to propose a sustainable performance strategic map as a strategic management system aimed at HEIs to accelerate the promotion of sustainability in these organizations.

The present work investigated the effect of corporate social responsibility and top management support on employee ecological behaviour (EEB) with the mediating role of green culture and green commitment. Social identity theory (SIT) was used to describe the association between green culture, green commitment and EEB. Further, a conceptual model that summarises the interaction between perceived corporate social responsibility, top management support, green commitment, green culture and the adoption of ecological behaviour was developed.

The paper opted for a quantitative design using convenience sampling by collecting the data through a structured questionnaire gathered from 308 academics working in five Malaysian higher education institutions.

Corporate social responsibility and top management support positively influence green culture and commitment. Moreover, green commitment positively influenced EEB and fully mediated the relationship between corporate social responsibility and EEB and between top management support and EEB.

The academic staff of universities was the target population of this research. Nevertheless, universities have a diverse population with complex activities that can affect the implementation of a sustainable workplace within the campus. Future research should also examine non-academic staff, including administrative, technical and operational staff, due to different employees' perceptions.

As far as the authors know, this is the first study to assign the mediator role to green culture in a relationship between top management support and EEB amongst academic staff in the Malaysian context. Future research should consider other intervening variables that influence adopting ecological behaviour.

This study aims to identify a sustainable university’s key features. It is an essential step in tracing the topics discussed in the context of a sustainable university and their evolution in the scientific discourse.

This paper relies on a systematic literature review (SLR) conducted using two scholarly databases: Emerald and Scopus. The timeframe selected by the authors for reviewing the available sources spans from 2001 to 2021.

The analysis distinguished seven sustainable university categories, each revealing critical features of sustainable higher education. Each of these categories represents an intriguing area for in-depth analysis. The SLR reveals gaps requiring further scientific exploration.

The performed literature review was determined by the choice of entries (keywords) to identify the scientific papers in the selected databases. Moreover, as the authors aimed to focus on peer-reviewed sources, this SLR did not include books and doctoral dissertations dealing with the studied issues.

The results of the analysis can be used practically by both researchers and practitioners in the field of sustainable development (SD). Identified scientific gaps become a potential research field, and practitioners interested in the transition toward SD may contribute by accompanying universities in this journey. Collaboration and networking with business stakeholders are critical vectors for spreading the idea of SD.

Society’s growing concern for climate change requires accurate and specific actions from institutions. As entities educating future generations, universities have a unique role in transforming toward SD. The findings allow us to get acquainted with the existing main activities undertaken by higher education institutions in this field and understand the importance of this topic for researchers.

SLR is a cornerstone of research synthesis and helps integrate scientific evidence from qualitative and quantitative published studies. Conducted research presents knowledge about university sustainability and can help scientists find research gaps.

Using the social constructivist perspective of learning, this study aims to examine the patterns and the key areas of entrepreneurial learning based on a case study of 16 participants who were the incubatees of two technology-based business incubators in China. The key research question is: how do novice entrepreneurs, focusing on technology-based business incubators, learn from a social constructivist perspective?

The researchers applied a qualitative methodology in this study as they wanted to understand better the complexity of the learning process that is hard to achieve quantitatively. The qualitative data was collected through in-depth interviews with the incubatees, who were the managers and owners of their businesses. The interviews with the entrepreneurs were mainly focused on the learning patterns and the factors influencing learning through the use of the critical incident technique.

This will allow incubator managers to better evaluate the extent of effective entrepreneurial learning within the incubator's eco-system. The results show that the participants learn through socially constructivist systems that are structured around the support provided by the incubators. Learning in this context takes place in an extended spectrum, and participants are more interested in learning from networking with experienced entrepreneurs rather than from other incubatees or formal courses. Findings of this study help incubator managers and novice entrepreneurs to better shape learning and teamwork in an effort to improve the learning process. Policy makers should consider introducing schemes that encourage novice entrepreneurs to exhibit the creativity and innovation behaviour reported by experienced entrepreneurs.

The focus of this study is primarily on incubators as the context of learning, whereas the macro-environmental factors, such as the socio-cultural and regulatory environments in China, were considered as playing a subtle role and would affect the incubatees' learning indirectly. The paper is based on a relatively small sample size and is geographically located in Ningbo, China. As such, the authors call for further research for comparative studies with a larger sample size so that a possible theory of entrepreneurial learning in the context of incubators might emerge in the future.

This study aims to analyze the wettability of the self-developed Sn–Bi–Zn solder and to conduct a series of analysis on the wetting kinetics, diffusion phenomenon and interfacial reaction of Sn–Bi–Zn solder on Cu substrate.

The wetting kinetics, diffusion phenomenon and interfacial reaction of Sn–Bi–Zn solder on Cu substrate were analyzed by experiments. The interface was observed by scanning electron microscope to study the effect of Zn content on its interface.

With the increase in brazing temperature, the final spreading equivalent radius of the solder increases significantly, and the final contact angle of the solder decreases significantly. In addition, when the Zn content is 1%, the spreading effect of solder is the best, the equivalent radius is the largest and the contact angle is the smallest. According to the microstructural analysis, the thick intermetallic compounds layer of the Sn–15Bi–xZn solders on the Cu substrate can be effectively decreased by adding appropriate Zn content.

The wetting kinetics, diffusion phenomenon and interfacial reaction of Sn–15Bi–xZn solder on Cu substrate at different temperatures have not been studied yet.