Search results
1 – 10 of 282Marcel Papert, Patrick Rimpler and Alexander Pflaum
This work analyzes a pharmaceutical supply chain (PSC) in terms of supply chain visibility (SCV). The current good distribution practice (GDP) guideline demands increased…
Abstract
Purpose
This work analyzes a pharmaceutical supply chain (PSC) in terms of supply chain visibility (SCV). The current good distribution practice (GDP) guideline demands increased visibility from firms. The purpose of this paper is to propose a solution for SCV enhancements based on automatic identification (Auto-ID) technologies.
Design/methodology/approach
The authors qualitatively analyze data from ten case studies of actors in a PSC. A review of Auto-ID technologies supports the derivation of solutions to enhance SCV.
Findings
This work shows that the functionalities of Auto-ID technologies offered by current practical monitoring solutions and challenges created by the GDP guideline necessitate further SCV enhancements. To enhance SCV, the authors propose three solutions: securPharm with passive radio frequency identification tags, transport containers with sensor nodes, and an SCV dashboard.
Research limitations/implications
This study is limited to a PSC in Germany and is therefore not intended to be exhaustive. Thus, the results serve as a foundation for further analyses.
Practical implications
This study provides an overview of the functionality of Auto-ID technologies. In juxtaposition with the influence of the GDP guideline, the use of our Auto-ID-based solutions can help to enhance SCV.
Originality/value
This work analyzes a PSC in Germany, with consideration given to the influence of current legislation. Based on a multiple-case-study design, the authors derive three Auto-ID-based solutions for enhancing SCV.
Details
Keywords
A. Soylemezoglu, M. J. Zawodniok, K. Cha, D. Hall, J. Birt, C. Saygin and J. Sarangapani
This paper presents an overview on the Auto‐ID (Automatic Identification) technologies testbed that has been established at the University of Missouri‐Rolla (UMR) with the…
Abstract
Purpose
This paper presents an overview on the Auto‐ID (Automatic Identification) technologies testbed that has been established at the University of Missouri‐Rolla (UMR) with the objective of supporting research, development, and implementation of Auto‐ID technologies in network‐centric manufacturing environments.
Design/methodology/approach
UMR's Auto‐ID testbed uses a unique hardware‐in‐the‐loop simulation methodology, which integrates decision‐making model development with the design of networking topology and data routing/scheduling schemes, in order to develop, test, and implement viable Auto‐ID solutions. The methodology is founded on a 3‐level integrated model: controller simulation, distributed controller simulation, and distributed controller simulation with hardware‐in‐the‐loop.
Findings
This paper discusses two case studies that highlight the effective use of RFID technology, its potential advantages, challenges, and deficiencies stemming from particular applications. These applications include dock doors, automated guided vehicles, conveyor and automated storage/retrieval systems, integration of RFID middleware with programmable logic controllers, and inventory management of time‐sensitive materials.
Originality/value
The paper presents an innovative idea: hardware‐in‐the‐loop simulation methodology to design automation systems. The approach has been implemented on a variety of applications, which are presented in the paper as case studies.
Details
Keywords
Ola Johansson and Henrik Pålsson
The purpose of this paper is to examine how logistics performance is affected by the use of different identification technologies and practices for utilising the tracking data.
Abstract
Purpose
The purpose of this paper is to examine how logistics performance is affected by the use of different identification technologies and practices for utilising the tracking data.
Design/methodology/approach
The paper uses the survey method. The survey instrument is developed in co‐operation with an expert group consisting of both researchers and industry representatives. The data are analysed using multivariate techniques and hypothesis testing.
Findings
This paper indicates better logistics performance for companies using radio frequency identification (RFID) technology, while no significant differences can be seen for companies using Auto‐ID in general. In terms of registration, best‐in‐class firms have more identification points along their supply chains compared to other firms. Best‐in‐class firms also seem to have more extensive sharing of tracking data with supply chain partners, both upstream and downstream, and in terms of frequency and scope, which contributes to superior logistical performance.
Research limitations/implications
To provide a more robust scientific justification of the survey results, in‐depth case studies should be carried out. Further studies are needed to verify the links between RFID and logistics performance.
Practical implications
The findings may enable managers to estimate the potential of using identification technologies and learn of practices which may enable their organisations to improve logistics performance.
Originality/value
This paper presents empirical links between different identification technologies, attributes of the tracking system, use and sharing of tracking data and logistical improvements.
Details
Keywords
Hyo Won Han, Yoon Seok Chang and Myung Ryul Choi
The purpose of this paper is to present a new way of manufacturing process in the plant of the leading weedicide manufacturing company in Korea, Dongbu.
Abstract
Purpose
The purpose of this paper is to present a new way of manufacturing process in the plant of the leading weedicide manufacturing company in Korea, Dongbu.
Design/methodology/approach
This paper explains a design of Auto‐ID based weedicide manufacturing process, introduces new mechanism for assembly machine and presents simulation approach to understand potential benefit.
Findings
In Dongbu, there was no information matching among bottle, box and pallet levels. Another issue was error propagation. Because, the allowance range for weight difference is different depending on the level of unit, the small weight difference (i.e. deviation) within allowance range in bottle level can create errors when accumulated for boxing. The proposed method improved performance measures such as cycle time and cost of raw materials by introducing Auto‐ID technology. As in the simulation results, it is considered that adoption of radio frequency identification together with this automatic module will improve manufacturing performance drastically.
Originality/value
The research was based on the real world implementation of Auto‐ID based manufacturing in weedicide manufacturing company and discussed a new approach which addresses the current issues of industry.
Details
Keywords
Edward Finch and Laurence Marsh
Discusses the implications of auto‐ID technology advances in the area of facilities management. Advocates the use of auto‐ID for the development of “building intelligence”…
Abstract
Discusses the implications of auto‐ID technology advances in the area of facilities management. Advocates the use of auto‐ID for the development of “building intelligence”, whereby information can be obtained locally without reliance on a networked information system. Barcoding, often thought of as a rather static technology, is in fact undergoing quite radical changes which enable the codes to store massive amounts of information. This low cost information storage system is one of a number of auto‐ID solutions which require further development, particularly in the area of standards, if information is to be genuinely exchangeable between manufacturers, contractors and building owners. Describes some of the work currently being undertaken at the University of Reading concerned with the introduction of auto‐ID standards in construction and facilities management.
Details
Keywords
Duncan McFarlane and Yossi Sheffi
Automated Identification (Auto ID) applications can provide corporate information systems with the identity of each physical item in the supply chain in an automated and timely…
Abstract
Automated Identification (Auto ID) applications can provide corporate information systems with the identity of each physical item in the supply chain in an automated and timely manner. The real time availability of item identity allows other information, related to the item, to be drawn on in order to assess both the current state of the product and future actions required. In the context of supply chain operations, widespread introduction of such systems represents a major opportunity to overhaul and improve tracking and tracing systems, process control and inventory management. In the longer term, it is possible that Auto ID systems may enable a complete re‐engineering of the supply chain, by removing a number of the constraints that limit today's supply chain structures. In this paper, we review some key challenges in supply chain operations and introduce the main elements of an Auto ID system. Using a simple categorization of supply chain operations, areas for short term deployment of Auto ID are identified and opportunities for longer term re‐engineering of different sections of the supply chain are highlighted.
Details
Keywords
Abstract
Jinying Xu, Ke Chen, Anna Elizabeth Zetkulic, Fan Xue, Weisheng Lu and Yuhan Niu
The practice of facility management (FM) has been evolving with the rapid development of pervasive sensing technologies (PSTs) such as sensors, automatic identification (auto-ID)…
Abstract
Purpose
The practice of facility management (FM) has been evolving with the rapid development of pervasive sensing technologies (PSTs) such as sensors, automatic identification (auto-ID), laser scanning and photogrammetry. Despite the proliferation of research on the use of PSTs for FM, a comprehensive review of such research is missing from the literature. This study aims to cover the knowledge void by examining the status quo and challenges of the selected PSTs with a focus on FM.
Design/methodology/approach
This paper reviewed 204 journal papers recounting cases of using PSTs for FM. The reviewed papers were extracted from Elsevier Scopus database using the advanced search.
Findings
Findings of this study revealed that PSTs and FM applications form a many-to-many mapping, i.e. one PST could facilitate many FM applications, and one application can also be supported by various PSTs. It is also found that energy modeling and management is the most referred purpose in FM to adopt PSTs, while space management, albeit important, received the least attention. Five challenges are identified, which include high investment on PSTs, data storage problem, absence of proper data exchange protocols for data interoperability, a lack of mature data processing methods for data utilization and privacy of users.
Originality/value
This paper paints a full picture of PSTs adoption for FM. It pinpoints the promising explorations for tackling the key challenges to future development.
Details
Keywords
Frederic Thiesse and Florian Michahelles
This paper aims to provide an overview of the electronic product code (EPC) and related RFID standards that are currently being rolled out in the retail industry.
Abstract
Purpose
This paper aims to provide an overview of the electronic product code (EPC) and related RFID standards that are currently being rolled out in the retail industry.
Design/methodology/approach
It considers the EPC numbering schemes, air interface protocols, middleware aspects as well as scenarios for practical use.
Findings
Identifies possibilities and limitations of EPC standards, the current status of technology adoption and future fields of application.
Originality/value
Of interest to those concerned with RFID technology selection and infrastructure development.
Details
Keywords
JingHuey Khor, Widad Ismail, Mohd Nasir Md Rashid, A. Akla Wan Ismail, Muhammad Qayum Omar and Farah Hazwani Mohd Zanal
Universiti Sains Malaysia (USM) uses different detection technologies and integrated library systems (ILS) at its four libraries located at different sites. Hence, ubiquitous data…
Abstract
Purpose
Universiti Sains Malaysia (USM) uses different detection technologies and integrated library systems (ILS) at its four libraries located at different sites. Hence, ubiquitous data management system is required in the four libraries to enable real-time data sharing and tracking among the libraries. The paper aims to discuss these issues.
Design/methodology/approach
Proof of concept is used to verify the performance of integration between different detection technologies including barcode, high frequency (HF) and ultra high frequency (UHF) radio frequency identification (RFID) as well as Integrated Library Management Utility (ILMU) and Koha ILSs. Five pilot tests are performed to investigate the speed of the borrowing and returning transactions, the efficiency of security gate to detect non-borrowed items, and the reliability of the ubiquitous data management system.
Findings
The HF RFID technology and the proprietary library system have been used in many libraries. The current study proves that the integration of the UHF RFID technology and the Koha open-source ILS, which is named as Total Open-Source Library Automation Solution, can be a novel solution and can serve as a guide for other libraries.
Originality/value
In the current phase of library data management system, it is common to integrate various technologies in improving the efficiency of the library system. But, the combination of Koha with UHF RFID into a single ILS for intra-library automation system has not been proven. This shows the importance of the proposed proven proof of concept that proves such integration is suitable to be implemented at USM libraries and other libraries.
Details