Search results

Goat milk yoghurt differs from cow milk yoghurt in that it has a different casein composition and content, which presents several technical challenges, including consistency with an appropriate flavor.

In this study, the antioxidant potential and phytochemical profiling of the fruits (pineapple and papaya) and vegetable (carrot) extracts was evaluated and the effect of their purees on the quality and stability of stirred goat milk yoghurt (GMY) were investigated. The qualities of stirred GMY with carrot (CrY), pineapple (PaY) and papaya (PpY) purees were assessed against the product without puree (CY).

The carrot puree had the highest moisture, ash contents and pH value. The carrot extract had the highest DPPH radical scavenging activity, while the pineapple extract had the highest total phenolic value (1.59 µg GAE/g) and flavonoids content (0.203 µg CE/g). The scanning of all the puree extracts in GC-MS indicated that 5-hydroxymethylfurfural was a major component. The phytochemical quantification of the extracts through multiple reaction monitoring (MRM) against 16 compounds showed the presence of sinapic acid, cinnamic acid, pthalic acid, ferulic acid, 4-OH-benzoic acid, 3-OH-benzoic acid, p-coumaric acid, caffeic acid and vanillic acid in different quantities. The addition of purees and storage period had a significant (p < 0.05) effect on the moisture, pH, titratable acidity, syneresis, viscosity, color values and sensory properties of the products. In all the samples after 15 days of storage, Streptococcus thermophilus and Lactobacillus bulgaricus counts remained above the recommended level of 106CFU/g. Stirred GMY sample produced with pineapple puree showed a higher syneresis and viscosity, but the CrY sample demonstrated the highest antioxidant activity. The developed formulations remained stable with minimum changes in quality and sensory attribute during refrigerated storage for 10 days.

This study suggests that addition of fruit and vegetable improve the viscosity and sensory perception of the product with minimal use of synthetic flavor and preservatives.

The aim of this paper is to study the effect of laser shock peening (LSP) on mechanical behaviour of the laser-directed energy deposition (LDED)-based printed 15-5 PH stainless steel with U and V notches. The study specifically concentrates on the evaluation of effect of scan strategy, machining and LSP processing on microstructural, texture evolution and fatigue behaviour of LDED-printed 15-5 PH steel.

For LSP treatment, 15-5 PH steel was printed using LDED process with bidirectional scanning strategy (XX [θ = 0°) and XY [θ = 90°]) at optimised laser power of 600 W with a scanning speed of 300 mm/min and a powder feed rate of 3 g/min. Furthermore, LSP treatment was conducted on the V- and U-notched fatigue specimens extracted from LDED-built samples at laser energy of 3.5 J with a pulse width of 10 ns using laser spot diameter of 3 mm. Post to the LSP treatment, the surface roughness, fatigue life assessment and microstructural evolution analysis is performed. For this, different advanced characterisation techniques are used, such as scanning electron microscopy attached with electron backscatter diffraction for microstructure and texture, X-ray diffraction for residual stress (RS) and structure information, Vicker’s hardness tester for microhardness and universal testing machine for low-cycle fatigue.

It is observed that both scanning strategies during the LDED printing of 15-5 PH steel and laser peening have played significant role in fatigue life. Specimens with the XY printing strategy shows higher fatigue life as compared to XX with both U- and V-notched conditions. Furthermore, machining and LSP treatment led to a significant improvement of fatigue life for both scanning strategies with U and V notches. The extent of increase in fatigue life for both XX and XY scanning strategy with V notch is found to be higher than U notch after LSP treatment, though without LSP samples with U notch have a higher fatigue life. As fabricated sample is found to have the lowest fatigue life as compared to machines and laser peened with both scan strategies.

This study presents an innovative method to improve the fatigue life of 15-5 PH stainless steel by changing the microstructure, texture and RS with the adoption of a suitable scanning strategy, machining and LSP treatment as post-processing. The combination of preferred microstructure and compressive RS in LDED-printed 15-5 PH stainless steel achieved with a synergy between microstructure and RS, which is responsible to improve the fatigue life. This can be adopted for the futuristic application of LDED-printed 15-5 PH stainless steel for different applications in aerospace and other industries.

Interconnections among banks are an essential feature of the banking system as it helps in an effective payment system and liquidity management. However, it can be a nightmare during a crisis when these interconnections can act as contagion channels. Therefore, it becomes essentially important to identify good links (non-contagious channels) and bad links (contagious channels).

The article estimated systemic risk using quantile regression through the ΔCoVaR approach. The interconnected phenomenon among banks has been analyzed through Granger causality, and the systemic network properties are evaluated. The authors have developed a fixed effect panel regression model to predict interconnectedness. Profitability-adjusted systemic index is framed to identify good (non-contagious) or bad (contagious) channels. The authors further developed a logit model to find the probability of a link being non-contagious. The study sample includes 36 listed Indian banks for the period 2012 to 2018.

The study indicated interconnections increased drastically during the Indian non-performing asset crisis. The study highlighted that contagion channels are higher than non-contagious channels for the studied periods. Interbank bad distance dominates good distance, highlighting the systemic importance of banking network. It is also found that network characteristics can act as an indicator of a crisis.

The study is the first to differentiate the systemic contagious and non-contagious channels in the interbank network. The uniqueness also lies in developing the normalized systemic index, where systemic risk is adjusted to profitability.

The present study examines the significance of financial inclusion in reducing income inequality in the Asian context.

This study uses panel estimation techniques such as the Pedroni cointegration test, Kao residual-based test, FMOLS, ARDL and Granger causality, a dataset consisting of the Gini coefficient index, three dimensions of financial inclusion measures and one added variable on financial depth, spanning from 2005 to 2019.

The study finds that in the long-run, income inequality disparity is highly influenced by financial inclusion indicators, such as the number of bank branches, deposit accounts, outstanding loans and domestic credit to the private sector. Whereas in the short run, disparities in income are unaffected by all the indicators of financial inclusion. Further, unidirectional causality from financial inclusion indicators to income inequality necessitates the need for policymakers to design policies and programs that would enhance access to financial services as an essential mechanism to reduce income disparity.

Studies based on a panel of Asian countries that have undergone impressive growth of financial inclusion initiatives since the past decade—but are still facing widening income inequality—are conspicuously rare in the literature. The empirical analysis fills this void by showing the significant role financial inclusion indicators play in steering the Asian economies toward income equality throughout the study period.

The main purpose of this paper is to examine the role of population aging in determining the health care expenditure (HCE) in India over the period 1981 to 2018.

While establishing the linkage between population aging and HCE, the study has used economic growth, urbanization and CO2 emissions as control variables and used the autoregressive distributed lag (ARDL) approach to cointegration and VECM based Granger causality approach to estimate both the long-run and short-run relationships among the variables.

The results of the ARDL bounds test showed that there is a stable and long-run relationship among the variables. The long-run and short-run coefficients reveal that population aging and income per capita exert a statistically significant and positive effect on per capita HCE in India. The VECM causality evidence shows that there is a presence of short-run causality from economic growth and population aging to per capita HCE, urbanization to environmental degradation and further from aging to urbanization. However, the long-run causality evidence confirms unidirectional causality from population aging to the per capita HCE.

The research findings could be improved by considering the changes in mortality rate over time because of other environmental factors such as air pollution, among others as control variables. Various other variables affecting the health of an aged person could be considered for better research outcome which is not included in the present study because of the paucity of data. However, the present research findings would certainly serve effective policy instrument aiming at maximizing health gains that are highly associated with the elderly population and economic growth towards achieving sustainable development in India.

The uniqueness of the present study lies in its estimation where the relationship between population aging and HCE is looked at while considering the impact of other environmental factors separately. The causal relationship is shown among the variables using updated econometrics time-series techniques. The study tried to resolve the ambiguity associated with the relationship between aging and HCE at a macro level.

This study aims to understand the impact of negative supervisor gossip on job performance among South Indian hotel employees. The focus is not just on the direct influence, but also on the mediating role of feedback-seeking behaviour (FSB) and the moderating effects of the agreeableness trait.

Through purposive sampling, data was garnered from South Indian hotel employees. Comprehensive analyses were performed using partial least squares structural equation modelling.

The analysis shows that FSB plays a mediating role in the positive relationship between negative supervisor gossip and job performance. In addition, the influence of gossip on FSB and subsequent job performance was more pronounced for employees with high agreeableness.

This research underscores the complex interplay between negative supervisor gossip and job performance, revealing that such gossip can catalyze FSB process in employees. It suggests that under certain conditions, negative gossip can be transformed into a constructive force that enhances job performance, challenging traditional perceptions of gossip in the workplace.

The findings underscore the importance of understanding the effects of workplace dynamics, like supervisor gossip, on employee behaviour and performance. Recognizing the influence of individual personality traits, such as agreeableness, can guide management strategies for fostering a productive work environment.

This research sheds light on the intricate interplay between negative supervisor gossip, FSB and agreeableness, offering a novel perspective on their combined impact on job performance. It not only enriches the existing literature on workplace communication but also broadens the understanding of the role of personality traits in shaping employee responses and outcomes.

This study aims to examine the role of Bilateral Investment Treaties (BITs) in attracting higher foreign direct investment (FDI) inflows into the major emerging economies namely Brazil, Russia, India, China and South Africa (BRICS) from the source developed, developing and other emerging economies over a period of 18 years from 2001 to 2018.

To estimate the results, panel data regression on a gravity-knowledge capital model has been used. To account for the problem of endogeneity we have used the two-step difference Generalised Method of Moments estimator proposed by Arellano and Bond (1991).

We find that contradictory to theory and expectations, BITs result in a fall in FDI inflows in BRICS economies. BITs ratified by BRICS economies are not able to provide a sound and secure investment environment to foreign investors, thereby discouraging FDI in these economies.

To the best of the authors’ knowledge, this study is the first to examine the impact of BITs on FDI inflows into the emerging BRICS economies. Further, the impact of BITs on FDI flows among developed nations, i.e. north-north FDI and from developed to developing countries, i.e. north-south FDI has already been studied by many researchers. But so far, no study has examined this impact on FDI among developing and emerging economies (south-south FDI), despite an increase in FDI flows among these economies. Therefore, this study seeks to overcome the limitations of previous studies and tries to find out the impact of BITs on FDI inflows in BRICS economies not only from source developed but also from source developing and other emerging economies.

The study proposes to empirically test a model that illustrates how identical elements (IEs), transfer design and trainer performance as training predictors affect trainees' motivation to improve work through learning (MTIWL) and training transfer (TT) in the Indian context.

An online survey was conducted to validate the study model. The quantitative data collected from 360 executives and managers were analyzed using the covariance-based structural equation modeling (CB-SEM) technique.

The study finds that trainees' MTIWL has a full mediation impact between transfer design, trainer performance and TT. However, a partial mediating impact of MTIWL was found between IEs and TT.

This is the first study that empirically explores the mediating mechanism of MTIWL between IEs, transfer design, trainer performance and TT. This study extends the current understanding of trainees' MTIWL that links the cumulative influence of training predictors to TT.

This study attempts to recognize obstacles and barriers to financial inclusion in the agriculture sector, propose a framework based on the inter-contextual link between the barriers and understand the financial exclusion in the agriculture sector at the grassroots level. Previously published research articles were used to identify the barriers to financial inclusion, followed by informal interviews and collaborative discussions with the local farmers of the Sonipat district of Haryana and expert interviews using a structured questionnaire. TISM and MICMAC analysis are used to decern the nature of the relationship among the barriers discovered. The authors find that inadequate financial literacy, a shortage of financial awareness and the reluctance of various financial institutions are significant linkage barriers to strong driving and dependence power. High transaction costs and poor infrastructural support are the independent barriers. The paper identifies these new barriers to financial inclusion in the Indian agriculture sector and the framework depicting financial exclusion in India. This paper only gives a framework of barriers and does not quantify the effect of any relationship identified, but strongly emphasizes granting the Indian agriculture sector broad and simple financial access to advance and strengthen the nation's sustainable, inclusive economic growth.

This study aims to study the interaction effects between a rectangular supersonic jet with a flat wall computationally using wall length as a parameter. The purpose of this study is to investigate the effect of change in wall length on supersonic core length (SCL) reduction, jet deflection and jet decay behavior.

The design Mach number and aspect ratio at the rectangular exit were 1.8 and 2, respectively. To study the wall length effects on jet-wall interactions, wall length (L_w) was varied as 0.5D_h, 1D_h, 2D_h, 4D_h and 8D_h, where D_h was the hydraulic diameter of the nozzle exit. The flat wall with the matching width of the rectangular exit section of a supersonic nozzle was placed at the nozzle exit such that the supersonic jet grazed past the wall. The studies were carried out at over-expansion [nozzle pressure ratio (NPR) = 4], near optimum expansion (NPR = 6) and under-expansion (NPR = 8) levels.

Results indicated that significant reduction in wall-bounded SCL was noticed in the range of 0.5D_h  ≤  L_w ≤ 1D_h for both over-expansion and under-expansion conditions. At L_w ≥ 4D_h, SCL got enhanced at NPR = 4 and 6 but had a negligible effect at NPR = 8.

Thrust vector control, noise reduction and easy take-off for high-speed aircraft.

The effect of change in flat wall length on interaction characteristics of a rectangular supersonic jet was not studied before in terms of SCL reduction and jet decay behavior.