Search results

This paper aims to develop an indigo-dyed denim fabric treated with a nanosilver colloid in the presence of a natural crosslinker of citric acid for possible surgical gown fabrication applications.

A bleached denim fabric was dyed with the sustainable indigo dye followed by silver nanofinishing through citric acid crosslinking under the pad-dry-cure method. The prepared denim samples were analyzed for chemo-physical, textile, dyeing, antibacterial and finish release properties.

The results demonstrated that the comfort and textile characteristics of nanosilver-treated/indigo-dyed cellulosic fabric were affected due to the crosslinking, surface amphiphilicity and air permeability. These properties were, still, in the acceptable range for the fabrication of naturally dyed and antibacterial nanofinished denim gowns.

The dyeing of denim with synthetic dyes may cause harmful effects on the skin and health of the wearer, and the authors present an eco-friendly sustainable approach.

The authors used the fabric substrate, natural indigo dye and reducing/crosslinker agent of citric acid, all being bio-based, in the fabrication of antibacterial dyed fabric for health care garments.

A review of sustainability challenges of flame retardants (FRs) for textiles has been conducted. Specifically, the purpose of this paper is to identify and recommend solutions to sustainability challenges emanating from the raw material, processing technology and performance of the FRs used for textiles.

The approach used in preparing this paper was based on the review of various scholarly databases about the subject matter. The review approach is designed to inform the readers about the sustainability challenges of FRs for textiles. The science of burning and FRs for synthetic and cellulosic fibres were reviewed. Both synthetic and natural biodegradable FRs for textiles has been identified. The obtained literature was then synthesised to get information about sustainable challenges of non-halogenated FRs both synthetic and natural biodegradable. Finally, possible approaches for mitigating the identified challenges have been recommended.

The sustainability challenges of the FRs in terms of raw material, processing, affordability and performance have been identified. Synthetic FRs suffer from sustainability challenges in terms of raw materials, processing and non-renewability. Despite the environmental friendliness and sustainability in terms of being renewability, processability and biodegradability, natural biodegradable FRs have poor performance compared to synthetic ones. Moreover, natural biodegradable FRs depend on geographical condition and lack economic variability data. Potentially, the challenges of FRs can be mitigated through eco-friendly synthesis, chemical modification and sustainable methods of applications. Because of its renewability and environmental friendliness, biodegradable FRs have a potential to becoming sustainable if researched more.

In this review, a collection of literature about sustainability challenges of FRs and the approaches to overcome the challenges has been provided. The collected information was analysed and synthesised to bring understanding of the science of burning, types and application of FRs for textiles and biodegradable FRs. Sustainability challenges have been identified, and mitigation approaches are provided.

The purpose of this study is to detect the effect of some natural cellulosic polymers in their nano forms with the addition of zinc oxide nanoparticles on restoring the lost mechanical strength of degraded papyrus without any harmful effects on the inks.

In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging.

In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging.

The effect of strengthening materials was studied on cellulose and carbon ink, which makes this study closer to reality as the manuscript is the consistent structure of cellulose and inks, whereas most of the literature stated the impact of consolidation materials on the strengthening the cellulosic supports without attention to their impact on inks.

Present study aimed to nanosilver-treat some commercially dyed denim fabric using an eco-friendly cross-linker of citric acid for possible application in the fabrication of sustainable antibacterial and nontoxic surgical gowns.

The conventional untreated surgical gowns are prone to bacterial attack making them unprotective and infection carriers. Thereby, nanosilver finishing of the surgical-grade dyed denim fabric was achieved via citrate cross-linking under the pad-dry-cure method. The hence treated denim fabrics were characterized for surface chemical, crystalline, textile, color and antibacterial attributes using both conventional and advanced analytical approaches.

The results expressed that the prepared denim specimens contained surface roughness at the nanoscale besides some alterations in their textile and color parameters. Both textile and comfort properties of the finished fabric remained in the acceptable range with effective antibacterial activity.

The silver nano-finished dyed denim expressed broad-spectrum antibacterial activity and qualified as a potential substrate in the fabrication of surgical gowns. Such sustainable application of nanosilver finishing could be perused for industrial implications.

This study presents citric acid as a crosslinking agent to impregnate the commercially dyed denim fabric for potential application in the fabrication of surgical gowns. The application of nanosilver on prior citrated dyed-grown fabrics could be a novel approach. This study used approximately all the reagents and auxiliaries as bio-based to ensure the nontoxicity and sustainability of the resultant fabric.

The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton fabric to improve its properties or to add some functional properties. The paper presented mostly studied research works that brought a significant surface improvement on cotton fabric.

Different previous works on surface modifications of cotton fabrics such as pilling, wrinkle and microbial resistance, hydrophobicity, cationization, flame retardancy and UV-protection characteristics were studied and their methods of modification including the main findings are well reported in this paper.

Several modification treatments on surface modification of cotton fabrics indicated an improvement in the desired properties in which the modification is needed. For instance, the pilling tendency, wrinkling, microbial degradation and UV degradation drawbacks of cotton fabric can be overcome through different modification techniques.

To the best of the author’s knowledge, there are no compressive documents that covered all the portions presented in this review. The author tried to cover the surface modifications done to improve the main properties of cotton fabric.

The purpose of this study was to assess the repercussions of eucalyptus bark and tea leaf extract as natural dyes and antibacterial agents for jute–cotton union fabric.

The dye was collected from the eucalyptus tree’s bark and tea leaves by the aqueous extraction method. The fabric was dyed with potassium alum mordant, using pre-mordanting, post-mordanting and meta-mordanting methods. Examine the color performance analyzed the K/S, L*, a*, b*; fastness to washing using standard test method ISO 105 C06 A2S, rubbing fastness was performed by Crock meter using AATCC 115. The dyed fabrics were characterized by Fourier transform infrared radiation for the existence of various functional groups. Also, antimicrobial activity testing was done by the agar diffusion method (AATCC method SN 195 920) where Escherichia coli and Staphylococcus aureus were used.

The extracted dye tea leaves meta-mordant dyed samples were determined to have the strongest relative color. Fabrics pre-mordanted and post-mordanted with extracted eucalyptus and extracted tea dye produced the same outcome, which was excellent for wash fastness to staining and very good for wash fastness to fading. For both eucalyptus bark and tea, rubbing fastness on the pre-mordanted fabric produced very positive results. In mordanted colored fabric, significant antibacterial activity was discovered against S. aureus and E. coli.

This study demonstrates that the eucalyptus bark and tea leaves extract encompasses a solid antimicrobial action with amazing coloring execution for jute–cotton union fabric.

This paper aims to produce sustainable sport-hijab or veiling using cotton and bamboo as renewable and eco-material blending with polyester. Due to the unique characteristics of the knitting fabrics, the research focused on constructing the proposed samples using a circular knitting technique with a French terry structure, to achieve comfort, ease of care, good appearance and sustainability in different climatic conditions.

The researchers formed three different knitted samples using yarn count 30/1Ne for cotton and bamboo and 70 dens for polyester yarn, using the same blending ratio of 50:50% (cotton/polyester, bamboo/ polyester and cotton/ bamboo). They tested several mechanical and physical properties (weight, thickness, air permeability, water permeability, electrostatic charges, ultraviolet protection factor, stiffness, pilling resistance and bursting strength).

Using different tools, the researchers statistically analyzed the influence of variables on sample properties, including a Chart line, ANOVA test at p-value = 0.05 and the least significant differences values to identify the effect significantly as well as demonstrate the interaction among the samples at each tested property. Finally, radar chart areas to clarify the preferable sample performance.

The findings declared that blending materials used significantly affected most properties of the produced samples, except for the water permeability and an electrostatic charge. Furthermore, the findings pointed out that blending (cotton or bamboo/polyester) is more efficient and desirable than blending (cotton/ bamboo). Additionally, based on radar charts analysis, the cotton/polyester knitted outperforms other blended materials samples in producing sport-hijab or veiling fabric.

This study aims to present a sustainable approach in the natural dyeing of cellulose fabric followed by nanosilver finishing through a green crosslinker of citric acid for potential antibacterial surgical gown fabrication.

The nanosilver finish was reproduced using the chemical reduction method. The fabric dyeing was performed on a lab-scale dyeing machine, whereas silver nano-finishing through a pad-dry-cure approach. Citric acid was used as an eco-friendly crosslinker. The specimens were characterized for antibacterial activity, surface chemical, textile, color properties and finish release trend.

The results demonstrated the successful application of curcumin dye followed by silver nano-finishing. The resultant fabric exhibited appropriate textile, dyeing performance indicators, hydrophobic behavior and sustainable broad-spectrum antibacterial activity.

The prepared nanosilver-finished/curcumin-treated fabric expressed desirable properties for potential applications in the fabrication of surgical gowns.

The authors found no reports on an extensive examination of nanosilver finishing on the color parameters of curcumin-dyed cellulose fabric while retaining its textile and comfort properties for possible surgical gown fabrication.

Dehydrated bacterial cellulose’s (BC) intrinsic rigidity constrains applicability across textiles, leather, health care and other sectors. This study aims to yield a novel BC modification method using glycerol and succinic acid with catalyst and heat, applied via an industrially scalable padding method to tackle BC’s stiffness drawbacks and enhance BC properties.

Fabric-like BC is generated via mechanical dehydration and then finished by using padding method with glycerol, succinic acid, catalyst and heat. Comprehensive material characterizations, including international testing standards for stiffness, bending properties (cantilever method), tensile properties, moisture vapor transmission rate, moisture content and regain, washing, thermal gravimetric analysis, derivative thermogravimetry, Fourier-transform infrared spectroscopy and colorimetric measurement, are used.

The combination of BC/glycerol/succinic acid dramatically enhanced porous structure, elongation (27.40 ± 6.39%), flexibility (flexural rigidity of 21.46 ± 4.01 µN m; bending modulus of 97.45 ± 18.20 MPa) and moisture management (moisture vapor transmission rate of 961.07 ± 86.16 g/m²/24 h; moisture content of 27.43 ± 2.50%; and moisture regain of 37.94 ± 4.73%). This softening process modified the thermal stability of BC. Besides, this study alleviated the drawbacks for washing (five cycles) of BC and glycerol caused by the ineffective affinity between glycerol and cellulose by adding succinic acid with catalyst and heat.

The study yields an effective padding process for BC softening and a unique modified BC to contribute added value to textile and leather industries as a sustainable alternative to existing materials and a premise for future research on BC functionalization by using doable technologies in mass production as padding.

The purpose of this study is to undertake surface graft copolymerization of viscose fabric via altering its fibrous properties by using acrylic acid (AA) as a carboxyl-containing monomer and peroxydisulfate (PDS) in presence of ferrous sulfate as a novel redox pair for initiating grafting. The latter process acted as an energy-saving process with respect to the reduction in polymerization temperature and maximizing the graft yield %, in addition to rendering the grafted viscose fabrics dye-able with cationic dye (crystal violet), which has frequently no direct affinity to fix on fabric.

To make graft copolymerization more efficient and economic, the optimum conditions for graft copolymerization were established. The graft yield % was determined as a function of initiator, catalyst and monomer concentrations and the material to liquor ratio, in addition to polymerization time and temperatures. Metrological characterizations via Fourier transform infrared spectroscopy and scanning electron microscopy of topographic morphological surface change have also been established in comparison with the ungrafted samples.

The maximum graft yield of 70.6% is obtained at the following optimum conditions: monomer (150 % based on the weight of fabric), PDS (50 m mole), ferrous sulfate (80 m mole) and sulfuric acid (30 m mole) at 40° C for 1.5 h using a liquor ratio of 30. Remarkably, grafting with AA enabled a multifold upsurge in color strength, with improvements in the fastness properties of cationically dyed grafted viscose fabric measured on the blue scale in comparison with untreated viscose fabric.

The novelty addressed here is undertaken with studying the effect of altering the extent of grafting of poly (AA)-viscose graft copolymers expressed as graft yield % in addition to carboxyl contents on cationic dyeing of viscose fabric for the first time in the literature. Moreover, rendering the viscose fabrics after grafting is dye-able with cationic dye with high brilliance of shades, which has regularly no direct affinity to fix on this type of fabrics.