Search results

Money laundering (ML) is a major criminal offence stemming from unethical practices by personnel on the ground at Chattogram Port, an important import and export facility in Bangladesh. Because money can be more easily laundered through imports, it is necessary to investigate the dubious process in this sector. This study aims to identify the items most regularly used for easy ML and the factors contributing to their vulnerability.

This research uses a qualitative approach and analyses information from primary sources. Data is obtained from customs officials, port authority personnel, importers and customs brokers through semi-structured questionnaires. Although there are many techniques for ML, this study only found three most overwhelming: under-invoicing, over-invoicing and misdeclaration. A few case studies have been used based on newspaper reports and the internet to triangulate the qualitative data.

Four import items – food products, garments, capital machinery and chemicals – have a higher risk of ML. This study also revealed that money launderers prefer under-invoicing food and garment items. Misdeclaration is more commonly associated with capital machinery and chemical items. Over-invoicing, on the other hand, is only prevalent in government purchases. The port authorities need to pay particular attention to these issues.

As ML is an ongoing activity that changes over time, the findings of this research are circumscribed by the data collected at a single point in time. Additionally, this research did not consider alternative laundering methods.

The research results can provide a basis for creating effective anti-money laundering (AML) strategies to assist with sustainable economic growth.

Developing effective AML measures can help combat corruption and establish good governance in the country and support human well-being.

This paper presents original research findings based on technical analysis. The Chattogram Port Authority and the National Board of Revenue have accepted and used the main findings in a collaborative action plan to tackle ML. The Bangladesh Bank, the country’s central bank, has also incorporated the necessary guidelines and regulations into the Money Laundering Prevention Act, 2012.

As host to over one million Syrian refugees, Lebanon continues to experience challenges addressing the needs of refugee families. This research examined the experiences of Syrian families with the refugee support system in Lebanon. The purpose of this study was to better understand the strengths and gaps in existing mechanisms of support for these Syrian families, including informal support from family, neighbors and community and more formalized support provided through entities such as nongovernmental organizations and United Nations agencies.

Data were collected from 46 families displaced by the war and living in Lebanon (N = 351 individuals within 46 families). Collaborative family interviews were conducted with parents, children and often extended family.

The data identified both strengths and gaps in the refugee support system in Lebanon. Gaps in the refugee support system included inadequate housing, a lack of financial and economic support, challenges with a lack of psychosocial support for pregnant women and support for disabled youth. Despite these challenges, families and community workers reported informal community support as a strong mediator of the challenges in Lebanon. Furthermore, the data find that organizations working with Syrian families are utilizing informal community support through capacity building, to create more effective and sustainable support services.

This study provides an overview of strengths and gaps in supports identified by refugees themselves. The research will inform the development and improvement of better support systems in Lebanon and in other refugee–hosting contexts.

The continued relevance of technologies in halal industries requires managers to understand the factors contributing to such technologies’ acceptance. The technology acceptance model (TAM) is dominant in the literature that predicts user acceptance and behaviour towards technology. Despite the model’s significance, there has yet to be a systematic review of studies featuring halal sectors that use TAM. The purpose of this study is to systematically review the existing literature on TAM in halal industries to understand the research trends as well as TAM modifications and research opportunities in halal industries.

Guided by the preferred reporting items for systematic review and meta-analysis protocol, a framework-based review using the theories, contexts, characteristics and methods (TCCM) framework was conducted. The Scopus and Web of Science databases were used to retrieve English journal articles that investigated TAM in the context of halal markets. In total, 44 eligible articles were reviewed in terms of the developments and extensions of TAM in their studies across the halal industries.

The first study related to the use of TAM in the context of halal industries was published in 2014. The most prominent halal industry in the review, which used TAM, was Islamic finance. Indonesia was the leading economy in halal studies using TAM. Perceived usefulness was found to be a more significant factor than perceived ease of use for technology acceptance in TAM studies on halal industries. The significance of religiosity on TAM was inconsistent. Most research was done using quantitative surveys with consumers as the target sample.

The studies in this review are based on the Scopus and Web of Science databases, which may be perceived as a study limitation. This study also only considered English journal articles and research in which the focus was on the use of TAM in halal industries rather than general industries with Muslim consumers.

Halal industries will continue to rely on technology for the provision of goods and services. With the rise of emerging technological innovations, this review will provide managers with an appreciation of technology acceptance across different contexts. Researchers can use the results of this review to guide future studies and contribute toward the development of this research area.

This review contributes to the Islamic marketing literature by being the first to comprehensively review the TAM model in the context of halal industries using the TCCM framework-based review approach. A research agenda is proposed to advance research on technology acceptance and TAM in halal industries.

The current environment is unhelpful to female entrepreneurs, and they need to overcome numerous barriers when starting their own businesses. In this study, the researchers investigated the significant barriers that Pakistani female entrepreneurs require to overcome in this respect.

In this study, the researchers used a quantitative study and they used a questionnaire to survey the respondents and collect cross-sectional data. The researchers targeted female students who were undertaking bachelor’s and master’s degree programs in different Pakistani public and private sector universities. Accordingly, the researchers based this study’s findings on the usable samples received from 498 Pakistani female students.

The researchers used a structural equation model (SEM) in this study and its findings highlight that aversion to risk (ATR) has an insignificant impact on entrepreneurial inclinations (EI). In addition, fear of failure (FoF), lack of resources (LoR), aversion to hard work and stress (ASH) and the lack of social networking (LSN) have negative and insignificant effects on EI. The ATR factor has an insignificant effect on entrepreneurial success (ES), whereas FoF, LoR, ASH and LSN are negative and insignificant predictors of Pakistani female students’ ES.

This study’s findings may help Pakistani women to overcome the barriers to ES. In this respect, the researchers recommend that the Pakistan Government and policymakers develop significant strategies to provide the conducive business environment and to financially support Pakistani women to start their own businesses. Furthermore, this study’s findings contribute greatly to the vast amount of current literature and help to overcome the entrepreneurial conditions and barriers that potential entrepreneurs from advanced and developing countries experience frequently.

This study’s findings provide empirical evidence of EI and ES in Pakistan.

Studies show that building information modelling (BIM) technology can improve construction productivity regarding the design, construction and maintenance of a project life cycle in the 21st century. Revit has been identified as a frequently used tool for delivering BIM in the built environment. Studies about BIM technology via Revit are scarce in training middle-level workforce higher education institutions. Thus, this study aims to investigate the relevance of BIM technology and offer measures to promote digitalisation in Nigeria’s built environment polytechnic undergraduates via Revit.

Given the unexplored nature of training the middle-level workforce in Nigeria, 37 semi-structured virtual interviews were conducted across Nigeria, and saturation was achieved. The participants were knowledgeable about construction-related BIM. The researchers used a thematic analysis for the collected data and honed them with secondary sources.

Improved visualisation of design, effective and efficient work productivity, automatic design and quantification, improved database management and collaboration and data storage in the centrally coordinated model, among others, emerged as BIM’s benefits. BIM technology via Revit is challenging, especially in Nigeria’s polytechnic education curriculum. The 24 perceived issues were grouped into government/regulatory agencies-related, polytechnic management-related and polytechnic undergraduate students-related hindrances in Nigeria’s built environment.

This study is limited to BIM implications for Nigeria’s built environment polytechnic undergraduates.

This study contributes to the literature paucity in attempting to uncover perceived issues hindering the implementation of BIM technology via Revit in training Nigeria’s built environment polytechnic undergraduates via a qualitative approach.

This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D scanning with the Kinect sensor and conducts a comparative analysis of SAFO durability with varying thicknesses and materials, including polylactic acid (PLA) and carbon fiber-reinforced (PLA-C), to address research gaps from prior studies.

In this study, the methodology comprises key components: data capture using a cost-effective Microsoft Kinect® Xbox 360 scanner to obtain precise leg dimensions for SAFOs. SAFOs are designed using CAD tools with varying thicknesses (3, 4, and 5 mm) while maintaining consistent geometry, allowing controlled thickness impact investigation. Fabrication uses PLA and PLA-C materials via FDM 3D printing, providing insights into material suitability. Mechanical analysis uses dual finite element analysis to assess force–displacement curves and fracture behavior, which were validated through experimental testing.

The results indicate that the precision of the scanned leg dimensions, compared to actual anthropometric data, exhibits a deviation of less than 5%, confirming the accuracy of the cost-effective scanning approach. Additionally, the research identifies optimal thicknesses for SAFOs, recommending a 4 and 5 mm thickness for PLA-C-based SAFOs and an only 5 mm thickness for PLA-based SAFOs. This optimization enhances the overall performance and effectiveness of these orthotic solutions.

This study’s innovation lies in its holistic approach, combining low-cost 3D scanning, 3D printing and computational simulations to optimize SAFO materials and thickness. These findings advance the creation of cost-effective and efficient orthotic solutions.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

The purpose of this paper is to investigate the performance of bio-based lubricants (BBL), namely, palm mid-olein (PMO) enriched with an antioxidant agent, tertiary-butylhydroquinone (TBHQ) and a viscosity improver, ethylene-vinyl acetate (EVA), in journal bearing (JB) applications.

Samples of the BBL were prepared by blending it with TBHQ and EVA at various blending ratios. The oxidative stability (OS) and viscosity of the BBL samples were examined using differential scanning calorimetry and a viscometer, respectively. Meanwhile, their performance in JB applications was evaluated through the use of a JB test rig with a 0.5 length-to-diameter ratio at various operating conditions.

It was found that the combination of PMO + TBHQ + EVA demonstrated a superior oil film pressure and load-carrying capacity, resulting in a reduced friction coefficient and a smaller attitude angle compared to the use of only PMO or VG68. However, it was observed that the addition of TBHQ and EVA to the PMO did not have a significant impact on the minimum oil film thickness.

The results would be quite useful for researchers generally and designers of bearings in particular.

This study used PMO as the base stock, and its compatibility with TBHQ and EVA was investigated in terms of its OS and viscosity. The performance of this treated BBL was evaluated in a hydrodynamic JB.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0363/

The objective of this study was to delineate and compare enteral nutrition (EN) practices among neonatal units across the Arabian Gulf countries.

A cross-sectional study was conducted by recruiting 255 clinicians working in neonatal units in the Arabian Gulf countries.

Out of 255 invited clinicians, 73 (29%) participated in the survey. Neonatal units used varied EN strategies, where feeding practices exhibited variability. The majority (74%) of units had a local standard feeding protocol, while 18% followed international protocols, and 8% did not adhere to a specific protocol. When maternal milk was not used, the main alternatives were preterm formula (67%) and predigested formula (14%). The age at which the first EN was commenced and the reported advancement rate showed significant variations among different units (p < 0.001). The initiation of fortification was primarily driven by reaching a specific enteral volume (commonly reported as 100 mL/kg/day) and addressing poor postnatal growth. Fortification practices did not differ significantly among professions, except for the initial fortification strength, where none of the dietitians and only 8.3% of neonatologists preferred full strength, compared to 28.6% and 21.4% of medical residents and nurses, respectively (p = 0.033).

This study marks the first exploration of EN practices in neonatal units, examining their local and cross-country variations. It provides valuable insights to guide local trials and foster global collaboration among neonatal units to establish a unified knowledge base, standardized practices and promote research and innovation, ultimately contributing to optimal feeding practices for very preterm infants.

This study aims to investigate the impact of housing knowledge, housing challenges and housing policy on the renting intention and satisfaction of young people.

A questionnaire survey helped collect data from young people in the study area, which were then analysed using the Statistical Package for the Social Sciences (SPSS) 27 software. A descriptive analysis and the Cronbach’s alpha test were adopted to analyse the data. The confirmatory factor analysis confirmed a significant relationship between housing knowledge, housing challenges and housing policy and renting intention and satisfaction.

The overall findings revealed that most young people intend to own a home one day, and a minority of them decided to continue renting. The findings suggest that there is a significant relationship between housing knowledge and housing intention. However, housing challenges and housing policies do not appear to impact renting intentions. On the other hand, housing knowledge and housing challenges were found to be associated with housing satisfaction, while housing policy does not show a significant relationship.

This study, however, poses limitations as it uses a limited model and location and involves only a cross-sectional study. Future studies can use the methodology used in this study to conduct further investigations on housing intention and satisfaction in other regions of the country, thereby validating the findings of this study.

In terms of practical implications, this study has made a valuable contribution to the field of housing literature by shedding light on two crucial elements, namely, housing intention and satisfaction, which have been understudied. Understanding the determinants of housing intention and satisfaction is vital in efforts to implement appropriate policy reforms.

Findings from this study offer valuable insight related to managerial and practical implications, with the former implicating a need to prioritise initiatives that enhance renters’ housing knowledge. Implementing educational programmes and providing accessible resources can empower renters with a better understanding of the rental process and other important housing information.

This paper is relevant because it provides a guideline for policymakers to initiate regulations concerning housing and implement appropriate policy reforms. This study can also help housing providers develop more affordable housing that meets the needs of young people currently renting because most have expressed their housing intentions. Understanding housing intention and satisfaction determinants is vital to implementing appropriate policy reforms.