Search results

The utilisation of food waste/by‐products helps to increase produce recovery and enhances nutrition in low‐cost food without any appreciable increase in product cost. The storage behaviour of the product must be studied before commercialisation of the product. This paper aims to focus on this process.

Extrudates (25 g) prepared under optimised conditions of proportion (rice flour, pulse powder and carrot pomace), moisture content, screw speed and die temperature, were sealed using a polythene sealing machine in LDPE bags and aluminium laminated LDPE bags. The bags were then stored for six months in an incubator at temperature of 38±2°C to evaluate the stability of the product. The extrudates were analysed for change in colour, hardness, moisture content and sensory characteristics.

Zero‐ and first‐order models were fitted for prediction purposes. The minimum overall change in color ΔE value, minimum increase in moisture content and minimum increase in hardness was observed in aluminium laminated LDPE bags. The zero order model better predicted the variation of L*, b*, ΔE, moisture content and hardness during storage, whereas first order model was better fitted for the a* value.

The carrot pomace has the potential to be used as a food ingredient that enhances the nutritional attributes of products along with a reduction in cost. Extruded products were successfully developed in the laboratory using carrot pomace as one of the ingredients. This study evaluates the kinetic changes during the storage of carrot pomace based extruded snacks.

This paper aims to discuss the successful 3D printing of styrene–ethylene–butylene–styrene (SEBS) block copolymers using solvent-cast 3D printing (SC-3DP) technique.

Three different Kraton grade SEBS block copolymers were used to prepare viscous polymer solutions (ink) in three different solvents, namely, toluene, cyclopentane and tetrahydrofuran. Hansen solubility parameters (HSPs) were taken into account to understand the solvent–polymer interactions. Ultraviolet–visible spectroscopy was used to analyze transmittance behavior of different inks. Printability of ink samples was compared in terms of shape retention capability, solvent evaporation and shear viscosity. Dimensional deviations in 3D-printed parts were evaluated in terms of percentage shrinkage. Surface morphology of 3D-printed parts was investigated by scanning electron microscope. In addition, mechanical properties and rheology of the SC-3D-printed SEBS samples were also investigated.

HSP analysis revealed toluene to be the most suitable solvent for SC-3DP. Cyclopentane showed a strong preferential solubility toward the ethylene–butylene block. Microscopic surface cracks were present on tetrahydrofuran ink-based 3D-printed samples. SC-3D-printed samples exhibited high elongation at break (up to 2,200%) and low tension set (up to 9%).

SC-3DP proves to be an effective fabrication route for complex SEBS parts overcoming the challenges associated with fused deposition modeling.

To the best of authors’ knowledge, this is the first report investigating the effect of different solvents on physicomechanical properties of SC-3D-printed SEBS block copolymer samples.

Friction stir processing (FSP) is overviewed with the process variables, along with the thermal aspect of different metals.

With its inbuilt advantages, FSP is used to reduce the failure in the structural integrity of the body panels of automobiles, airplanes and lashing rails. FSP has excellent process ability and surface treatability with good corrosion resistance and high strength at elevated temperatures. Process parameters such as rotation speed of the tool, traverse speed, tool tilt angle, groove design, volume fraction and increase in number of tool passes should be considered for generating a processed and defect-free surface of the workpiece.

FSP process is used for modifying the surface by reinforcement of composites to improve the mechanical properties and results in the ultrafine grain refinement of microstructure. FSP uses the frictional heat and mechanical deformation for achieving the maximum performance using the low-cost tool; the production time is also very less.

100

The purpose of this paper is to assess the role of institutions dealing with disaster risk in Delhi and propose possible solutions for disaster risk reduction.

The approach to assess the role of institutions is based on the Climate Disaster Resilience Index (CDRI) questionnaire survey. It evaluates roles based on variables such as mainstreaming of disaster risk reduction and climate change adaptation, effectiveness of crisis management framework, knowledge dissemination and management, institutional collaboration with other stakeholders, and good governance.

The findings show the institution's limitations and strengths to face hydro‐meteorological disaster risk in Delhi. It further identifies possible areas for disaster risk reduction.

The methodology is new and it only incorporates disasters that are hydro‐meteorological. The study does not include man‐made, geological, and biological disasters.

The paper is unique in its approach to identify gaps in the current approach in managing disaster risk in Delhi and puts forward the possible ways to deal with disaster risk. Moreover, very few studies have been done in this area.

The authors intend to assess the village health sanitation and nutrition committees (VHSNC) on six parameters, including their formation, composition, meeting frequencies, activities, supervisory mechanisms and funds receipt and expenditures across nine districts of the three states of India.

The cross-sectional study, conducted in the states of Uttar Pradesh (five districts), Odisha (two districts) and Rajasthan (two districts), used a quantitative research design. The community health workers of 140 VHSNCs were interviewed using a semi-structured questionnaire. The details about the funds' receipt and expenditures were verified from the VHSNC records (cashbook). Additionally, the authors asked about the role of health workers in the VHSNC meetings, and the issues and challenges faced.

The average number of members in VHSNCs varied from 10 in Odisha to 15 in Rajasthan. Activities were regularly organized in Rajasthan and Odisha (one per month) compared to Uttar Pradesh (one every alternate month). Most commonly, health promotion activities, cleanliness drives, community monitoring and facilitation of service providers were done by VHSNCs. Funds were received regularly in Odisha compared to Rajasthan and Uttar Pradesh. Funds were received late and less compared to the demands or needs of VHSNCs.

This comprehensive analysis of VHSNCs' functioning in the selected study areas sheds light on the gaps in many components, including the untimely and inadequate receipt of funds, poor documentation of expenditures and involvement of VHSNC heads and inadequate supportive supervision.

VHSNCs assessment has been done for improving community health governance.

The goal of this research is to analyse the obstacles to the implementation of mobile health (mHealth) in India and to gain an understanding of the contextual inter-relationships that exist amongst those obstacles.

Potential barriers and their interrelationships in their respective contexts have been uncovered. Using MICMAC analysis, the categorization of these barriers was done based on their degree of reliance and driving power (DP). Furthermore, an interpretive structural modeling (ISM) framework for the barriers to mHealth activities in India has been proposed.

The study explores a total of 15 factors that reduce the efficiency of mHealth adoption in India. The findings of the Matrix Cross-Reference Multiplication Applied to a Classification (MICMAC) investigation show that the economic situation of the government, concerns regarding the safety of intellectual technologies and privacy issues are the primary obstacles because of the significant driving power they have in mHealth applications.

Promoters of mHealth practices may be able to make better plans if they understand the social barriers and how they affect each other; this leads to easier adoption of these practices. The findings of this study might be helpful for governments of developing nations to produce standards relating to the deployment of mHealth; this will increase the efficiency with which it is adopted.

At this time, there is no comprehensive analysis of the factors that influence the adoption of mobile health care with social cognitive theory in developing nations like India. In addition, there is a lack of research in investigating how each of these elements affects the success of mHealth activities and how the others interact with them. Because developed nations learnt the value of mHealth practices during the recent pandemic, this study, by investigating the obstacles to the adoption of mHealth and their inter-relationships, makes an important addition to both theory and practice.

The purpose of this paper is not only to gauge the extent of technical efficiency in 31 state road transport undertakings (SRTUs) operating in India but also to explore the most influential factors explaining its variations across SRTUs.

Three popular data envelopment analysis (DEA) models, namely CCR, BCC and Andersen and Petersen's super‐efficiency models, have been utilized to compute various efficiency scores for individual SRTUs. A censored Tobit analysis is conducted to see which factors significantly explain the inter‐SRTU variations in efficiency.

The key findings of the DEA analysis are only five SRTUs define the efficient frontier, and the remaining 26 inefficient undertakings have a scope of inputs reduction, albeit by the different magnitude; the extent of average overall technical inefficiency (OTIE) in these SRTUs is to the tune of 22.8 percent, indicating that the sample SRTUs are wasting about one‐fourth of their resources in the production operations; managerial inefficiency (as captured by the pure technical inefficiency) is a relatively more dominant source of OTIE; and operation in the zone of increasing returns‐to‐scale is a common feature for most of the undertakings. The multivariate regression analysis using Tobit analysis highlights that the occupancy ratio is the most significant determinant for all the efficiency measures, and bears a positive relationship with overall technical, pure technical and scale efficiencies. Further, scale efficiency is also impacted positively by the staff productivity.

The results of this paper can be applied from management's perspective. The managers can assess the relative efficiency of their SRTUs in the industry and take corrective measures to improve efficiency by altering input‐output mix.

This paper provides more robust estimates of relative efficiency of the SRTUs and highlights the key determinants of overall technical efficiency.

The purpose of this paper is to explore the mediating role of organisational harmony and fellow-feelings in the relationship between intelligence generations, dissemination and implementation on business performance and explain how market orientation impacts certain aspects of organisational behaviour which in turn lead to the performance of service firms.

The data set comprises 108 responses of senior managers within the logistics sector. The multi-level sequential mediation path analysis is used to examine the above mediating role.

Results indicate that intelligence dissemination (ID), response implementation (RI) and business performance relationship is significantly mediated via fellow-feelings and organisational harmony. However, the relationship between dissemination, implementation and overall business performance is mostly mediated by fellow-feelings and followed by organisational harmony. Furthermore, when overall market orientation (intelligence generation, dissemination and RI) is used as a determinant of business performance, organsiational harmony emerged as the most significant contributor to organsiational performance.

Managers are urged to focus on building fellow-feelings among their employees, resulting in a harmonious work environment between functional units and market orientation organisation wide.

Compared to previous research, this is one of the first attempts to develop an understanding of fellow-feelings, contributing to organsiational harmony resulting market orientation and, hence, business performance. Market orientation conceptualisations lump intelligence generation, dissemination and RI of business activities together but do not explain how market orientation impacts fellow-feelings and organisational harmony which in turn leads to performance. The authors specifically address this important lacuna in our conceptualisation and propose that ID and RI lead to fellow-feelings within functional departments and results in organisational harmony.

Managing risks is becoming a highly focused activity in the health service sector. In particular, due to the complex nature of processes in the pharmaceutical industry, several risks have been associated to its supply chains. The purpose of this paper is to identify and analyze the risks occurring in the supply chains of the pharmaceutical industry and propose a decision model, based on the Analytical Hierarchy Process (AHP) method, for evaluating risks in pharmaceutical supply chains (PSCs).

The proposed model was developed based on the Delphi method and AHP techniques. The Delphi method helped to select the relevant risks associated to PSCs. A total of 16 sub risks within four main risks were identified through an extensive review of the literature and by conducting a further investigation with experts from five pharmaceutical companies in Bangladesh. AHP contributed to the analysis of the risks and determination of their priorities.

The results of the study indicated that supply-related risks such as fluctuation in imports arrival, lack of information sharing, key supplier failure and non-availability of materials should be prioritized over operational, financial and demand-related risks.

This work is one of the initial contributions in the literature that focused on identifying and evaluating PSC risks in the context of Bangladesh. This research work can assist practitioners and industrial managers in the pharmaceutical industry in taking proactive action to minimize its supply chain risks. To the end, the authors performed a sensitivity analysis test, which gives an understanding of the stability of ranking of risks.

Developed countries agreed at COP15 to pay US$100bn annually for adaptation and mitigation in developing countries. This paper aims to evaluate how prepared are donors and recipients to spend this money well by analyzing institutional and organizational capabilities for climate change adaptation in least developed country (LDC) administrations using the case of Nepal, a country which can be considered to be an archetypal LDC.

The authors conducted over 100 in-depth structured qualitative interviews with government officials from across the organizational chain in the ministries concerned with climate change, ranging from the lowest-ranked employee to just under the ministerial ranks. This was supplemented with detailed surveys of three representative communities from different ecological zones in Nepal. Data were analyzed using Ostrom’s IAD framework.

Local administrations are more motivated and capable than are given credit for by donors but nevertheless face critical barriers in being able to function autonomously and confront climate change challenges. These barriers create three interrelated challenges: An organizational challenge to create intrinsic incentives which empower and grant autonomy to front line agents, an institutional challenge to go beyond accountability-focused process validation and a policy-choice challenge which avoids the temptation to write aspirational policies without clear and feasible strategies to obtain the resources necessary for their implementation.

The findings point to ways climate assistance can be restructured for more reach and effectiveness.

This paper fills a gap in the literature because community structures and institutions have been extensively analyzed in the context of adaptation, but despite being criticized, administrative structures have rarely been directly studied.