Search results

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

Implementation details of the assumed shear strain method in a novel finite rotation shell theory are discussed. Careful considerations of the pertinent aspects of the Newton solution procedure are given. The latter results in a very robust performance of the presented 4–node shell element in some challenging finite rotation problems.

A nonlinear finite element (FE) beam-column model for the analysis of reinforced concrete (RC) frames with due account of shear is presented in this paper. The model is an expansion of the traditional flexural fibre beam formulations to cases where multiaxial behaviour exists, being an alternative to plane and solid FE models for the nonlinear analysis of entire frame structures. The paper aims to discuss these issues.

Shear is taken into account at different levels of the numerical model: at the material level RC is simulated through a smeared cracked approach with rotating cracks; at the fibre level, an iterative procedure guarantees equilibrium between concrete and transversal reinforcement, allowing to compute the biaxial stress-strain state of each fibre; at the section level, a uniform shear stress pattern is assumed in order to estimate the internal shear stress-strain distribution; and at the element level, the Timoshenko beam theory takes into account an average rotation due to shear.

The proposed model is validated through experimental tests available in the literature, as well as through an experimental campaign carried out by the authors. The results on the response of RC elements critical to shear include displacements, strains and crack patterns and show the capabilities of the model to efficiently deal with shear effects in beam elements.

A formulation for the nonlinear shear-bending interaction based on the fixed stress approach is implemented in a fibre beam model. Shear effects are accurately accounted during all the nonlinear path of the structure in a computationally efficient manner.

The 4‐node assumed strain elements are among the best elements available today but the bending moments at their full integration points oscillate severely. This paper presents a one point integrated version of the 4‐node assumed strain plate element of Bathe‐Dvorkin. A Taylor series expansion approach is used to accommodate the linear variation of strains/stresses within the element and hence to stabilize the spurious zero energy modes. An extensive number of benchmark results are presented and compared.

This paper aims to propose a new robust membrane finite element for the analysis of plane problems. The suggested element has triangular geometry. Four nodes and 11 degrees of freedom (DOF) are considered for the element. Each of the three vertex nodes has three DOF, two displacements and one drilling. The fourth node that is located inside the element has only two translational DOF.

The suggested formulation is based on the assumed strain method and satisfies both compatibility and equilibrium conditions within each element. This establishment results in higher insensitivity to the mesh distortion. Enforcement of the equilibrium condition to the assumed strain field leads to considerably high accuracy of the developed formulation.

To show the merits of the suggested plane element, its different properties, including insensitivity to mesh distortion, particularly under transverse shear forces, immunities to the various locking phenomena and convergence of the element are studied. The obtained results demonstrate the superiority of the suggested element compared with many of the available robust membrane elements.

According to the attained results, the proposed element performs better than the well-known displacement-based elements such as linear strain triangular element, Q4 and Q8 and even is comparable with robust modified membrane elements.

A fully mixed hybrid 4‐node shell element for linear analyses is presented and compared to the current state‐of‐the‐art. The specific improvements developed concern the stress assumptions for the transverse shear stresses in the in‐plane directions, such that the element is applicable for arbitrary element geometries without shear locking and satisfies the patch test exactly. Furthermore, in analogy to the membrane and bending part the shear part of the stiffness matrix can be formulated as a one‐point integrated constant part with a rank‐two update representing the linear parts. However, this efficient formulation leads to additional approximations concerning the geometry of arbitrarily curved elements. The latter aspect is discussed with some numerical examples, which demonstrate the capabilities of the developed element.

An efficient implementation of a constitutive model for reinforced concrete plates is discussed in this work. The constitutive model is set directly in terms of stress resultants and their energy conjugate strain measures, relating their total values. The latter simplification is justified by our primary goal being an evaluation of the limit load of a reinforced concrete plate. A concept of the ‘rotating crack model’ is utilized in proposing the constitutive model to relate the principal values of bending moments and the corresponding values of curvatures. Efficient implementation is provided by a very robust, but inexpensive plate element. The element is based on an assumed shear strain field and a set of incompatible bending modes, which provides that the non‐linear computations, pertinent to constitutive model, can be carried out locally, i.e. independently at each numerical integration point. Set of numerical examples is presented to demonstrate a very satisfying performance of the proposed model.

A higher-order Reissner-Mindlin plate element method is presented based on the framework of assumed stress quasi-conforming method and Hellinger-Reissner variational principle. A novel six-node triangular plate element is proposed by utilizing this method for the static and free vibration analysis of Reissner-Mindlin plates.

First, the initial assumed stress field is derived by using the fundamental analytical solutions which satisfy all governing equations. Then the stress matrix is treated as the weighted function to weaken the strain-displacement equations after the strains are derived by using the constitutive equations. Finally, the arbitrary order Timoshenko beam function is adopted as the string-net functions along each side of the element for strain integration.

The proposed element can pass patch test and is free from shear locking and spurious zero energy modes. Numerical tests show that the element can give high-accurate solutions, good convergence and is a good competitor to other models.

This work gives new formulations to develop high-order Reissner-Mindlin plate element, and the new strategy exhibits advantages of both analytical and discrete methods.

A study of the behaviour of shear deformable plate finite elements is carried out to determine why and under what conditions these elements lock, or become overly stiff. A new analytical technique is developed to derive the exact form of the shear constraints which are imposed on an element when its side‐to‐thickness ratio is large. The constraints are expressed in terms of the nodal degrees of freedom, and are interpreted as being either the proper Kirchhoff constraints or spurious locking constraints. To gain a better understanding of locking phenomena, the constraints which arise under full and reduced integration are derived for various plate elements. These include bilinear, biquadratic, eight‐node serendipity and heterosis elements. These analytical findings are compared with numerical results of isotropic and laminated composite plates, verifying the role that shear constraints play in determining the behaviour of thin shear deformable elements. The results of the present study lead to definitive conclusions regarding the origin of locking phenomena and the effect of reduced integration.

The purpose of this study is to evaluate the effectiveness of two-dimensional (2D) cyclic softened membrane model (CSMM)-based non-linear finite element (NLFE) model in predicting the complete non-linear response of shear critical bridge piers (with walls having aspect ratios greater than 2.5) under combined axial and reversed cyclic uniaxial bending loads. The effectiveness of the 2D CSMM-based NLFE model has been compared with the widely used one-dimensional (1D) fiber-based NLFE models.

Three reinforced concrete (RC) hollow rectangular bridge piers tested under reversed cyclic uniaxial bending and sustained axial loads at the National Centre for Research on Earthquake Engineering (NCREE) Taiwan have been simulated using both 1D and 2D models in the present study. The non-linear behavior of the bridge piers has been studied through various parameters such as hysteretic loops, energy dissipation, residual drift, yield load and corresponding drift, peak load and corresponding drift, ultimate loads, ductility, specimen stiffness and critical strains in concrete and steel. The results obtained from CSMM-based NLFE model have been critically compared with the test results and results obtained from the 1D fiber-based NLFE models.

It has been observed from the analysis results that both 1D and 2D simulation models performed well in predicting the response of flexure critical bridge pier. However, in the case of shear critical bridge piers, predictions from 2D CSMM-based NLFE simulation model are more accurate. It has, thus, been concluded that CSMM-based NLFE model is more accurate and robust to simulate the complete non-linear behavior of shear critical RC hollow rectangular bridge piers.

In this study, a novel attempt has been made to provide a rational and robust FE model for analyzing shear critical hollow RC bridge piers (with walls having aspect ratios greater than 2.5).