Search results

The purpose of this paper is to evaluate the photochromic performance of photochromic compounds in polymer matrices.

The poly(methyl methacrylate) (PMMA) and epoxy resin doped with photochromic spirobenzopyran were prepared and the effects of ultraviolet (UV) irradiation were studied using spectrophotometer. The reversible reaction was effected using white light. Photochemical fatigue resistance of these films was also studied.

Irradiation of colourless 1′,3′,3′‐trimethyl‐6‐nitrospiro[2H‐1‐benzopyran‐2,2′‐indoline] spiropyran (SP) doped in PMMA and epoxy resin with UV light (366 nm) results in the formation of an intense purple‐red coloured zwitterionic photomerocyanine (PMC). The reverse reaction was photochemically induced by irradiation with white light. Photocolouration of SP doped in PMMA follows a first‐order rate equation (k=0.0011 s⁻¹), while that doped in epoxy resin deviates from linearity. It was found that photobleaching follows a first‐order equation in both matrices. The photobleaching rate constant of PMC in both matrices is the same and equals 0.0043 s⁻¹. Spirobenzopyran doped in PMMA shows better fatigue resistance than that doped in epoxy resin.

The PMMA and epoxy resin polymers doped with photochromic spirobenzopyran described in the present paper were prepared and studied. The principle of study established can be applied to any type of polymer or to any type of photochromic compounds.

The photochromic materials developed can be used for different applications, such as coatings and holography.

The method developed may be used to enhance the performance of photochromic materials.

The purpose of this paper is to evaluate the photochromic performance of photochromic compounds in polymer matrices.

The poly(methyl methacrylate) PMMA and epoxy resin doped with photochromic spirooxazine (SO) are prepared and the effects of ultraviolet (UV) irradiation are studied using spectrophotometer. The reversible reaction is effected using white light. Photochemical fatigue resistance of these films is also studied.

Irradiation of colourless 7′,8′‐dichloro‐1,3,3‐trimethylspiro[indoline‐2,3′‐[3H]benzo[b][1,4]oxazine] (SO) doped in PMMA and epoxy resin with UV light (366 nm) results in the formation of an intense purple‐red coloured zwitterionic photomerocyanine (PMC). The reverse reaction is photochemically induced by irradiation with white light. Photocolouration and photobleaching reactions follow a first‐order rate equation. It is found that photocoloration rate constant of (SO) in both matrices is almost the same, which is unexpected. On the other hand, the rate of photobleaching reaction of (PMC) in PMMA is twice slower than that in the epoxy resin. It seems that the presence of the two chlorine atoms at positions 7′ and 8′ of the benzooxazine moiety destabilise the PMC in epoxy resin film and results in speeding up the fading process compared to that in PMMA. SO doped in epoxy resin shows much better fatigue resistance than that doped in PMMA.

The PMMA and epoxy resin polymers doped photochromic spirobenzooxazine described in this paper were prepared and studied. The principle of study established can be applied to any type of polymer or to any type of photochromic compounds.

The photochromic materials developed can be used for different applications, such as coatings and holography.

The method developed may be used to enhance the performance of photochromic materials.

The purpose of this paper is to investigate the effect of annealing on photochromic performance of (E)‐dicyclopropylmethylene‐(2, 5‐dimethyl‐3‐furylethylid‐ene)‐succinicanhydride doped in polyacrylic acid thin film.

(E)‐dicyclopropylmethylene‐(2,5‐dimethyl‐3‐furyl‐ethylidene)‐succinic‐anhydride (DMDFS‐E) fulgide doped in polyacrylic acid thin films was prepared. DMDFS‐E fulgide doped in polyacrylic acid thin films was heated at various annealing temperatures. Photocoloration, photobleaching and photochemical fatigue resistance for the desired DMDFS‐E fulgide doped in polyacrylic acid thin films were studied.

Upon irradiation with UV light (366 nm), fulgide DMDFS‐E undergoes a conrotatory ring closure to the pinkish colored closed form C (523 nm). The later color was switched back to the original color when the films were irradiated with white light. The kinetics of photocoloration and photobleaching processes were followed spectrophotometrically by monitoring the absorbance of the ring closed product DMDFS‐C at its λmax of 523 nm. The first‐order plots of photocoloration reaction showed distinct linear line at different temperatures. The slope of these first‐order lines corresponding to the rate constants k. It was found that for photocoloration reaction, the rate constant of the photocoloration reaction was slower than the photobleaching reaction and both reactions decrease with increasing the annealing temperatures. It was found that there was almost improvement of photochemical fatigue resistance of fulgide DMDFS‐E doped in polyacrylic acid thin film at several of the annealing temperatures.

The results obtained in this work showed that the photochromic properties of DMDFS fulgide E were improved upon annealing the film at 100°C. Therefore, it would be recommended for improvement to apply fulgides as annealed polymer films.