Search results

There are few reports that evolutional topology optimization methods are applied to the conductor geometry design problems. This paper aims to propose an evolutional topology optimization method is applied to the conductor design problems of an on-chip inductor model.

This paper presents a topology optimization method for conductor shape designs. This method is based on the normalized Gaussian network-based evolutional on/off topology optimization method and the covariance matrix adaptation evolution strategy. As a target device, an on-chip planer inductor is used, and single- and multi-objective optimization problems are defined. These optimization problems are solved by the proposed method.

Through the single- and multi-objective optimizations of the on-chip inductor, it is shown that the conductor shapes of the inductor can be optimized based on the proposed methods.

The proposed topology optimization method is applicable to the conductor design problems in that the connectivity of the shapes is strongly required.

Industrial simulations of turbulent flows often rely on Reynolds-averaged Navier-Stokes (RANS) turbulence models, which contain numerous closure coefficients that need to be calibrated. This paper aims to address this issue by proposing a semi-automated calibration of these coefficients using a new framework (referred to as turbo-RANS) based on Bayesian optimization.

The authors introduce the generalized error and default coefficient preference (GEDCP) objective function, which can be used with integral, sparse or dense reference data for the purpose of calibrating RANS turbulence closure model coefficients. Then, the authors describe a Bayesian optimization-based algorithm for conducting the calibration of these model coefficients. An in-depth hyperparameter tuning study is conducted to recommend efficient settings for the turbo-RANS optimization procedure.

The authors demonstrate that the performance of the k-ω shear stress transport (SST) and generalized k-ω (GEKO) turbulence models can be efficiently improved via turbo-RANS, for three example cases: predicting the lift coefficient of an airfoil; predicting the velocity and turbulent kinetic energy fields for a separated flow; and, predicting the wall pressure coefficient distribution for flow through a converging-diverging channel.

To the best of the authors’ knowledge, this work is the first to propose and provide an open-source black-box calibration procedure for turbulence model coefficients based on Bayesian optimization. The authors propose a data-flexible objective function for the calibration target. The open-source implementation of the turbo-RANS framework includes OpenFOAM, Ansys Fluent, STAR-CCM+ and solver-agnostic templates for user application.

This paper delves into the aerodynamic optimization of a single-stage axial turbine employed in aero-engines.

An efficient integrated design optimization approach tailored for turbine blade profiles is proposed. The approach combines a novel hierarchical dynamic switching PSO (HDSPSO) algorithm with a parametric modeling technique of turbine blades and high-fidelity Computational Fluid Dynamics (CFD) simulation analysis. The proposed HDSPSO algorithm introduces significant enhancements to the original PSO in three pivotal aspects: adaptive acceleration coefficients, distance-based dynamic neighborhood, and a switchable learning mechanism. The core idea behind these improvements is to incorporate the evolutionary state, strengthen interactions within the swarm, enrich update strategies for particles, and effectively prevent premature convergence while enhancing global search capability.

Mathematical experiments are conducted to compare the performance of HDSPSO with three other representative PSO variants. The results demonstrate that HDSPSO is a competitive intelligent algorithm with significant global search capabilities and rapid convergence speed. Subsequently, the HDSPSO-based integrated design optimization approach is applied to optimize the turbine blade profiles. The optimized turbine blades have a more uniform thickness distribution, an enhanced loading distribution, and a better flow condition. Importantly, these optimizations lead to a remarkable improvement in aerodynamic performance under both design and non-design working conditions.

These findings highlight the effectiveness and advancement of the HDSPSO-based integrated design optimization approach for turbine blade profiles in enhancing the overall aerodynamic performance. Furthermore, it confirms the great prospects of the innovative HDSPSO algorithm in tackling challenging tasks in practical engineering applications.

The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters.

After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated.

The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes.

The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged.

This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments.

Lattice structures are widely used for achieving optimal topology in additive manufacturing. However, the use of different lattices in a single design can result in stress concentrations at the transition points. This study aims to investigate the influence of Bezier curves on mechanical properties during the transformation from one lattice structure to another. It specifically focuses on the transition from a hexagonal to diamond lattice, using Bezier curves of various orders.

The curves were designed by passing them through the same control points for different orders, such as third, fifth and seventh. The samples were sliced for 3D printing, and a tensile test was conducted. Young’s modulus and energy absorption abilities were measured to compare the mechanical properties of the models created with Bezier curves for the transformation between hexagonal and diamond models.

The analysis revealed a gradual change in mechanical properties from the hexagonal to the diamond lattice. Moreover, different orders of Bezier curves exhibited varying mechanical properties during the transformation between the two lattices. As the order of the Bezier curve increased, the mechanical properties smoothly changed from the hexagonal to diamond lattice. This prevented stress concentrations or mechanical behavior mismatch caused by sudden deformations at the transitions between the curves used in the design.

The study’s innovative use of Bezier curves of different orders to smoothly transformation between hexagonal and diamond lattices in additive manufacturing offers a practical solution to prevent stress concentrations and mechanical inconsistencies during such design transitions.

While performance demands in the natural world are varied, graded lattice structures reveal distinctive mechanical properties with tremendous engineering application potential. For biomechanical functions where mechanical qualities are required from supporting under external loading and permeability is crucial which affects bone tissue engineering, the geometric design in lattice structure for bone scaffolds in loading-bearing applications is necessary. However, when tweaking structural traits, these two factors frequently clash. For graded lattice structures, this study aims to develop a design-optimization strategy to attain improved attributes across different domains.

To handle diverse stress states, parametric modeling is used to produce strut-based lattice structures with spatially varied densities. The tailored initial gradients in lattice structure are subject to automatic property evaluation procedure that hinges on finite element method and computational fluid dynamics simulations. The geometric parameters of lattice structures with numerous objectives are then optimized using an iterative optimization process based on a non-dominated genetic algorithm.

The initial stress-based design of graded lattice structure with spatially variable densities is generated based on the stress conditions. The results from subsequent dual-objective optimization show a series of topologies with gradually improved trade-offs between mechanical properties and permeability.

In this study, a novel structural design-optimization methodology is proposed for mathematically optimizing strut-based graded lattice structures to achieve enhanced performance in multiple domains.

The purpose of this paper is mainly to develop the adjoint method within the method of magnetic moment (MMM) and thus, to provide an efficient new way to solve topology optimization problems in magnetostatic to design 3D-magnetic circuits.

First, the MMM is recalled and the optimization design problem is reformulated as a partial derivative equation-constrained optimization problem where the constraint is the Maxwell equation in magnetostatic. From the Karush–Khun–Tucker optimality conditions, a new problem is derived which depends on a Lagrangian parameter. This problem is called the adjoint problem and the Lagrangian parameter is called the adjoint parameter. Thus, solving the direct and the adjoint problems, the values of the objective function as well as its gradient can be efficiently obtained. To obtain a topology optimization code, a semi isotropic material with penalization (SIMP) relaxed-penalization approach associated with an optimization based on gradient descent steps has been developed and used.

In this paper, the authors provide theoretical results which make it possible to compute the gradient via the continuous adjoint of the MMMs. A code was developed and it was validated by comparing it with a finite difference method. Thus, a topology optimization code associating this adjoint based gradient computations and SIMP penalization technique was developed and its efficiency was shown by solving a 3D design problem in magnetostatic.

This research is limited to the design of systems in magnetostatic using the linearity of the materials. The simple examples, the authors provided, are just done to validate our theoretical results and some extensions of our topology optimization code have to be done to solve more interesting design cases.

The problem of design is a 3D magnetic circuit. The 2D optimization problems are well known and several methods of resolution have been introduced, but rare are the problems using the adjoint method in 3D. Moreover, the association with the MMMs has never been treated yet. The authors show in this paper that this association could provide gains in CPU time.

The paper starts from an observation of a discrepancy between the ambitions for sustainable change in the agro-industry and the actual changes being implemented. We offer one possible explanation by investigating the organizational structures conditioning change in this industry.

We apply a case study methodology, focusing on the Danish pig industry and its organizational conditions for change. Based on interviews and document analysis, and building on systems theory, we develop the concept of change structures, understood as decision premises that guide the change of further decision premises.

The analysis suggests that the pig industry’s change structures predominantly enable changes that cut costs and optimize the production, which may conflict with and possibly foreclose the changes needed to realize the industry’s sustainable ambitions. This conflict and its implications are not acknowledged by the industry.

The analysis indicates that the industry may be locked in its current form of organizational change. We suggest a way to overcome the lock-in by fostering organizational mechanisms that enable alternative interpretations to emerge internally. Without this, achieving the required sustainable change in the industry may hinge on stronger external regulation and support.

Conceptually, the notion of change structures supplements actor-oriented analytical approaches that focus on change agents and sense-making. Empirically, we contribute with an analysis of the conditions of possibility for sustainable change in an important yet understudied industry in organization studies; namely, the conventional agro-industry.

In this study, the authors propose a novel digital twinning approach specifically designed for controlling transient thermal systems. The purpose of this study is to harness the combined power of deep learning (DL) and physics-based methods (PBM) to create an active virtual replica of the physical system.

To achieve this goal, we introduce a deep neural network (DNN) as the digital twin and a Finite Element (FE) model as the physical system. This integrated approach is used to address the challenges of controlling an unsteady heat transfer problem with an integrated feedback loop.

The results of our study demonstrate the effectiveness of the proposed digital twinning approach in regulating the maximum temperature within the system under varying and unsteady heat flux conditions. The DNN, trained on stationary data, plays a crucial role in determining the heat transfer coefficients necessary to maintain temperatures below a defined threshold value, such as the material’s melting point. The system is successfully controlled in 1D, 2D and 3D case studies. However, careful evaluations should be conducted if such a training approach, based on steady-state data, is applied to completely different transient heat transfer problems.

The present work represents one of the first examples of a comprehensive digital twinning approach to transient thermal systems, driven by data. One of the noteworthy features of this approach is its robustness. Adopting a training based on dimensionless data, the approach can seamlessly accommodate changes in thermal capacity and thermal conductivity without the need for retraining.

This study investigated two key aspects: (1) how a hospital bundles limited resources for preventive care performance and (2) how to develop IS capabilities to enhance preventive care performance.

A case study method was adopted to examine how a hospital integrates its limited resources which leads to the need for resource bundles and an understanding of IS capabilities development to understand how they contribute to the delivery of preventive care in a Malaysian hospital.

This research proposes a comprehensive framework outlining resource-bundling and IS capabilities development to improve preventive care.

We acknowledge that the problem of transferring and generalizing results has been a common criticism of a single case study. However, our objective was to enhance the reader’s understanding by including compelling, detailed narratives demonstrating how our research results offer practical examples that can be generalized theoretically. The findings also apply to similar-sized public hospitals in Malaysia and other developing countries, facing challenges like resource constraints, HIS adoption levels, healthcare workforce shortages, cultural and linguistic diversity, bureaucratic hurdles, and specific patient demographics and health issues. Further, lessons from this context can be usefully applied to non-healthcare service sector domains.

This study provides a succinct strategy for enhancing preventive care in Malaysian public hospitals, focusing on system integration and alignment with hospital strategy, workforce diversity through recruitment and mentorship, and continuous training for health equity and inclusivity. This approach aims to improve resource efficiency, communication, cultural competence, and healthcare outcomes.

Efficiently using limited resources through HIS investment is essential to improve preventive care and reduce chronic diseases, which cause approximately nine million deaths annually in Southeast Asia, according to WHO. This issue has significantly impacted the socioeconomic development of developing countries.

This research refines resource orchestration theory with new mechanisms for resource mobilization, extends IS literature by identifying how strategic bundling forms specialized healthcare IS capabilities, enriches preventive care literature through actionable resource-bundling activities, and adds to HIS literature by advocating for an integrated, preventive care focus from the alignment of HIS design, people and institutional policies to address concerns raised by other research regarding the utilization of HIS in improving the quality of preventive care.