Search results

This study describes a series of experiments investigating the upper hot layer temperature profile in a confined space under different ventilation conditions for porosity-controlled wood crib fires for pre-flashover conditions.

Full-scale compartment (4 m × 4 m × 4 m) experiments were carried out for four-door openings, i.e. 100%, 75%, 50% and 25% of the total vent area (2 m × 1 m) with the wood crib as a fuel load. The temperature of the upper hot smoke layers of the compartment was recorded with the help of four layers of thermocouples for varying vent areas.

The effect of ventilation on the properties, i.e. mass loss rate, enclosure temperature, heat release rate and carbon monoxide (CO) gas concentration, has been measured and analyzed. The effect of ventilation on heat flux and flame temperature has also been studied. Compartment gas temperature has been examined by five wood crib burning stages: Ignition, growth, steady burning, recess and collapse.

Findings demonstrate that the influence of vent openings varies for the burning parameters and upper layer temperature of the compartment. The current results are beneficial in analyzing thermal risks concerning compartment fire and fire safety engineering projects.

Industry 4.0 has received significant attention in today's competitive business market, necessitating a restructuring of functional domains in nearly every manufacturing organization. A comprehensive strategy to improve performance in preparation for Industry 4.0 implementation necessitates several steps, one of which is the establishment of performance outcomes (POs). The aim of this paper is to identify and rank the POs realized due to the adoption of Industry 4.0 enablers.

Based on an extensive literature review and inputs received from experts, a comprehensive list of enablers and the POs was prepared and finalized. This paper proposes a framework based on hybrid solution methodology, namely Neutrosophic Analytical Hierarchy Process (N-AHP) and Neutrosophic Combined Compromise Solution (N-CoCoSo), to rank the POs realized due to the adoption of Industry 4.0 enablers. The N-AHP methodology has been adopted to calculate the relative weights of the Industry 4.0 enablers. In comparison, the N-CoCoSo method has been adopted to rank the POs of Industry 4.0.

The proposed framework is applied to an Indian manufacturing organization to test the organization's practical applicability. Additionally, sensitivity analysis is also carried out to check the steadiness of the proposed framework. The findings of this study revealed that “Improved responsiveness to market conditions in today's competitive business environment” is the top-ranked PO of Industry 4.0, followed by “Enhanced competitiveness and better market share”, “Better product quality, through smart management of production process” and “Reduction in manufacturing waste and environmental sustainability” which could be realized due to adoption of its enablers.

This research would aid practitioners by enhancing the practitioners' capacity to understand and prioritize the various POs resulting from implementing Industry 4.0 enablers. Embracing a clear strategic plan will further assist practitioners in improving the efficiency of Industry 4.0 implementation.

Previous literature has only addressed the relationship between Industry 4.0 enablers and POs in a limited way. This paper attempts to compile a comprehensive list of Industry 4.0 enablers relevant to manufacturing organizations in order to fill this knowledge and research gap.

In recent times, digital transformation (DT) has witnessed a surge in popularity, not only within large enterprises (LEs) but also among small and medium-sized enterprises (SMEs). Various sectors, including manufacturing, have shown a keen interest in embracing DT for their operational and supply chain needs. Beyond delivering benefits such as improved product quality, revenue growth, enhanced customer service and heightened safety measures, DT offers a range of advantages, including heightened productivity, risk mitigation and environmental protection. However, in developing countries like India, manufacturing SMEs encounter significant challenges when attempting to embrace DT. Therefore, this study aims to identify and model the obstacles that impede DT adoption within the context of Indian manufacturing SMEs.

The literature review was used to pinpoint the barriers to adopting DT. Subsequently, these identified barriers underwent validation within the specific context of Indian manufacturing SMEs through the assessment of an expert team. The expert team proceeded to model these barriers using the interpretive structural modeling approach.

This study shows that high investment, return on investment and multiskilled workforces are the most crucial barriers to DT adoption. The proposed study aids policy and decision-makers in identifying the connections and dependencies between the barriers.

It provides a guideline for practitioners to deal with DT adoption barriers in the Indian manufacturing SMEs.

This study examines how compliance with government and firm's own policy and reverse logistics practices relate with firm environmental performance.

This study draws on insights from stakeholder theory, and follows a two-phase research approach. The first phase utilized an extended literature review that seeks to provide a qualitative and comprehensive understanding of the research problem. The 2001–2023 data was collected from the Web of Science and Scopus databases, complemented with Google Scholar. The second phase involved an empirical study—adopting a quantitative cross-sectional survey design with a self-administered questionnaire to validate the theoretical conceptualizations deriving from the literature review. The empirical data were collected from 203 food and beverages manufacturing firms in Uganda and analysed using the partial least squares structural equation modelling (PLS-SEM) approach.

The study findings suggest that compliance with government policy positively influences firm environmental performance, both directly, and indirectly through fostering reverse logistics practices, and that the relationship between compliance with government policy and reverse logistics practices is contingent upon compliance with the focal firm's own policy.

The study findings will enhance the theoretical and conceptual development of the ideas that underpin stakeholder theory and applications. The Ugandan government will come up with better mechanisms for enforcing compliance with policy regulating the application of reverse logistics practices. In addition, the study advances the use of multi-method approaches in investigating interesting research aspects requiring in-depth examination. However, considering the fact that the empirical study was conducted in a single country context, and focused on firms more or less from the same sub-sector, the findings of the study might not be generalizable globally.

This study provides useful insights to logistics and supply chain managers involved in reverse logistics activities in food and beverages manufacturing firms. These managers can know how to leverage reverse logistics practices to enhance environmental performance of firms amidst environmental policies in the industry where they operate.

This study contributes to the built body of knowledge in operations, logistics and supply chain management literature; understanding about reverse logistics practices as a mechanism through which compliance with government policy influences environmental performance of firms. The interaction between compliance with government policy and compliance with firm policy is essential in explaining the performance effects of reverse logistics practices. In addition, the study advances the use of multi-method approaches in investigating interesting research aspects requiring in-depth examination. Complementing extended literature review with and empirical research to investigate reverse logistics practices influences on firm environmental performance, and incorporating the role of policy in explaining this relationship should make considerable contribution. Besides, the study highlights important areas for future research.

The purpose of this study was to use bridge curvature method (BCM) to quantify stress, while multiscale modeling with adaptive coarsening predicted distortions based on experimentally validated models. Taguchi method and response surface method were used to optimize process parameters (energy density, hatch spacing, scanning speed and beam diameter).

Laser powder bed fusion (LPBF) offers significant design freedom but suffers from residual stresses due to rapid melting and solidification. This study presents a novel approach combining multiscale modeling and statistical optimization to minimize residual stress in SS316L.

Optimal parameters were identified through simulations and validated with experiments, achieving an 8% deviation. This approach significantly reduced printing costs compared to traditional trial-and-error methods. The analysis revealed a non-monotonic relationship between residual stress and energy density, with an initial increase followed by a decrease with increasing hatch spacing and scanning speed (both contributing to lower energy density). Additionally, beam diameter had a minimal impact compared to other energy density parameters.

This work offers a unique framework for optimizing LPBF processes by combining multiscale modeling with statistical techniques. The identified optimal parameters and insights into the individual and combined effects of energy density parameters provide valuable guidance for mitigating residual stress in SS316L, leading to improved part quality and performance.

Workflow optimisation is crucial for establishing a viable acute stroke (AS) intervention programme in a large tertiary care centre. This study aims to utilise Lean Six Sigma (LSS) principles to enhance the hospital's workflow.

The Action Research methodology was used to implement the project and develop the case study. The study took place in a large tertiary care academic hospital in India. The Define-Measure-Analyse-Improve-Control approach optimised the workflow within 6 months. Lean tools such as value stream mapping (VSM), waste audits and Gemba were utilised to identify issues involving various stakeholders in the workflow. Sigma-level calculations were used to compare baseline, improvement and sustainment status. Additionally, statistical techniques were effectively employed to draw meaningful inferences.

LSS tools and techniques can be effectively utilised in large tertiary care hospitals to optimise workflow through a structured approach. Sigma ratings of the processes showed substantial improvement, resulting in a five-fold increase in clinical outcomes. Specifically, there was a 43% improvement in outcome for patients who underwent acute stroke revascularisation. However, certain sigma ratings deteriorated during the control and extended control (sustainment) phases. This indicates that ensuring the sustainability of quality control interventions in healthcare is challenging and requires continuous auditing.

The article presents a single case study deployed in a hospital in India. Thus, the generalisation of outcomes has a significant limitation. Also, the study encounters the challenge of not having a parallel control group, which is a common limitation in quality improvement studies in healthcare. Many studies in healthcare quality improvement, including this one, are limited by minimal data on long-term follow-up and the sustainability of achieved results.

This study pioneers the integration of LSS methodologies in a large Indian tertiary care hospital, specifically targeting AS intervention. It represents the first LSS case study applied in the stroke department of any hospital in India. Whilst most case studies discuss only the positive aspects, this article fills a critical gap by unearthing the challenges of applying LSS in a complex healthcare setting, offering insights into sustainable quality improvement and operational efficiency. This case study contributes to the theoretical understanding of LSS in healthcare. It showcases its real-world impact on patient outcomes and process optimisation.

The manufacturing sector is witnessing the need to continuously improve overall performance by eliminating inefficiencies in the supply chain. The adoption of lean concepts to address wasteful or non-value-adding activities in the supply chain is crucial. This article determines key factors of lean supply chain management (LSCM) for continuous improvement in the manufacturing sector.

The methodology comprises three steps. The first step identifies critical factors of LSCM in manufacturing from prior research and a series of expert consultations. Critical factors are identified and validated that industries can leverage to attain their lean goals. The second step uses the decision-making and trial evaluation laboratory (DEMATEL) method to determine the causal relationship among the factors. DEMATEL analysis categorizes factors into cause and effect, which will assist industry personnel in decision-making. The third step involves further data analysis to visualize the importance of the most critical factors. It develops a machine learning (ML) model in the form of a decision tree that helps in assessing the factors into cause or effect groups via a threshold value of expert ratings.

IT tools, JIT manufacturing and material handling and logistics form the most critical factors for LSCM implementation.

The analysis from DEMATEL and ML together will be beneficial for manufacturing practitioners to improve the supply chain performance based on the identified factors and their criticality towards LSCM implementation.

Theory of Constraints (TOC), though a well-established process improvement methodology in manufacturing, is still a novel philosophy for healthcare and an exhaustive review of literature is needed to summarize the key findings of various researchers. Such a review can provide a direction to the researchers and academicians interested in exploring the application of TOC in the healthcare sector. This paper aims to review the existing literature of TOC tools and techniques applied to the healthcare environment, and to investigate motivating factors, benefits and key gaps for identifying directions for future research in the domain of healthcare.

In this paper, different electronic repositories were searched using multiple keywords. The current study identified 36 articles published between January 1999 to mid-2021 to conceptualize and summarize the research questions used in the study. Descriptive analysis along with pictorial representations have been used for better visualization of work.

This paper presents a thorough literature review of TOC in healthcare and identifies the evolution, current trends, tools used, nature of services chosen for application and research gaps and recommends future direction for research. A variety of motivating factors and benefits of TOC in healthcare are identified. Another key finding of this study is that almost all implementations listed in literature reported positive outcomes and substantial improvements in the performance of the healthcare unit chosen for study.

This paper provides valuable insight to researchers, practitioners and policymakers on the potential of TOC to improve quality of services, flow of patients, revenues, process efficiency and cost reduction in different health care settings. A number of findings and suggestions compiled in the paper from literature study can be used for diagnosing, learning and making substantial changes in healthcare. The methodologies used by different researchers were analysed and combined to propose a generic step by step procedure to apply TOC. This methodology will guide the practising managers about the appropriate tools of TOC for their specific need.

Good health is always the first desire of all men and women around the globe. The global aim of healthcare is to quickly cure more patients and ensure healthier population both today and in future. This article will work as a foundation for future applications of TOC in healthcare and guide upcoming applications in the booming healthcare sector. The paper will help the healthcare managers in serving a greater number of patients with limited available resources.

This paper provides original collaborative work compiled by the authors. Since no comprehensive systematic review of TOC in healthcare has been reported earlier, this study would be a valuable asset for researchers in this field. A model has been presented that links various benefits with one another and clarifies the need to focus on process improvement which naturally results in these benefits. Similarly, a model has been presented to guide the users in implementation of TOC in healthcare.

This study aims to delve into the impact of the Pradhan Mantri Jan Arogya Yojana (PMJAY) on the well-being and quality of life of beneficiaries in Surat City of India. Employing correlation and regression analyses, the study uncovers significant correlations between Awareness, Healthcare Utilisation, and Financial Burden Reduction with well-being outcomes.

The investigation employs a structured questionnaire to gather data from 250 beneficiaries, exploring the relationships between Awareness, Healthcare Utilisation, Financial Burden Reduction, Well-Being and quality of Life. The data was collected using a structured questionnaire using a survey method.

The results highlighted the crucial role of Awareness in empowering beneficiaries to make informed healthcare decisions, positively influencing their well-being. Furthermore, the study underscores how active engagement with PMJAY's healthcare services enhances well-being. The mitigation of financial burdens emerges as a pivotal factor, signifying the program's efficacy in improving beneficiaries' quality of life.

The comprehensive model presented in this study reveals that PMJAY's multifaceted approach is pivotal in promoting enhanced well-being and quality of life among beneficiaries. These findings affect public health policies seeking to create holistic interventions that holistically address vulnerable populations' healthcare access, financial burdens, and overall well-being.

Additive Manufacturing technology (AMT) is swiftly gaining prominence to induce automation and innovation in manufacturing systems. It holds immense potential to change supply chain dynamics by providing the possibility of printing objects on demand. This study thus formulates and analyzes the framework to incorporate AMT to handle the spare parts supply chain management (SPSCM) in capital-intensive industries by identifying and assessing the critical success factors (CSFs).

Assessment of the CSFs is performed using the novel Grey Causal Modeling method (GCM) with the objective of making SPSCM resilient and efficient. GCM conducts causal analysis by taking into consideration cause, effects, the objectives, and the situations.

Findings indicate that; Logistics Lead Time (SD4), Time to manufacture (SD3), Management Support (SD11), and Risk Management (SD20) are the most prominent causal factor having a maximum impact when incorporating AMT in SPSCM. The results also reveal that the performance of manufacturing organizations that adopt AMT is substantially influenced by internal and external factors such as Management Support (SD11) and Government Regulations (SD16).

This research provides valuable information for getting the global spare parts supply chain equipped for the post-COVID age, where digital technologies such as AMT will be fundamental for bolstering supply chain resilience and efficiency.

This research proposes a framework for performance assessment when incorporating AMT in SPSCM. Study also demonstrates methodological application of novel Grey Causal Modelling technique using a real case in a spare parts manufacturing industry in India.