Search results

For additive manufacturing (AM) through laser-based powder bed fusion of polymers (PBF-LB/P), accurate characterization of powder flowability is vital for achieving high-quality parts. However, accurately characterizing feedstock flowability presents challenges because of a lack of consensus on which tests to perform and the diverse forces and mechanisms involved. This study aims to undertake a thorough investigation into the flowability of eight feedstock materials for PBF-LB/P at different temperatures using various techniques.

For ambient temperature assessments, established metrics such as avalanche angle and Hausner ratio, along with the approximated flow function coefficient (FFC_app), are used. The study then focuses on the influence of elevated temperatures representative of in-process conditions. FFC_app and differential scanning calorimetry (DSC) are performed and analyzed, followed by a correlation analysis as a holistic approach to identify key aspects for flowability. Furthermore, two feedstock materials are compared with a previous study to connect the present findings to PBF-LB/P processing.

The study revealed intrinsic material properties such as mechanical softening near the melting point to become significant. This partially explains why certain powders with poor ambient temperature flowability are consistently demonstrated to produce high-quality parts. FFC_app and thermal characterization through DSC are identified as critical metrics for optimizing feedstock material characteristics across temperature ranges.

Previous studies emphasized specific characterizations of feedstock material at ambient temperature, presented a limited materials selection or focused on metrics such as shape factors. In contrast, this study addresses a partially understood aspect by examining the critical role of temperature in governing feedstock material flowability. It advocates for the inclusion of temperature variables in flowability analyses to closely resemble the PBF-LB/P process, which can be applied to material design, selection and process optimization.

To investigate the mechanical properties of geopolymer concrete at elevated temperatures.

The investigation involved studying the influence of partially replacing fly ash with ground granulated blast furnace slag (GGBS) at different proportions (5%, 10%, 15%, 20% and 25%) on the composition of the geopolymer. This approach aimed to examine how the addition of GGBS impacts the properties of the geopolymer material. The chemical NaOH was purchased from the local supplier of Jamshedpur. The alkali solution was prepared with a concentration of 12 M NaOH to produce the concrete. After several trials, the alkaline-to-binder ratio was determined to be 0.43.

The compressive strength values at 28 days for specimens FG1, FG2, FG3, FG4 and FG5 are 35.42 MPa, 41.26 MPa, 44.79 MPa, 50.51 MPa and 46.33 MPa, respectively. The flexural strength values at 28 days for specimens FG1, FG2, FG3, FG4 and FG5 are 5.31 MPa, 5.64 MPa, 6.12 MPa, 7.15 MPa and 6.48 MPa, respectively. The split tensile strength values at 28 days for specimens FG1, FG2, FG3, FG4 and FG5 are 2.82 MPa, 2.95 MPa, 3.14 MPa, 3.52 MPa and 3.31 MPa, respectively.

This approach allows for the examination of how the addition of GGBS affects the properties of the geopolymer material. Four different temperature levels were chosen for analysis: 100 °C, 300 °C, 500 °C and 700 °C. By subjecting the geopolymer samples to these elevated temperatures, the study aimed to observe any changes in their mechanical.

Although separate studies on the influence of corrosion and fire exposure on the constitutive relationship of concrete and steel have been done, there is still a gap in knowledge on the influence of corrosion-temperature superimposition as nonlinear phenomenon. The current study is focused to investigate the response of hot-rolled steel bars subjected to corrosion-temperature superimposition.

Using the accelerated corrosion-impressed-current technique, hot-rolled specimens with different levels of corrosion were obtained. The hot-rolled rebars were first corroded to target levels such as (6, 12, 18, 24, 30 and 36%) and subsequently subjected to target temperatures (250 °C, 400 °C, 550 °C, 800 °C and 950 °C), before tensile tests were carried out to evaluate the residual mechanical response.

The outcomes showed a significant decline in the parameters governing the mechanical properties of steel reinforcement due to the combined damage due to corrosion and fire. Corroded reinforcement still showed ductile failure after exposure to fire. Moreover, the combined loss of load-bearing characteristics due to corrosion and fire has little influence on the modulus of elasticity. The outcomes of this investigation provide a theoretical database for the assessment of aged structural elements exposed to combination after exposure to fire.

The information concerning structural material's response to corrosion-temperature combined damage is still limited. The cover of the reinforcement is designed to safeguard the reinforcing bars from foreign agencies but is often damaged and spalled off due to corrosion, rendering the reinforcing bars directly exposed. The study aims at the experimental production of fire conditions in a corrosion-damaged infrastructure to cover the aforementioned research gap. The effects of corrosion being superimposed by exposure to elevated temperatures on key parameters affecting mechanical behavior were examined.

1. Influence of corrosion-temperature superimposition on the mechanical properties of hot-rolled rebars.

2. Influence of corrosion-temperature superimposition on the macro and microstructure properties of hot-rolled rebars.

3. Influence of corrosion-temperature superimposition on stress-strain curves of hot-rolled rebars.

4. Influence of corrosion-temperature superimposition on tensile strength, modulus of elasticity and elongation of hot-rolled rebars.

Influence of corrosion-temperature superimposition on the mechanical properties of hot-rolled rebars.

Influence of corrosion-temperature superimposition on the macro and microstructure properties of hot-rolled rebars.

Influence of corrosion-temperature superimposition on stress-strain curves of hot-rolled rebars.

Influence of corrosion-temperature superimposition on tensile strength, modulus of elasticity and elongation of hot-rolled rebars.

This paper aims to investigate the influence of composite solder joint preparation on the thermal properties of metal-oxide-semiconductor field-effect transistors (MOSFETs) and the mechanical strength of the soldered joint.

Reinforced composite solder joints with the addition of titanium oxide nanopowder (TiO₂) were prepared. The reference alloy was Sn99Ag0.3Cu0.7. Reinforced joints differed in the weight percentage of TiO₂, ranging from 0.125 to 1.0 Wt.%. Two types of components were used for the tests. The resistor in the 0805 package was used for mechanical strength tests, where the component was soldered to the FR4 substrate. For thermal parameters measurements, a power element MOSFET in a TO-263 package was used, which was soldered to a metal core printed circuit board (PCB) substrate. Components were soldered in batch IR oven.

Shear tests showed that the addition of titanium oxide does not significantly increase the resistance of the solder joint to mechanical damage. Titanium oxide addition was shown to not considerably influence the soldered joint’s mechanical strength compared to reference samples when soldered in batch ovens. Thermal resistance R_thj-a of MOSFETs depends on TiO₂ concentration in the composite solder joint reaching the minimum R_thj at 0.25 Wt.% of TiO₂.

Mechanical strength: TiO₂ reinforcement shows minimal impact on mechanical strength, suggesting altered liquidus temperature and microstructure, requiring further investigation. Thermal performance: thermal parameters vary with TiO₂ concentration, with optimal performance at 0.25 Wt.%. Experimental validation is crucial for practical application. Experimental confirmation: validation of optimal concentrations is essential for accurate assessment and real-world application. Soldering method influence: batch oven soldering may affect mechanical strength, necessitating exploration of alternative methods. Thermal vs mechanical enhancement: while TiO₂ does not notably enhance mechanical strength, it improves thermal properties, highlighting the need for balanced design in power semiconductor assembly.

Incorporating TiO₂ enhances thermal properties in power semiconductor assembly. Optimal concentration balancing thermal performance and mechanical strength must be determined experimentally. Batch oven soldering may influence mechanical strength, requiring evaluation of alternative techniques. TiO₂ composite solder joints offer promise in power electronics for efficient heat dissipation. Microstructural analysis can optimize solder joint design and performance. Rigorous quality control during soldering ensures consistent thermal performance and mitigates negative effects on mechanical strength.

The integration of TiO₂ reinforcement in solder joints impacts thermal properties crucial for power semiconductor assembly. However, its influence on mechanical strength is limited, potentially affecting product reliability. Understanding these effects necessitates collaborative efforts between researchers and industry stakeholders to develop robust soldering techniques. Ensuring optimal TiO₂ concentration through experimental validation is essential to maintain product integrity and safety standards. Additionally, dissemination of research findings and best practices can empower manufacturers to make informed decisions, fostering innovation and sustainability in electronic manufacturing processes. Ultimately, addressing these social implications promotes technological advancement while prioritizing consumer trust and product quality in the electronics industry.

The research shows the importance of the soldering technology used to assemble MOSFET devices.

Fused deposition modeling (FDM) nowadays offers promising future applications for fabricating not only thermoplastic-based polymers but also composite PLA/Metal alloy materials, this capability bridges the need for metallic components in complex manufacturing processes. The research is to explore the manufacturability of multi-metal parts by printing green bodies of PLA/multi-metal objects, carrying these objects to the debinding process and varying the sintering parameters.

Three different sample types of SS316L part, Inconel 718 part and bimetallic composite of SS316L/IN718 were effectively printed. After the debinding process, the printed parts (green bodies), were isothermally sintered in non-vacuum chamber to investigate the fusion behavior at four different temperatures in the range of 1270 °C−1530 °C for 12 h and slowly cooled in the furnace. All samples was assessed including geometrical assessment to measure the shrinkage, characterization (XRD) to identify the crystallinity of the compound and microstructural evolution (Optical microscopy and SEM) to explore the porosity and morphology on the surface. The hardness of each sample types was measured and compared. The sintering parameter was optimized according to the microstructural evaluation on the interface of SS316L/IN718 composite.

The investigation indicated that the de-binding of all the samples was effectively succeeded through less weight until 16% when the PLA of green bodies was successfully evaporated. The morphology result shows evidence of an effective sintering process to have the grain boundaries in all samples, while multi-metal parts clearly displayed the interface. Furthermore, the result of XRD shows the tendency of lower crystallinity in SS316L parts, whilst IN718 has a high crystallinity. The optimal sintering temperature for SS316L/IN718 parts is 1500 °C. The hardness test concludes that the higher sintering temperature gives a higher hardness result.

This study highlights the successful sintering of a bimetallic stainless steel 316 L/Inconel 718 composite, fabricated via dual-nozzle fused deposition modeling, in a non-vacuum environment at 1500 °C. The resulting material displayed maximum hardness values of 872 HV for SS316L and 755.5 HV for IN718, with both materials exhibiting excellent fusion without any cracks.

To improve the thermal performance of base fluid, nanoparticles of three types are dispersed in the base fluid. A novel theory of non-Fourier heat transfer is used for design and development of models. The thermal performance of sample fluids is compared to determine which types of combination of nanoparticles are the best for an optimized enhancement in thermal performance of fluids. This article aims to: (i) investigate the impact of nanoparticles on thermal performance; and (ii) implement the Galerkin finite element method (GFEM) to thermal problems.

The mathematical models are developed using novel non-Fourier heat flux theory, conservation laws of computational fluid dynamics (CFD) and no-slip thermal boundary conditions. The models are approximated using thermal boundary layer approximations, and transformed models are solved numerically using GFEM. A grid-sensitivity test is performed. The accuracy, correction and stability of solutions is ensured. The numerical method adopted for the calculations is validated with published data. Quantities of engineering interest, i.e. wall shear stress, wall mass flow rate and wall heat flux, are calculated and examined versus emerging rheological parameters and thermal relaxation time.

The thermal relaxation time measures the ability of a fluid to restore its original thermal state, called thermal equilibrium and therefore, simulations have shown that the thermal relaxation time associated with a mono nanofluid has the most substantial effect on the temperature of fluid, whereas a ternary nanofluid has the smallest thermal relaxation time. A ternary nanofluid has a wider thermal boundary thickness in comparison with base and di- and mono nanofluids. The wall heat flux (in the case of the ternary nanofluids) has the most significant value compared with the wall shear stresses for the mono and hybrid nanofluids. The wall heat and mass fluxes have the highest values for the case of non-Fourier heat and mass diffusion compared to the case of Fourier heat and mass transfer.

An extensive literature review reveals that no study has considered thermal and concentration memory effects on transport mechanisms in fluids of cross-rheological liquid using novel theory of heat and mass [presented by Cattaneo (Cattaneo, 1958) and Christov (Christov, 2009)] so far. Moreover, the finite element method for coupled and nonlinear CFD problems has not been implemented so far. To the best of the authors’ knowledge for the first time, the dynamics of wall heat flow rate and mass flow rate under simultaneous effects of thermal and solute relaxation times, Ohmic dissipation and first-order chemical reactions are studied.

Transient response of continuous composite material (CCM) fin made of high thermally conductive composite material is presented. The continuously varying effective properties of composite material such as thermal conductivity, heat capacity and density have been modelled using the Mori-Tanaka homogenization theory and rule of mixture. Additionally, temperature dependency of thermal conductivity, heat generation (composite materials) and convection coefficient (fluid properties) have also been incorporated. Different base boundary conditions are addressed such as oscillating heat flow, oscillating temperature, step-changing heat flow and step-changing temperature. At the other boundary, the fin is assumed to have a convective tip.

Lattice Boltzmann method is implemented using an in-house source code for obtaining the numerical solution of typical non-linear heat balance equation of the aforementioned problem under various transient base boundary conditions.

The effects of various thermal parameters such as material diffusivity ratio and conductivity ratio, area ratio and Biot number on transient response of fin and temperature distribution of fins are studied and interpreted. The heat transfer rate and time for attainment of steady state temperature of metal matrix composite (MMC) fin are found to be proportionally dependent on their diffusivity ratio. Additionally for higher values of area ratio and biot number, MMC fins are reported to dissipate the heat more efficiently in comparision to homogeneous fins in terms of time required to attain the steady state and surface temperature.

Response of transient fin associated with advanced class of material can facilitates the practicing engineers for designing high-performance and/or miniaturized thermal management devices as used in electronic packaging industries.

Studies of composite fin consisting of laminating second layer of material over the first layer have been reported previously, however transient response of CCM fin fabricated by continuously varying the volume fraction of two materials along the fin length has not been reported till date. Such material finds its application in thermal management and electronic packaging industries. Results are plotted in form of a graph for different application-wise material combinations that have not been reported earlier, and it can be treated as design data.

Effects of corrosion are very dire and mitigation of corrosion holds prime importance. Protective coatings play major role in preventing corrosion of metals and coating application is the most convenient, economical and quick solution. The purpose of the study is development of protective coatings to effectively mitigate corrosion of metal components.

A high-performance anticorrosion coating was prepared using multiple monomers and paste of functional and reinforcing fillers with extenders to protect metal components from corrosion in aggressive environmental conditions. The structures of copolymers synthesized with multiple monomers were studied by the NMR and FT-IR spectroscopic techniques. The percentage conversion of different proportions of various monomers was estimated using gas chromatography technique. The functional paste to impart superior anticorrosion properties was prepared using various functional and reinforcing fillers. The final coatings were prepared by mixing these resins with functional paste in various proportions.

The prepared anticorrosion coating was tested for high-performance mechanical and chemical properties and it was witnessed that the said coating offered desired performance properties needed for protecting metal components from corrosion.

As such it is overcoming drawbacks of two pack systems and thus has almost no limitations or implications for application on metal substrate.

Being formulated as a single pack, it is free from drawbacks otherwise involved in two pack system of conventional paints. The coating system developed is very easy to apply using conventional tools, namely, brush, spray and roller techniques. The formulation is made in such a way that it has fast-drying properties. Makes painting or coating operations cost effective and confirm the performance.

The findings of the research have anticorrosion nature that can enhance the life span of the substrates. It is specially designed for metal substrate and can protect metal substrate from corrosion in most aggressive conditions. Thus, it helps to reduce losses due corrosion and increase safety of metal structures and human being as well. As it is based on conventional material but with new formulation and technology, it has commercial possibilities to explore.

Unlike conventional protective coating systems, the said coating offered disruptive features like single pack systems and fast drying at ambient temperature along with high-performance properties. The coating formulation was observed to have a great importance in industry for effective corrosion mitigation and to reduce losses due to corrosion.

This study aims to develop a novel thermal modeling strategy to simulate electron beam powder bed fusion at part scale with machine-varying process parameters strategy. Single-bead and part-scale experiments and modeling were studied. Scanning strategies were described by the process controlling functions that enabled modeling.

The finite element analysis thermal model was used along with the powder bed fusion with electron beam experiments. The proposed strategy involves dividing a part into smaller sections and creating meso-scale models for each subsection. These meso-scale models take into consideration the variable process parameters, including power and velocity of the moving heat source, during part building. Subsequently, these models are integrated to perform partscale simulations, enabling more realistic predictions of thermal accumulation and resulting distortions. The model was built and validated with single-bead experiments and bulky parts with different features.

Single-bead experiments demonstrated an average error rate of 6%–24% for melt pool dimension prediction using the proposed meso-scale models with different scanning control functions. Part-scale simulations for three different geometries (cantilever beams with supports, bulk artifact and topology-optimized transfer arm) showed good agreement between modeled temperature changes and experimental deformation values.

This study presents a novel approach for electron beam powder bed fusion modeling that leverages meso-scale models to capture the influence of variable process parameters on part quality. This strategy offers improved accuracy for predicting part geometry and identifying potential defects, leading to a more efficient additive manufacturing process.

The study aims to explore how Soret and Dufour diffusions, thermal radiation, joule heating and magnetohydrodynamics (MHD) affect the flow of hybrid nanofluid (Al₂O₃-SiO₂/water) over a porous medium using a mobile slender needle.

To streamline the analysis, the authors apply appropriate transformations to change the governing model of partial differential equations into a group of ordinary differential equations. Following this, the authors analyze the transformed equations using the homotopy analysis method within Mathematica software, leading to the derivation of analytical solutions. This study investigates how changing values for porous medium, MHD, Soret and Dufour numbers and thermal radiation influence concentration, temperature and velocity profiles. In addition, the research assesses the effects on local Sherwood number, skin friction and Nusselt number.

In this investigation, the authors explore the movement of a needle away from its origin ( ε > 0). As the magnetic and porous medium parameters increase, there is a correspondence decrease in the velocity profile. Simultaneously, an increase in the Dufour number and thermal radiation parameter yields to a higher temperature profile, whereas arise in the Soret number results in an enhanced concentration profile. Furthermore, growth in the magnetic field parameter is correlated with a reduction in skin friction, Nusselt and Sherwood numbers. In addition, an examination of the data reveals that an escalation in the thermal radiation parameter is associated with an elevation in the Nusselt number. Moreover, an elevation in the Dufour number results in an augmentation in the Nusselt number.

These results have practical applications across diverse fields, including heat transfer enhancement, energy conversion systems, advanced manufacturing and material processing.

This study is distinctive in its investigation of the flow of hybrid nanofluid (Al₂O₃-SiO₂/water) over a slender, moving needle. The analysis includes joule heating, MHD, porous medium, thermal radiation and considering the effects of Soret and Dufour.