Search results

This paper aims to focus on 11 digital technologies (i.e. building information modeling, artificial intelligence and machine learning, 3D scanning, sensors, robots/automation, digital twin, virtual reality, 3D printing, drones, cloud computing and self-driving vehicles) that are portrayed in future trend reports and hype curves. The study concentrates on the current usage and knowledge of digital technologies in the Swedish architecture, engineering and construction (AEC) industry to gain an insight in the possible expectations and future trajectory of these digital technologies.

The study applies an abductive approach which is based on three different types of methods. These methods are a literature and document study which focused on 11 digital technologies, two workshops with industry (13 participants) and an online survey (N = 84).

The paper contributes to a current state analysis of the Swedish AEC industry concerning digital technologies and discusses the trajectory of these technologies for the AEC industry. The paper identifies hype factors, in which the knowledge of a digital technology is related to its usage. From the hype factors, four zones that show different stages of digital technology usage and maturity in the industry are induced.

The contribution of the paper is twofold. The paper shows insight into opportunities, the current barriers, use and knowledge of digital technologies for the different actors in the AEC industry. Furthermore, the study shows that the AEC industry is behind the traditional Gartner hype curves and contributes with defining four zones for digital technologies for the Swedish AEC industry: confusion, excitement, experimentation and integration.

Smallholder value chains are dynamic, changing over time in sudden, unpredictable ways as they adapt to shocks. Understanding these dynamics and adaptation is essential for these chains to remain competitive in turbulent markets. Many guides to value chain development, though they focus welcome attention on snapshots of current structure and performance, pay limited attention to the dynamic forces affecting these chains or to adaptation. The paper aims to discuss these issues.

This paper develops an expanded conceptual framework to understand value chain performance based on the theory of complex adaptive systems. The framework combines seven common properties of complex systems: time, uncertainty, sensitivity to initial conditions, endogenous shocks, sudden change, interacting agents and adaptation.

The authors outline how the framework can be used to ask new research questions and analyze case studies in order to improve our understanding of the development of smallholder value chains and their capacity for adaptation.

The framework highlights the need for greater attention to value chain dynamics.

The framework offers a new perspective on the dynamics of smallholder value chains.

This paper aims to focus on time-constrained interactions involving industry and public actors, mainly universities, conducting research. This kind of interaction has become increasingly important to develop new pharmaceuticals, especially antibiotics. The proposed theoretical frame relies on industrial marketing and purchasing’s interactive perspective on inter-organizational relationships and especially the activities, resource, actors model, combined with key concepts on temporary organizing and project management. This study identifies the temporality and time constraints imposed by this project on public–private interactions, specific coordination tools used to create such temporality and time constraints and their consequences, including positive and negative effects for the interacting parties.

The study builds on a single in-depth qualitative case study of a major antibiotics R&D collaboration project called ENABLE.

For negative consequences, this model includes the need for constantly rebuilding trust due to fast turnover of actors, difficulties in combining resources as efficiently as possible, resource constraints, bottlenecks and neglect of some activities, such as publishing, which are normally pivotal for universities. Despite these problematic consequences of temporality, resources are rapidly made available and new competencies learned quickly. Another positive effect is the possibility to achieve complex adaptations of resources and activities even in short time frames. Importantly, projects can act as a springboard for the parties to continue collaboration and in the long term develop a continuous business relationship.

Based on the findings the authors develop a model of time-constrained inter-organizational interaction between public and private organizations.

This study aims to enhance the theoretical foundations of servitization research by establishing a theoretical connection with complexity management. The authors develop a conceptual framework to describe complexity management mechanisms in servitization and digital platforms' specific role in allowing synergies between complexity reduction and absorption mechanisms.

A theory adaptation approach is used. Theory adaptation introduces new perspectives and conceptualization to the domain theory (servitization, with a focus on the role of digital platforms) by informing it with a method theory (complexity management).

This study provides four key contributions to the servitization literature: (1) connecting the servitization and complexity-management terminologies, (2) identifying and classifying complexity-management mechanisms in servitization, (3) conceptualizing digital platforms' role in servitization complexity management and (4) recognizing digital platforms' complexity-management synergies.

This study highlights that by using digital platforms in servitization and understanding the platform approach more thoroughly, companies can gain new capabilities and opportunities to manage and leverage complexity.

The purpose of this study is to evaluate the rainfall intensities and their limits for durations from 0.25 to 8 h with return periods from 2 to 100 years for Ca Mau City in Vietnam.

First, the quality of the historical rainfall data series in 44 years (1975–2018) at Ca Mau station was assessed using the standard normal homogeneity test and the Pettitt test. Second, the appraised rainfall data series are used to establish the rainfall intensity-duration-frequency curve for the study area.

Based on the findings, a two-year return period, the extreme rainfall intensities (ERIs) ranged from 9.1 mm/h for 8 h rainstorms to 91.2 mm/h for 0.25 h. At a 100-year return period, the ERIs ranged from 18.4 mm/h for 8 h rainstorms to 185.8 mm/h for 0.25 h. The results also show that the narrowest uncertainty level between the lower and upper limits recorded 1.6 mm at 8 h for the two-year return period while the widest range is at 42.5 mm at 0.25 h for the 100-year return period. In general, the possibility of high-intensity rainfall values compared to the extreme rainfall intensities is approximately 2.0% at the 100-year return period.

The results of the rainfall IDF curves can provide useful information for policymakers to make the right decisions in controlling and minimizing flooding in the study area.

Representations of time are commonly used to construct narratives in visualisations of data. However, since time is a value-laden concept, and no representation can provide a full, objective account of “temporal reality”, they are also biased and political: reproducing and reinforcing certain views and values at the expense of alternative ones. This conceptual paper aims to explore expressions of temporal bias and politics in data visualisation, along with possibly mitigating user approaches and design strategies.

This study presents a theoretical framework rooted in a sociotechnical view of representations as biased and political, combined with perspectives from critical literacy, radical literacy and critical design. The framework provides a basis for discussion of various types and effects of temporal bias in visualisation. Empirical examples from previous research and public resources illustrate the arguments.

Four types of political effects of temporal bias in visualisations are presented, expressed as limitation of view, disregard of variation, oppression of social groups and misrepresentation of topic and suggest that appropriate critical and radical literacy approaches require users and designers to critique, contextualise, counter and cross beyond expressions of the same. Supporting critical design strategies involve the inclusion of multiple datasets and representations; broad access to flexible tools; and inclusive participation of marginalised groups.

The paper draws attention to a vital, yet little researched problem of temporal representation in visualisations of data. It offers a pioneering bridging of critical literacy, radical literacy and critical design and emphasises mutual rather than contradictory interests of the empirical sciences and humanities.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

The purpose of this study concerns numerical studies and experimental validation of the mechanical behavior of hybrid specimens. These kinds of composite specimens are made up of thin carbon and glass substrates on which some Macro Fiber Composite^® (MFC) piezoelectric patches are glued. A proper design and manufacturing of the hybrid specimens as well as testing activities have been performed. The research activity has been carried out under the FutureWings project, funded by the European Commission within the 7th Framework.

The paper describes the basic assumptions made to define specimen geometries and to carry out experimental tests. Finite element (FE) results and experimental data (laser technique measurements) have been compared: it shows very good agreement for the displacements’ distribution along the specimens.

Within the objectives of the project, the study of passive and active deformation characteristics of the hybrid composite material has provided reference technical data and has allowed for the correct adaptation of the FE models. More in particular, using the hybrid specimens, both the bending deformations and the torsion deformations have been studied.

The deformation capability of the hybrid specimens will be used in the development of prototypical three-dimensional structures, that, through the electrical control of the MFC patches, will be able to change the curvature of their cross section or will be able to change the angle of torsion along their longitudinal axis.

The design of nonstandard specimens and the tests executed represent a novelty in the field of structures using piezoelectric actuators. The numerical and experimental data of the present research constitute a small step forward in the field of smart materials technology.

In the context of Portugal, this study examines the stereotypes of accountants held by laypeople and how they are influenced by financial crises and accounting scandals.

To better understand the social images of accountants, the authors adopt a structural approach based on the big five model (BFM) of personality. The authors test this approach on a Portuguese community sample (N = 727) using a questionnaire survey. The results are analyzed considering the socioanalytic theory.

The results suggest the existence of a stereotype dominated by features of conscientiousness, which is related to the superior performance of work tasks across job types. This feature comprises the core characteristics of the traditional accountant stereotype, which survives in a context challenged by financial scandals and crises. The findings highlight the social acceptance of accountants as an occupational group but do not suggest the possibility of accountants benefiting from the highest levels of social status when considered in relation to the traditional accountant stereotype.

By combining the BFM and the socioanalytic theory, this study provides a unique theoretical approach to better understand the social images of accountants. The findings demonstrate the suitability of using the BFM to study the social perceptions of accountants. They also indicate a paradox based on the survival of the traditional stereotype. This stereotype appears to be resistant to scandals and financial crisis, instead of being impaired, giving rise to another prototype with concerns about integrity.

The purpose of this study is to describe the design and validation of a three-dimensional (3D)-printed phantom of a uterus to support the development of uterine balloon tamponade devices conceived to stop post-partum haemorrhages (PPHs).

The phantom 3D model is generated by analysing the main requirements for validating uterine balloon tamponade devices. A modular approach is implemented to guarantee that the phantom allows testing these devices under multiple working conditions. Once finalised the design, the phantom effectiveness is validated experimentally.

The modular phantom allows performing the required measurements for testing the performance of devices designed to stop PPH.

PPH is the leading obstetric cause of maternal death worldwide, mainly in low- and middle-income countries. The proposed phantom could speed up and optimise the design and validation of devices for PPH treatment, reducing the maternal mortality ratio.

To the best of the authors’ knowledge, the 3D-printed phantom represents the first example of a modular, flexible and transparent uterus model. It can be used to validate and perform usability tests of medical devices.