Search results

Compared to the years prior to the COVID-19 pandemic, more workers today seemingly have choice over where, when and how they do their work. However, gender inequalities at work and at home persist, which may impact perceptions of choice. Thus, researchers must investigate the potential impact of gender and domestic responsibilities on perceptions of work-related options, including perceptions of workspace choice.

Using an original dataset with workers in North America, South America, Europe and Asia (N = 3,147), the authors conducted logistic regression analyses to explore whether workers felt they had a choice in where they do their work (workspace choice). In addition to gender, the authors considered the effect of domestic responsibilities (childcare and housework) on worker perceptions of workspace choice.

In the paper's initial regression, the authors found that men (OR: 1.24; 95%CI 1.04–1.48) as well as workers reporting that a partner was responsible for all or most of the housework (OR: 1.80; 95%CI 1.34–2.40) and childcare (OR 1.51; 95%CI 1.09–2.09) reported feeling a greater sense of workspace choice. Simultaneously, follow-up regression analyses found that women and men whose partners had a greater share of domestic responsibility had amplified perceptions of choice. However, surprisingly, men who claimed primary responsibility for domestic work also reported more choice over workspace.

Using an international sample, the authors explore gender inequities in worker perceptions of workspace choice. The authors' findings suggest that domestic responsibilities interact with gender in interesting ways, leading to differences in perceptions of choice in the post-pandemic workplace.

There is limited knowledge of the sustainable halal food supply management in Brunei Darussalam (Brunei), although it is reputable in the halal economy and advocates the United Nations (UN) Sustainable Development Goals (SDGs). Therefore, this paper highlights issues faced in a small, rentier halal market and proposes sustainable supply chain management (SSCM) initiatives for halal-certified food companies in Brunei.

This paper draws data from published academic research and employs a normative and narrative assessment of SSCM and halal supply chain literature.

Four normative SSCM initiatives and propositions that could be implemented by Brunei halal-certified food businesses in achieving the SDGs are highlighted: responsible sourcing, environmental purchasing, sustainable packaging and green transportation.

This viewpoint paper provides a basis for achieving the “Brunei Vision 2035” through a sustainable supply chain lens that may increase well-being and develop a productive and sustainable economy. It also lays a foundation for realising the SDGs, specifically Goal 12 of Sustainable Consumption and Production.

The dedicated attention to smaller halal markets, such as Brunei, would enrich the literature, reveal unforeseen issues or address gaps in the domains of SSCM and halal food supply chains.

The study aims to investigate how personal values (PVS) influence research self-efficacy (RSE) among academics in public universities in Tanzania.

A cross-sectional design was utilized by the study to gather data once through structured questionnaires administered to 247 academic staff from four public universities in Tanzania.

Generally, the results show that PVS positively and significantly influence RSE in universities. Specifically, OPC has β value of 0.284 and p < 0.001, SEFN has β = 0.352 and p < 0.001 and CONS has a β = 0.198 and p = 0.003.

University management should include PVS as among the criteria for recruitment of academic staff, as it determines their confidence in engaging in research.

The findings of this study broaden the applicability of Schwartz human values theory in Tanzania’s universities. Moreover, by carrying out empirical research on the influence of PVS on RSE in developing context such as Tanzania, the study contributes to the body of literature on PVS and RSE.

This paper aims to reflect on the outcomes of a community-based video-conferencing intervention for depression, predating the COVID-19 pandemic. The study investigates the potential implications of its findings for enhancing adherence to digital mental health interventions. The primary objective is to present considerations for researchers aimed at minimising the intention-behaviour gap frequently encountered in digital mental health interventions.

A randomised control feasibility trial design was used to implement a telehealth model adapted from an established face-to-face community-based intervention for individuals clinically diagnosed with depression. In total, 60 participants were initially recruited in association with a local mental health charity offering traditional talking-based therapies with only eight opting to continue through all phases of the project. Modifications aligning with technological advancements were introduced.

However, the study faced challenges, with low uptake observed after an initial surge in recruitment interest. The behaviour-intention gap highlighted technology as a barrier to service accessibility, exacerbated by participant age. Furthermore, the clinical diagnosis of depression, characterised by low mood and reduced interest in activities, emerged as a potential influencing factor.

The limitations of the research include its pre-pandemic execution, during a nascent stage of technological mental health interventions when participants were less familiar with online developments.

Despite these limitations, this study's reflections offer valuable insights for researchers aiming to design and implement telehealth services. Addressing the intention-behaviour gap necessitates a nuanced understanding of participant demographics, diagnosis and technological familiarity.

The study's relevance extends to post-pandemic society, urging researchers to reassess assumptions about technology availability to ensure engagement. This paper contributes to the mental health research landscape by raising awareness of critical considerations in the design and implementation of digital mental health interventions.

Reflections from a pre-pandemic intervention in line with the developments of a post-pandemic society will allow for research to consider that because the technology is available does not necessarily result in engagement.

Automatically extracting stance information from natural language texts is a significant research problem with various applications, particularly after the recent explosion of data on the internet via platforms like social media sites. Stance detection system helps determine whether the author agree, against or has a neutral opinion with the given target. Most of the research in stance detection focuses on the English language, while few research was conducted on the Arabic language.

This paper aimed to address stance detection on Arabic tweets by building and comparing different stance detection models using four transformers, namely: Araelectra, MARBERT, AraBERT and Qarib. Using different weights for these transformers, the authors performed extensive experiments fine-tuning the task of stance detection Arabic tweets with the four different transformers.

The results showed that the AraBERT model learned better than the other three models with a 70% F1 score followed by the Qarib model with a 68% F1 score.

A limitation of this study is the imbalanced dataset and the limited availability of annotated datasets of SD in Arabic.

Provide comprehensive overview of the current resources for stance detection in the literature, including datasets and machine learning methods used. Therefore, the authors examined the models to analyze and comprehend the obtained findings in order to make recommendations for the best performance models for the stance detection task.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

This paper aims to focus on the relationship between female leadership and the environmental, social and governance (ESG) performance of firms. Specifically, the study examines if firms with women as chief executive officers (CEOs) and/or board chairpersons have higher environmental and social scores.

The study uses data on publicly listed Nordic firms in a panel regression approach to establish the relationship between female leadership and the environmental and social performance of firms.

The result of this study shows that women have a leadership characteristic that increases the weighted average of environmental (E) and social (S) performance of a firm. In particular, pillar score results indicate a positive relationship between female CEOs and the social scores of a firm but no relationship between a female board chairperson and the environmental or social scores of a firm. This implies that gender-based differences affect the CEO’s success, especially in a firm’s social performance. Further analyses show a more significant impact on the E and S performance when a woman replaces a man as CEO of a firm.

While prior research has explored various aspects of gender diversity in corporate leadership and its potential impact, the focus on the Nordic context in this study provides a unique perspective, given the region’s distinct business environment and societal factors. In addition, by examining the collective influence of female leaders and both female CEOs and board chairpersons separately, this study provides a nuanced understanding of how different leadership roles may impact a firm’s ESG performance.

The density peak clustering algorithm (DP) is proposed to identify cluster centers by two parameters, i.e. ρ value (local density) and δ value (the distance between a point and another point with a higher ρ value). According to the center-identifying principle of the DP, the potential cluster centers should have a higher ρ value and a higher δ value than other points. However, this principle may limit the DP from identifying some categories with multi-centers or the centers in lower-density regions. In addition, the improper assignment strategy of the DP could cause a wrong assignment result for the non-center points. This paper aims to address the aforementioned issues and improve the clustering performance of the DP.

First, to identify as many potential cluster centers as possible, the authors construct a point-domain by introducing the pinhole imaging strategy to extend the searching range of the potential cluster centers. Second, they design different novel calculation methods for calculating the domain distance, point-domain density and domain similarity. Third, they adopt domain similarity to achieve the domain merging process and optimize the final clustering results.

The experimental results on analyzing 12 synthetic data sets and 12 real-world data sets show that two-stage density peak clustering based on multi-strategy optimization (TMsDP) outperforms the DP and other state-of-the-art algorithms.

The authors propose a novel DP-based clustering method, i.e. TMsDP, and transform the relationship between points into that between domains to ultimately further optimize the clustering performance of the DP.

This study aims to investigate the research question: how do women leaders in the professional business services (PBS) sector develop and approach workplace (in)authenticity?

Ten senior women leaders in the Midlands region of the UK were purposefully selected and interviewed. A semi-structured approach meant that the author adopted a social constructionist paradigm and feminist interpretation. Questions were designed to elicit rich descriptions from the participants. An inductive thematic analysis was conducted to address the study’s purpose.

Four themes were important to women when they developed and approached workplace (in)authenticity: (1) Power Structures, (2) Fit to Belong, (3) Influential Femininity and (4) Through Her Evolution. Women described masculine-majority organisations exerting power. They were pressured into altering their behaviours to “fit” into workplaces. When women had the latitude to be themselves, their leadership excelled. Women’s authenticity developed through increased self-knowledge, helping them to overcome workplace challenges. The study concluded that women face complexities when developing and approaching their constructions of authenticity, namely in the barriers and ramifications they face.

The study suggests several implications for practice and theory concerning enablers and barriers to women leaders' workplace authenticity. The link between authenticity and workplace gender equity needs to be investigated.

The study provides evidence that women are challenged when becoming authentic, therefore, altering their careers irrecoverably in some cases.