Search results

This study aims to investigate and compare the characteristics of three topologies of moving-magnet linear oscillating actuator (LOA) based on their mover position. Positive aspects and consequences of every topology are demonstrated. Three topologies of axially magnetized moving-magnet LOA; outer mover, inner mover (IM) and dual stator (DS) are designed and examined. Due to its characteristically high thrust density and more mechanical strength, axially magnetized tubular permanent magnets (PMs) are used in these topologies.

LOAs are designed and optimized using parametric sweep, in term of design parameters and output parameters like thrust force, stroke and operating resonance frequency of the LOA. All the pros and cons of each topology are investigated and compared. Output parameters of the LOAs are compared using same size of the investigated LOAs. Mover mass, which plays a vital role in resonant operation, is analyzed for IM and DS designs. Investigated LOAs are compared with conventional designs of LOA for compressor in refrigeration system with regards of motor constant, stroke and thrust per PM mass.

This paper analyzes three topologies of moving-magnet LOAs. The basic difference between investigated LOAs is the radius of tubular-shaped mover from its central axis. All the design parameters are compared and concluded that thrust per PM mass of IMLOA is maximum. OMLOA provides maximum motor constant of value 180 N/A. DSLOA provides thrust force with motor constant 120 N/A and required intermediate materials of PMs. All the three designs give the best results in terms of motor constant and thrust per PM mass, compared to conventional designs of LOA.

This paper determines the impact of mover position from its central axis in a tubular-shaped moving-magnet LOA. This work is carried out in correspondence of latest papers of LOA.

Because of the increasing significance of green marketing and its aspects, it develops a need for examining the impact of all these factors on green product buying behavior. As social media marketing also has an enormous positive impact on green product buying behavior, this study aims to provide a cohesive role of green marketing and social media marketing in determining green purchase behavior.

In this study, data were collected through an online survey by using convenience sampling from 692 respondents, and through structural equation modeling, the hypothesized associations among variables of this study were empirically tested.

The findings suggest that attitude, eco-labels and green advertising had a significant influence on the decision to purchase green products. The influence of peer groups, behavioral intention and price consciousness was also examined. Peer influence did not moderate the relation between green buying behavior and environmental concern.

The influence of factors like attitudes, price consciousness, behavioral intentions social media marketing, eco-labels, and environmental concern green purchase behavior has not been scrutinized cohesively in the past. The current study used the theory of planned behavior in elucidating green buying behavior.

Additive manufacturing (AM) technology has a huge influence on the real world because of its ability to manufacture massively complicated geometrics. The purpose of this study is to use CiteSpace (CS) visual analysis to identify fused deposition modeling (FDM) research and development patterns to guide researchers to decide future research and provide a framework for corporations and organizations to prepare for the development in the rapid prototyping industry. Three-dimensional printing (3DP) is defined to budget minimize manufactured input and output for aviation and the medical product industrial sectors. 3DP has implemented its potential in the Coronavirus Disease of 2019 (COVID-19) reaction.

First, 396 original publications were extracted from the web of science (WOS) with the comprehensive list and did scientometrics analysis in CS software. The parameters are specified in CS including the span (from 2011 to 2019, one year slice for the co-authorship and the co-accordance analysis), visualization (show the merged networks), specific criteria for selection (top 20%), node form (author, organization, region, reference cited; cited author, journal and keywords) and pruning (pathfinder and slicing network). Finally, correlating data was studied and showed the results of the visualization study of FDM research were shown.

The framework of FDM information is beginning to take shape. About hot research topics, there are “Morphology,” “Tensile Property by making Blends,” “Use of Carbon nanotube in 3DP” and “Topology optimization.” Regarding the latest research frontiers of FDM printing, there are “Fused Filament Fabrication,” “AM,” in FDM printing. Where “Post-processing” and “environmental impact” are the research hotspots in FDM printing. These research results can provide insight into FDM printing and useful information to consider the existing studies and developments in FDM researchers’ analysis.

Despite some important obtained results through FDM-related publications’ visualization, some deficiencies remain in this research. With >99% of articles written in English, the input data for CS was all downloaded from WOS databases, resulting in a language bias of papers in other languages and neglecting other data sources. Although, there are several challenges being faced by the FDM that limit its wide variety of applications. However, the significance of the current work concerning the technical and engineering prospects is discussed herein.

First, the novelty of this work lies in describing the FDM approach in a Scientometric way. In Scientometric investigation, leading writers, organizations, keywords, hot research and emerging knowledge points were explained. Second, this research has thoroughly and comprehensively examined the useful sustainability effects, i.e. economic sustainability, energy-based sustainability, environmental sustainability, of 3DP in industrial development in qualitative and quantitative aspects by 2025 from a global viewpoint. Third, this work also described the practical significance of FDM based on 3DP since COVID-19. 3DP has stepped up as a vital technology to support improved healthcare and other general response to emergency situations.

Draws upon a study of the ways in which entrepreneurs use trust to mediate customer perceived risk at the start of a venture in order to show how researchers can combine elements of both approaches in an epistemologically consistent way. Specifically, researchers seeking to use an inductivist/qualitative approach can start with an a priori specification of constructs, perhaps in the form of a model. One of the ways in which this can help researchers is to identify where they should look in order to find the phenomena of interest to them. We argue that the difference between inductivist and deductivist research is how they draw upon existing research: in inductivist research theory can be used where it is composed of constructs while theory represented in the form of variables is more appropriate in hypothetico‐deductive research.

The current investigation is communicated to analyze the characteristics of squeezed second grade nanofluid flow enclosed by infinite channel in the existence of both heat generation and variable viscosity. The leading non-linear energy and momentum PDEs are converted into non-linear ODEs by using suitable analogous approach.

Then the acquired non-linear problem is numerically calculated by using Bvp4c (built in) technique in MATLAB.

The influence of certain appropriate physical parameters, namely, squeezed number, fluid parameter, Brownian motion, heat generation, thermophoresis parameter, Prandtl number, Schmidt number and variable viscosity parameter on temperature, velocity and concentration distributions are studied and deliberated in detail. Numerical calculations of Sherwood number, Nusselt number and skin friction for distinct estimations of appearing parameters are analyzed through graphs and tables. It is examined that for large values of squeezing parameter, the velocity profile increases, whereas opposite behavior is noticed for large values of variable viscosity and fluid parameter. Moreover, temperature profile increases for large values of Brownian motion, thermophoresis parameter and squeezed parameter and decreases by increases Prandtl number and heat generation. Moreover, concentration profile increases for large values of Brownian motion parameter and decreases by increases thermophoresis parameter, squeezed parameter and Schmidt number.

No one has ever taken infinite squeezed channel having second grade fluid model with variable viscosity and heat generation.

The purpose of this study is to numerically investigate the influence of corner radius on the flow around two square cylinders in tandem arrangements at a Reynolds number of 100.

Six models of square cylinders with corner radii R/D = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 (where R denotes the corner radius and D denotes the characteristic dimension of the body) were studied using an immersed boundary-lattice Boltzmann method, and the results were compared with those obtained using a two-dimensional unsteady finite volume method. The cylinders were mounted in a tandem configuration (1.5 ≤ L/D ≤ 10 where L denotes the in-line separation between the cylinder centers). The simulated models were quantitatively compared to the aerodynamic force coefficients and Strouhal number. Furthermore, qualitative analysis is presented in the form of flow streamlines and vorticity contours.

The R/D and L/D values were varied to observe the variation in the flow characteristics in the gap and wake regions. The numerical results revealed two different regimes over the spacing range. The drag force on the downstream cylinder was negative for all corner radii values when the cylinders were placed at L/D = 3.0 (a single-body system). Subsequently, a sudden increase was observed in the aerodynamic forces (drag and lift) when L/D increased. A different gap value was identified in the transformation from a single-body to a two-body system for different corner radii. To verify the single-body system, a simulation was carried out with a single cylinder having a longitudinal geometric dimension equal to the tandem arrangement (L/D + D). Furthermore, in a single-body regime, the total drag of a tandem cylinder was less than that of a single cylinder, thus demonstrating the benefits of using tandem structures. A significant reduction in the aerodynamic forces and drag force was achieved by rounding the sharp corners and placing the cylinders in close proximity. An appropriate configuration of the tandem cylinders with a rounded corner of R/D = 0.4 and 0.5 at L/D = 3.0 and the range is enhanced to L/D = 4.0 for 0.0 ≤ R/D < 0.4 to achieve adequate drag reduction.

To the best of the author’s knowledge, there is a paucity of studies examining the effect of corner radius on bluff bodies arranged in a tandem configuration.

The purpose of this paper is to examine the factors affecting quality of work life (QWL) of teachers working in Higher Education Institutions.

A cross-sectional study was conducted by sampling 347 teaching faculty members through questionnaires.

Fair communication plays the strongest role and social networks have the weakest role in shaping the QWL in higher educational institutions (HEIs) of Pakistan. The relationship of social networks and QWL negates the Hofstede’s view of Pakistan society to a great extent.

A cross-sectional data set is used for tapping a small sample size. The direct effects of four factors were considered for examination. The examination of indirect effects for the factors having weak effects is recommended.

Decision makers having intentions to improve QWL in HEIs must adopt procedural justice and effective communication channels; they should have high respect for employees and should help them to develop networks within the HEIs.

Inter-relationships at workplace are hampering due to weak social networks.

The study is an important landmark in highlighting the factors that must be available for higher QWL of faculty members of public sector HEIs.

The unsustainable practices of hotels have greatly contributed to ecological imbalances, encompassing excessive energy and water consumption, improper waste disposal and inadequate resource management. Information publicity (IP) plays an effective role in influencing tourists' intentions to visit green hotels. Therefore, the current study has incorporated IP into the value-belief norm (VBN) framework to examine tourists' intentions to visit green hotels.

This study is a correlational research design, and the purposive sampling technique was employed for the data collection. The study used 355 valid data and analyzed them via partial least squares structural equation modeling (PLS-SEM).

The study results show that egoistic values have the greatest impact on pro-environmental beliefs (ENBs). In addition, the results indicate the impact of ENB and IP on personal norms (PNs), leading toward the intention to visit green hotels.

This study helps hotel managers devise and execute effective marketing strategies for green hotels. Hospitality marketers should pay more attention to values, orientations and IP, emphasizing the significance of these factors in increasing the visits of customers to green hotels.

IP, an important factor that informs tourists about hotels that are environmentally friendly, has been neglected in the tourism research. This research examines the significance of IP in developing ENBs and influencing the PN of tourists.

This study aims to explore the factors affecting the adoption of digital reference services (DRS) among the university librarians in Pakistan.

Based on the adapted unified theory of acceptance and use of technology (UTAUT) model, the proposed study tested 12 hypothetical relationships through structural equation modelling (SEM) techniques. The study approach was quantitative based on a questionnaire distributed online to a sample of Pakistani university librarians and completed by 289 respondents. The questionnaire used in this study was developed from other validated instruments used in past empirical studies. Descriptive and inferential data analyses were performed through SPSS and AMOS for SEM.

The results revealed usefulness, ease of use and information and communication technology (ICT) skills as the significant predictors of the adoption of DRS. However, moderating influence of the demographic factors (age, gender and type of library) on the relationship of predictors with outcome variable was found insignificant. The findings of this study imply that individuals’ readiness for the adoption of DRS is present in the university libraries of Pakistan.

In the context of Pakistan, this study was the first attempt that investigated factors of the adoption of DRS at individual level. In addition, two new factors – namely, ICT skills and library type – were incorporated into the UTAUT model and were then evaluated in the Pakistani context. However, these two factors were found insignificant in influencing librarians towards the adoption of DRS. The intended study is equally useful for librarians in other countries in terms of understanding the factors that impact the effective adoption of DRS.

The purpose of this paper is to review the literature about oriental manuscript collections in India and provide an overview of the area.

A core set of literature on oriental manuscript collections in India was retrieved after doing a thorough literature search in different databases. Literature on various aspects of this topic was reviewed. The paper is organized based on various themes to make the study fruitful for various sections of society.

Oriental manuscripts are present in different research libraries, university libraries and public libraries in India but university libraries are leading others in preserving these manuscripts, with few exceptions. Manuscripts are available in different oriental languages but mostly in Sanskrit. Every religious sect in India has contributed immensely in collecting and preserving these manuscripts. The contribution of famous kings of Indian history is also enormous in this regard.

The review does not claim to be exhaustive, as most sources might have been skipped during the study for their non‐availability.

This paper provides a concise overview of manuscripts present in different Indian libraries and research institution/universities and provides a valuable entry point to the field of Indian manuscripts for research scholars, information scientists and other interested parties.