Search results

This paper covers the development of a multidimensional contract administration performance model (CAPM) for construction projects. The proposed CAPM is intended to be used by the industry stakeholders to measure the construction contract administration (CCA) performance and identify the strengths and weaknesses of the CCA system for running or completed projects.

The research design follows a sequential mixed methodology of qualitative and quantitative data collection and analysis. In the first phase, contract administration indicators were collected from relevant literature. In the second phase, an online questionnaire was prepared, and data were collected and analyzed using the crisp value of fuzzy membership function, and structural equation modeling (SEM). The fuzzy set was chosen for this study due to the presence of uncertainty and fuzziness associated with the importance of several key indicators affecting the CCA performance. Finally, SEM was used to test and analyze interrelationships among constructs of CCA performance.

The data collected from 336 construction professionals worldwide through an online survey was utilized to develop the fuzzy structural equation model. The goodness-of-fit and reliability tests validated the model. The study concluded a significant correlation between CCA performance, CCA operational indicators, and the process groups.

The contribution of this paper to the existing knowledge is the development of a fuzzy structural equation model that serves as a measurement tool for the contract administration performance. This is the first quantitative structural equation model to capture contract administration performance. The model consists of 93 Construction Contract Administration(CCA) performance indicators categorized into 11 project management process groups namely: project governance and start-up; team management; communication and relationship management; quality and acceptance management; performance monitoring and reporting management; document and record management; financial management; changes and control management; claims and dispute resolution management; contract risk management and contract closeout management.

In their paper titled “A Miracle of Measurement or Accidental Constructivism? How PLS Subverts the Realist Search for Truth,” Cadogan and Lee (2022) cast serious doubt on PLS’s suitability for scientific studies. The purpose of this commentary is to discuss the claims of Cadogan and Lee, correct some inaccuracies, and derive recommendations for researchers using structural equation models.

This paper uses scenario analysis to show which estimators are appropriate for reflective measurement models and composite models, and formulates the statistical model that underlies PLS Mode A. It also contrasts two different perspectives: PLS as an estimator for structural equation models vs. PLS-SEM as an overarching framework with a sui generis logic.

There are different variants of PLS, which include PLS, consistent PLS, PLSe1, PLSe2, proposed ordinal PLS and robust PLS, each of which serves a particular purpose. All of these are appropriate for scientific inquiry if applied properly. It is not PLS that subverts the realist search for truth, but some proponents of a framework called “PLS-SEM.” These proponents redefine the term “reflective measurement,” argue against the assessment of model fit and suggest that researchers could obtain “confirmation” for their model.

Researchers should be more conscious, open and respectful regarding different research paradigms.

Researchers should select a statistical model that adequately represents their theory, not necessarily a common factor model, and formulate their model explicitly. Particularly for instrumentalists, pragmatists and constructivists, the composite model appears promising. Researchers should be concerned about their estimator’s properties, not about whether it is called “PLS.” Further, researchers should critically evaluate their model, not seek confirmation or blindly believe in its value.

This paper critically appraises Cadogan and Lee (2022) and reminds researchers who wish to use structural equation modeling, particularly PLS, for their statistical analysis, of some important scientific principles.

This study aims to find evidence of a possible relationship between three constructs that are generally investigated separately: entrepreneurial orientation, understood as entrepreneurship on the organizational level; marketing capability, seen as a highly competitive factor for the organization; and business performance, highlighted as a focus of the entire organization.

A survey-based quantitative approach was adopted with a cross-sectional temporal perspective. To arrive at results that can be compared, the study uses factor analysis and structural equations modeling techniques, with estimations of maximum likelihood for testing the quality of fit of the measures to the structural models, using SPSS 21 and AMOS 16 software. Data were collected at the 27th EXPOSUPER, which is a trade fair at which 35,000 visitors were present. The data collection instrument used is a questionnaire previously validated by Reis Neto et al. (2013a). The first section covers control variables chosen to profile the firms, the second contains entrepreneurial orientation variables, the third comprises marketing capability variables and the fourth section contains business performance variables, all using seven-point Likert response scales.

Tests of the entrepreneurial orientation measurement scale produced interesting results in this application within the retail supermarket industry. The results of exploratory factor analysis indicated that a scale with three dimensions was significant. The relationship between entrepreneurial orientation and marketing capability (H1) is positive, through the intermediate dimensions of innovation, proactiveness and risk-taking, used by firms’ management, contributing to their efforts to research and manage the market, to develop products and services and to offer better prices. Exploratory factor analysis and confirmatory factor analysis showed that four of the scale’s dimensions of the marketing capability were significant: market research, market management, new product development and pricing. Comparison of these results with those of Reis Neto et al. (2013a) reveals a difference, as although their result, achieved using structural equations modeling, also had four factors; the promotion dimension was the most significant and absorbed the other variables. Despite these differences, confirmatory factor analysis and structural equations modeling demonstrated that this construct met the minimum conditions for adequacy, where (H2), formulated to test the relationship between the marketing capability construct, was confirmed. The final construct analyzed in this study was business performance, initially suggested by González-Benito et al. (2009), and also used by Reis Neto et al. (2013a). They used the dimensions profitability, market value and market response, and in the present study, after exploratory factor analysis, confirmatory factor analysis and structural equations modeling, the results were identical to those authors results, in that (H3), formulated with the objective of testing the relationship between the entrepreneurial orientation construct and business performance, was confirmed, and although this was not the most robust of the relationships postulated in the three hypotheses, but was of lower significance.

Although this study has achieved its objective, one of the study’s limitations relates to the data collection instrument, which was subject to failures in terms of the number of variables to be analyzed in each dimension. This led to elimination of certain dimensions during the analyses. Another limitation is related to the method used in the study. When questionnaires are used as data collection instruments, respondents often may not understand the true meaning of questions, which could lead them to choose any option, thereby stripping the results of credibility. In view of this limitation, it is suggested that future researchers conduct qualitative studies, using the case study method, which could offer greater clarity and increase understanding of the results related to these subjects. Even considering that this study has certain limitations and restrictions affecting generalization, it is hoped that it raises new questions, interests and inspirations, improving and complementing understanding of this strong social and economic sector.

It is identify the relationship between entrepreneurial orientation and marketing capability, since to date there is no evidence from studies confirming the existence of such a relationship. This statement was based on the results of a bibliographic survey conducted using the ProKnow-C, knowledge development process-constructivist methodology, in which, this originality was positive and significant, offering new studies from this point of view.

Many important constructs of business and social sciences are conceptualized as composites of common factors, i.e. as second-order constructs composed of reflectively measured first-order constructs. Current approaches to model this type of second-order construct provide inconsistent estimates and lack a model test that helps assess the existence and/or usefulness of a second-order construct. The purpose of this paper is to present a novel three-stage approach to model, estimate, and test second-order constructs composed of reflectively measured first-order constructs.

The authors compare the efficacy of the proposed three-stage approach with that of the dominant extant approaches, i.e. the repeated indicator approach, the two-stage approach, and the hybrid approach by means of simulated data whose underlying population model is known. Moreover, the authors apply the three-stage approach to a real research setting in business research.

The study based on simulated data illustrates that the three-stage approach is Fisher-consistent, whereas the dominant extant approaches are not. The study based on real data shows that the three-stage approach is meaningfully applicable in typical research settings of business research. Its results can differ substantially from those of the extant approaches.

Analysts aiming at modeling composites of common factors should apply the proposed procedure in order to test the existence and/or usefulness of a second-order construct and to obtain consistent estimates.

The three-stage approach is the only consistent approach for modeling, estimating, and testing composite second-order constructs made up of reflectively measured first-order constructs.

People seem to function according to different models, which implies that in business and social sciences, heterogeneity is a rule rather than an exception. Researchers can investigate such heterogeneity through multigroup analysis (MGA). In the context of partial least squares path modeling (PLS-PM), MGA is currently applied to perform multiple comparisons of parameters across groups. However, this approach has significant drawbacks: first, the whole model is not considered when comparing groups, and second, the family-wise error rate is higher than the predefined significance level when the groups are indeed homogenous, leading to incorrect conclusions. Against this background, the purpose of this paper is to present and validate new MGA tests, which are applicable in the context of PLS-PM, and to compare their efficacy to existing approaches.

The authors propose two tests that adopt the squared Euclidean distance and the geodesic distance to compare the model-implied indicator correlation matrix across groups. The authors employ permutation to obtain the corresponding reference distribution to draw statistical inference about group differences. A Monte Carlo simulation provides insights into the sensitivity and specificity of both permutation tests and their performance, in comparison to existing approaches.

Both proposed tests provide a considerable degree of statistical power. However, the test based on the geodesic distance outperforms the test based on the squared Euclidean distance in this regard. Moreover, both proposed tests lead to rejection rates close to the predefined significance level in the case of no group differences. Hence, our proposed tests are more reliable than an uncontrolled repeated comparison approach.

Current guidelines on MGA in the context of PLS-PM should be extended by applying the proposed tests in an early phase of the analysis. Beyond our initial insights, more research is required to assess the performance of the proposed tests in different situations.

This paper contributes to the existing PLS-PM literature by proposing two new tests to assess multigroup differences. For the first time, this allows researchers to statistically compare a whole model across groups by applying a single statistical test.

One popular method to assess discriminant validity in structural equation modeling is the heterotrait-monotrait ratio of correlations (HTMT). However, the HTMT assumes tau-equivalent measurement models, which are unlikely to hold for most empirical studies. To relax this assumption, the authors modify the original HTMT and introduce a new consistent measure for congeneric measurement models: the HTMT2.

The HTMT2 is designed in analogy to the HTMT but relies on the geometric mean instead of the arithmetic mean. A Monte Carlo simulation compares the performance of the HTMT and the HTMT2. In the simulation, several design factors are varied such as loading patterns, sample sizes and inter-construct correlations in order to compare the estimation bias of the two criteria.

The HTMT2 provides less biased estimations of the correlations among the latent variables compared to the HTMT, in particular if indicators loading patterns are heterogeneous. Consequently, the HTMT2 should be preferred over the HTMT to assess discriminant validity in case of congeneric measurement models.

However, the HTMT2 can only be determined if all correlations between involved observable variables are positive.

This paper introduces the HTMT2 as an improved version of the traditional HTMT. Compared to other approaches assessing discriminant validity, the HTMT2 provides two advantages: (1) the ease of its computation, since HTMT2 is only based on the indicator correlations, and (2) the relaxed assumption of tau-equivalence. The authors highly recommend the HTMT2 criterion over the traditional HTMT for assessing discriminant validity in empirical studies.

The purpose of this paper is to develop a structural relationship model to study the relationship between causes and effects of poor communication and information exchange in construction projects using Smart-PLS.

The first method of this research is to identify the causes and effects factors of poor communication in construction projects from the extant of literature. The data used to develop the model was collected using a questionnaire survey, which targeted construction practitioners in the Malaysian construction industry. A five-point Likert type scale was used to rate the significance of the factors. The factors were classified under their relevant construct/group using exploratory factor analysis. A hypothetical model was developed and then transformed into Smart-PLS in which the hypothetical model suggested that each group of the cause factors has a direct impact on the effect groups. The hypothesis was tested using t-values and p-values. The model was assessed for its inner and outer components and achieved the threshold criterion. Further, the model was verified by engaging 14 construction experts to verify its applicability in the construction project setting.

The study developed a structural equation model to clarify the relationships between causes and effects of poor communication in construction projects. The model explained the degree of relationships among causes and effects of poor communication in construction projects.

The published academic and non-academic literature introduced many studies on the issue of communication including the definitions, importance, barriers to effective communication and means of poor communication. However, these studies ended up only on the general issue of communication lacking an in-depth investigation of the causes and effects of poor communication in the construction industry. The study implemented advanced structural modeling to study the causes and effects. The questionnaire, the data and concluding results fill the identified research gap of this study. The addressed issue is also of interest because communication is considered one of the main knowledge areas in construction management.

Partial least squares structural equation modeling (PLS-SEM) has become an established social sciences multivariate analysis technique. Since quality management researchers also increasingly using PLS-SEM, this growing interest calls for guidance.

Based on established guidelines for applying PLS-SEM and evaluating the results, this research reviews 107 articles applying the method and published in eight leading quality management journals.

The use of PLS-SEM in quality management often only draws on limited information and analysis results. The discipline would benefit from the method's more comprehensive use by following established guidelines. Specifically, the use of predictive model assessment and more advanced PLS-SEM analyses harbors the potential to provide more detailed findings and conclusions when applying the method.

This research provides first insights into PLS-SEM's use in quality management. Future research should identify the key areas and the core quality management models that best support the method's capabilities and researchers' goals.

The results of this analysis guide researchers who use the PLS-SEM method for their quality management studies.

This is the first article to systematically review the use of PLS-SEM in the quality management discipline.

This study aims to examine the role of an overall model fit assessment in the context of partial least squares path modeling (PLS-PM). In doing so, it will explain when it is important to assess the overall model fit and provides ways of assessing the fit of composite models. Moreover, it will resolve major concerns about model fit assessment that have been raised in the literature on PLS-PM.

This paper explains when and how to assess the fit of PLS path models. Furthermore, it discusses the concerns raised in the PLS-PM literature about the overall model fit assessment and provides concise guidelines on assessing the overall fit of composite models.

This study explains that the model fit assessment is as important for composite models as it is for common factor models. To assess the overall fit of composite models, researchers can use a statistical test and several fit indices known through structural equation modeling (SEM) with latent variables.

Researchers who use PLS-PM to assess composite models that aim to understand the mechanism of an underlying population and draw statistical inferences should take the concept of the overall model fit seriously.

To facilitate the overall fit assessment of composite models, this study presents a two-step procedure adopted from the literature on SEM with latent variables.

This paper clarifies that the necessity to assess model fit is not a question of which estimator will be used (PLS-PM, maximum likelihood, etc). but of the purpose of statistical modeling. Whereas, the model fit assessment is paramount in explanatory modeling, it is not imperative in predictive modeling.

Partial least squares (PLS) path modeling is a variance-based structural equation modeling (SEM) technique that is widely applied in business and social sciences. Its ability to model composites and factors makes it a formidable statistical tool for new technology research. Recent reviews, discussions, and developments have led to substantial changes in the understanding and use of PLS. The paper aims to discuss these issues.

This paper aggregates new insights and offers a fresh look at PLS path modeling. It presents new developments, such as consistent PLS, confirmatory composite analysis, and the heterotrait-monotrait ratio of correlations.

PLS path modeling is the method of choice if a SEM contains both factors and composites. Novel tests of exact fit make a confirmatory use of PLS path modeling possible.

This paper provides updated guidelines of how to use PLS and how to report and interpret its results.