Search results

A matrix is a Q0-matrix if for every k∈{1,2,…,n}, the sum of all k×k principal minors is nonnegative. In this paper, we study some necessary and sufficient conditions for a digraph to have Q0-completion. Later on we discuss the relationship between Q and Q0-matrix completion problem. Finally, a classification of the digraphs of order up to four is done based on Q0-completion.

The missing travel time data for roads is a common problem encountered by traffic management departments. Tensor decomposition, as one of the most widely used method for completing missing traffic data, plays a significant role in the intelligent transportation system (ITS). However, existing methods of tensor decomposition focus on the global data structure, resulting in relatively low accuracy in fibrosis missing scenarios. Therefore, this paper aims to propose a novel tensor decomposition model which further considers the local spatiotemporal similarity for fibrosis missing to improve travel time completion accuracy.

The proposed model can aggregate road sections with similar physical attributes by spatial clustering, and then it calculates the temporal association of road sections by the dynamic longest common subsequence. A similarity relationship matrix in the temporal dimension is constructed and incorporated into the tensor completion model, which can enhance the local spatiotemporal relationship of the missing parts of the fibrosis type.

The experiment shows that this method is superior and robust. Compared with other baseline models, this method has the smallest error and maintains good completion results despite high missing rates.

This model has higher accuracy for the fibrosis missing and performs good convergence effects in the case of the high missing rate.

Wireless sensor networks (WSNs) are periodically collecting data through randomly dispersed sensors (motes), which typically consume high energy in radio communication that mainly leans on data transmission within the network. Furthermore, dissemination mode in WSN usually produces noisy values, incorrect measurements or missing information that affect the behaviour of WSN. In this article, a Distributed Data Predictive Model (DDPM) was proposed to extend the network lifetime by decreasing the consumption in the energy of sensor nodes. It was built upon a distributive clustering model for predicting dissemination-faults in WSN. The proposed model was developed using Recursive least squares (RLS) adaptive filter integrated with a Finite Impulse Response (FIR) filter, for removing unwanted reflections and noise accompanying of the transferred signals among the sensors, aiming to minimize the size of transferred data for providing energy efficient. The experimental results demonstrated that DDPM reduced the rate of data transmission to ∼20%. Also, it decreased the energy consumption to 95% throughout the dataset sample and upgraded the performance of the sensory network by about 19.5%. Thus, it prolonged the lifetime of the network.

This paper aims to make it convenient for those who have only just begun their research into Community Question Answering (CQA) expert recommendation, and for those who are already concerned with this issue, to ease the extension of our understanding with future research.

In this paper, keywords such as “CQA”, “Social Question Answering”, “expert recommendation”, “question routing” and “expert finding” are used to search major digital libraries. The final sample includes a list of 83 relevant articles authored in academia as well as industry that have been published from January 1, 2008 to March 1, 2019.

This study proposes a comprehensive framework to categorize extant studies into three broad areas of CQA expert recommendation research: understanding profile modeling, recommendation approaches and recommendation system impacts.

This paper focuses on discussing and sorting out the key research issues from these three research genres. Finally, it was found that conflicting and contradictory research results and research gaps in the existing research, and then put forward the urgent research topics.

In the big data era, image compression is of significant importance in today’s world. Importantly, compression of large sized images is required for everyday tasks; including electronic data communications and internet transactions. However, two important measures should be considered for any compression algorithm: the compression factor and the quality of the decompressed image. In this paper, we use Frei-Chen bases technique and the Modified Run Length Encoding (RLE) to compress images. The Frei-Chen bases technique is applied at the first stage in which the average subspace is applied to each 3 × 3 block. Those blocks with the highest energy are replaced by a single value that represents the average value of the pixels in the corresponding block. Even though Frei-Chen bases technique provides lossy compression, it maintains the main characteristics of the image. Additionally, the Frei-Chen bases technique enhances the compression factor, making it advantageous to use. In the second stage, RLE is applied to further increase the compression factor. The goal of using RLE is to enhance the compression factor without adding any distortion to the resultant decompressed image. Integrating RLE with Frei-Chen bases technique, as described in the proposed algorithm, ensures high quality decompressed images and high compression rate. The results of the proposed algorithms are shown to be comparable in quality and performance with other existing methods.

The purpose of this paper is to develop further understanding of the interdependence between product and organization subsystems in the context of major projects by empirically elaborating the volume-variety matrix.

Projects are perceived as systems that include a product subsystem (the project outcome) and an organization subsystem (the temporary multi-firm organizational network that produces the project outcome). This study addresses product-organization interdependence by analyzing product and organization subsystem components in terms of their uniqueness and reuse across multiple projects. The empirical analysis focuses on four global renewable fuels refinery projects implemented by Neste from 2003 to 2011. The refineries are based on the same proprietary technology but are unique at the project level.

The findings indicate interesting interdependencies between product and organization subsystems when analyzed at the component level: the findings suggest both diagonal and off-diagonal positions in the volume-variety matrix. An example of an off-diagonal position is a reused organization subsystem component associated with a unique product subsystem component, meaning that choosing the same organization in a future project can be used for acquiring an improved and, thereby, unique product subsystem component.

The study elaborates upon the volume-variety matrix in the context of major projects. The findings related to off-diagonal positions in the matrix provide new knowledge on combinations at the component level where a reused organization can be associated with a unique product, and vice versa. This has direct implications for management of projects.

The purpose of this paper is to investigate and quantify the impact of product complexity, including architectural complexity, on operator learning, productivity and quality performance in both assembly and disassembly operations. This topic has not been extensively investigated in previous research.

An extensive experimental campaign involving 84 operators was conducted to repeatedly assemble and disassemble six different products of varying complexity to construct productivity and quality learning curves. Data from the experiment were analysed using statistical methods.

The human learning factor of productivity increases superlinearly with the increasing architectural complexity of products, i.e. from centralised to distributed architectures, both in assembly and disassembly, regardless of the level of overall product complexity. On the other hand, the human learning factor of quality performance decreases superlinearly as the architectural complexity of products increases. The intrinsic characteristics of product architecture are the reasons for this difference in learning factor.

The results of the study suggest that considering product complexity, particularly architectural complexity, in the design and planning of manufacturing processes can optimise operator learning, productivity and quality performance, and inform decisions about improving manufacturing operations.

While previous research has focussed on the effects of complexity on process time and defect generation, this study is amongst the first to investigate and quantify the effects of product complexity, including architectural complexity, on operator learning using an extensive experimental campaign.

The primary objective of this paper is to show a systematic and methodological approach for the digitalization of critical clinical pathways (CPs) within the healthcare domain.

The methodology entails the integration of service design (SD) and action research (AR) methodologies, characterized by iterative phases that systematically alternate between action and reflective processes, fostering cycles of change and learning. Within this framework, stakeholders are engaged through semi-structured interviews, while the existing and envisioned processes are delineated and represented using BPMN 2.0. These methodological steps emphasize the development of an autonomous, patient-centric web application alongside the implementation of an adaptable and patient-oriented scheduling system. Also, business processes simulation is employed to measure key performance indicators of processes and test for potential improvements. This method is implemented in the context of the CP addressing transient loss of consciousness (TLOC), within a publicly funded hospital setting.

The methodology integrating SD and AR enables the detection of pivotal bottlenecks within diagnostic CPs and proposes optimal corrective measures to ensure uninterrupted patient care, all the while advancing the digitalization of diagnostic CP management. This study contributes to theoretical discussions by emphasizing the criticality of process optimization, the transformative potential of digitalization in healthcare and the paramount importance of user-centric design principles, and offers valuable insights into healthcare management implications.

The study’s relevance lies in its ability to enhance healthcare practices without necessitating disruptive and resource-intensive process overhauls. This pragmatic approach aligns with the imperative for healthcare organizations to improve their operations efficiently and cost-effectively, making the study’s findings relevant.

This paper aims to analyze how nearby property prices are affected by new construction projects in Stockholm. If there is an impact on property prices, the authors endeavor to investigate whether the effects vary among different areas within the municipality, for different groups of inhabitants and for different types of housing (i.e. public versus private housing).

The authors use a difference-in-difference specification in a hedonic model, and the sample consists of more than 90,000 observations over the period 2005-2013.

The results are robust and indicate that house prices in nearby areas increase following the completion of infill development. The results also indicate that infill development has a positive spillover effect on nearby dwelling prices only in areas with lower incomes, more public housing units and more inhabitants born abroad.

It provides an analysis on how nearby property prices are affected by new construction projects by creating a restricted control area, so as to make the treatment group and the control group more homogeneous. Thus, it mitigates any potential problems with spatial dependency, which can cause biased standard errors.

Project-driven supply chain risks pose a significant threat to the success of complex development projects, in terms of achieving key performances such as quality, time and efficiency. The purpose of this paper is to adopt a supply chain quality perspective in order to explore and better understand the unique attributes of risks associated with project-driven supply chains for continuously improving the quality of both processes and products.

Theoretically grounded in the framework of Bayesian Belief Networks and Game theory, this paper develops a structured process for assessing and managing risks in project-driven supply chains. The application of the proposed approach is demonstrated through a simulation case study conducted on the development project of Boeing 787 aircraft.

The conflicting incentives amongst stakeholders in a supply chain can jeopardise the success of a project and therefore, assessment of this category of risks classified as “Game theoretic risks” needs special consideration. Project-driven supply chain risks pose a significant threat to the success of complex projects. The results of the study clearly revealed that without mitigating the game theoretic risks, the main objective of timely completion of the Boeing 787 project was not materialised. Further, the lack of management expertise was the major factor contributing to the overall project costs including cost of quality.

The proposed process and analyses present a significant and original insight in terms of capturing the key determinants of both product and service quality such as product performance, convenience and reliability of service, timeliness, ease of maintenance, flexibility, and customer satisfaction and comfort. Propositions are developed for ascertaining the significance of information sharing in a project-driven supply chain, and a fair sharing partnership is introduced to help supply chain managers in managing game theoretic risks in order to achieve the goals of quality, time and efficiency.