Search results

The purpose of this paper is to prepare a dual-encapsulated halloysite nano-container to release the capsuled inhibitor as an additive for corrosion protection of epoxy coating.

Halloysite nano-containers (HNT) were prepared by simultaneously implanting inhibitor benzotriazole (BTA) into the inside and outside of the halloysite using reduced pressure and layer-by-layer (LBL) assembly, respectively. The microstructure and morphology of treated HNT were investigated using Fourier transform infrared spectroscopy and transmission electron microscopy. In addition, the anti-corrosion behaviors of the composite polyepoxy coating with inhibitor-loaded nano-containers BTA@HNT-2 were investigated using the electrochemical impedance spectroscopy and neutral salt spray test.

Test results showed that the LBL assembly structure of the halloysite nano-container makes the BTA@HNT-2 nano-container be controlled and sustained to release BTA, relying on the pH. Very importantly, the obtained nano-container is also responsive to temperature, owing to the thermosensitivity polyelectrolyte out-shell of the HNT. The result showed R_ct of the composite polyepoxy coating can be sufficient to maintain higher than 8.510E+7 Ω·cm² over 72 h of immersion test. Moreover, the artificial induced defects on the coating surface were sufficiently inhibited in the presence of BTA@HNT-2 nano-container in the polyepoxy coating.

Use of the BTA@HNT-2 as corrosion inhibitor nano-container, with good anti-corrosion property and dual-responsive to pH and temperature, offers a significant rout to prepare smart anti-corrosion coating for protecting metal substrate.

The coefficient of thermal expansion (CTE) and modulus of elasticity (ME) values of mortar and stone from room temperature to cryogenic temperatures provide an experimental basis for the design of liquefied natural gas (LNG) storage tanks.

The CTE and ME of mortar and limestone were measured by resistance strain gauge testing technology at cryogenic temperatures.

The test results showed that CTE values of mortar and stone decreased with the decrease of temperature and CTE values of mortar was greater than that of stone from 0 °C to −165 °C. The ME values of mortar increased significantly at cryogenic temperatures, and less change in stone.

The material at cryogenic temperatures may continue to work in the elastic phase due to the continuous increase of elastic modulus. Therefore, the study of material in the elastic stage may be more important than in the ultimate bearing capacity stage, and it is necessary to carry out further study surrounding the deformation properties of materials at cryogenic temperatures. The CTE and ME values of mortar and stone from room temperature to cryogenic temperatures provide an experimental basis for the design of LNG storage tanks.

The study examines the joint effect of sovereign and call risks on the duration of callable sovereign bonds over the period 1996–2011. The results indicate that the sovereign risk-adjusted duration is significantly shorter than its Macaulay counterpart for U.S. dollar-denominated investment-grade callable sovereign bonds. Further, the “shortening” effect of sovereign and call risks on duration is generally stronger among bonds of lower ratings. Similar results are obtained when CDS prices are used as a proxy for changes in sovereign risk. Results from this study emphasize the importance of considering the joint effect of sovereign and call risks in managing the interest rate risk exposure in fixed income investments.

To cope with the severe situation of the global climate, China proposed the “30 60” dual-carbon strategic goal. Based on this background, the purpose of this paper is to investigate scientifically and reasonably the interprovincial pattern of China’s power carbon emission intensity and further explore the causes of differences on this basis.

Considering the principle of “shared but differentiated responsibilities,” this study measures the carbon emissions within the power industry from 1997 to 2019 scientifically, via the panel data of 30 provinces in China. The power carbon emission intensity is chosen as the indicator. Using the Dagum Gini coefficient to explore regional differences and their causes.

The results of this paper show that, first, China’s carbon emission intensity from the power industry overall is significantly different. From the perspective of geospatial distribution, the three regions have unbalanced characteristics. Second, according to the decomposition results of the Gini coefficient, the overall difference in power carbon emission intensity is generally expanding. The geospatial and economic development levels are examined separately. The gaps between the eastern and economically developed regions are the smallest, and the regional differences are the source of the overall disparity.

Further exploring the causes of differences on this basis is crucial for relevant departments to formulate differentiated energy conservation and emission reduction policies. This study provides direction for analyzing the green and low carbon development of China’s power industry.

As an economic indicator of green and low-carbon development, CO₂ intensity of power industry can directly reflect the dependence of economic growth on the high emission of electricity and energy. and further exploring the causes of differences on this basis is crucial for relevant departments to formulate differentiated energy conservation and emission reduction policies.

For a long time, with the rapid economic development, resulting in the unresolved contradiction between low energy efficiency and high carbon emissions. To this end, scientifically and reasonably investigating the interprovincial pattern of China’s power carbon emission intensity, and further exploring the causes of differences on this basis, is crucial for relevant departments to formulate differentiated energy conservation and emission reduction policies.

Third, considering the influence of spatial factors on the convergence of power carbon emission intensity, a variety of different spatial weight matrices are selected. Based on the β-convergence theory from both absolute and conditional perspectives, we dig deeper into the spatial convergence of electricity carbon emission intensity across the country and the three regions.

The purpose of this investigation was to study the function mechanisms of a corrosion inhibitor package used for martensitic stainless steel tubulars in acid solution at high temperatures.

The inhibition performance was evaluated by means of an acid corrosion test at high temperature and high pressure, and the functional mechanism of the inhibitor package at different temperatures was investigated using polarization curve and electrochemical impedance spectroscopy measurements.

The results showed that the corrosion inhibitor package chosen for high-temperature and high-pressure gas well applications was very suitable for use with 13Cr super martensitic stainless steel. At lower temperatures, the function mechanism of the corrosion inhibitor package was characterized as a type of negative catalytic effect. As the temperature was increased, the effect of the intensifier in the package became more significant and the function mechanism changed to be the geometric covering effect type.

This study has the important practical value for guiding the oil field to conduct reasonable screening and using the acidizing corrosion inhibitor for martensite stainless steel tubulars.

Due to social transformation in China, more than 100,000,000 people are migrating within the country. Many parents are forced to leave their children behind when they migrate. In 2008, 58,000,000 children were living as left‐behind children, mainly in the rural parts of China (Zhang, 2009).Migration and its accompanying stressors may affect the mental health of the left‐behind children. This unique literature review of Chinese literature summarises the present state of knowledge and reviews the influential factors. Possible approaches to intervention and system reforms are discussed.A literature review was performed of published studies between 2001 and 2008. Databases used were Fujian Medical University Library Interface, Chinese National Knowledge Infrastructure, Wanfang Data, and VIP Information. The Chinese word for ‘left‐behind’ was used as a key word. Books, book chapters, monographs and studies on caring were searched electronically and by hand. Altogether, 53 items were found, discussed and grouped together. Migration affected the mental health of the left‐behind children in a passive way, especially their emotions and social behaviour.There is still controversy over how serious mental health problems are among children who have been left behind. Life events, personality, coping strategies and social suppor t can be regarded as four main factors that are predictive of mental health, which provides theoretical guidance for intervention. Suppor t and prevention of mental health problems in schools, in families and in primary care should be developed and studied.

This study aims to examine the impact of the COVID-19 pandemic on the relationship between auditors’ work stress and client participation with audit quality (AQ).

This study is a descriptive-survey type and the data were collected through a questionnaire distributed online. The statistical population consisted of auditors working in audit firms in Iran and the sample was selected using a random sampling method. Structural equation modeling was used to analyze the data.

The findings of this study suggest that the COVID-19 pandemic exacerbated the negative relationship between auditors’ work stress and AQ. In addition, the results indicate that client participation in the audit process did not significantly impact AQ during the COVID-19 pandemic.

Given the global and widespread impact of the COVID-19 pandemic on individuals’ lives and work settings, this study provides an opportunity to explore the challenges auditors face concerning health protocols and their well-being during the pandemic, specifically within the context of Iran. The unique circumstances of the pandemic have placed additional pressure on auditors to navigate and address the challenges arising from COVID-19 in their workplaces. Although research on the effects of the pandemic on accounting and auditing is ongoing, this study contributes to the literature by expanding our understanding of the specific implications and circumstances faced by auditors during the COVID-19 outbreak.

This is a literature survey paper. The purpose of this paper is to focus on the latest developments in textual analysis on China’s financial markets, highlighting its differences from existing works in the US markets.

The authors review the literature and carry out an experiment of sentiment analysis based on a small sample of Chinese news articles.

Based on the experiment of sentiment analysis, there is limited evidence on the association between sentiment and other contemporaneous or future returns.

The supply of financial textual information has grown exponentially in the past decades. Technological advancements in recent years make the programming-based analysis an effective tool to digest such information. The authors highlight the use of credible textual information and discuss directions of research in this important field.

The purpose of this paper is to provide an overview of the evolution of service supply chain management from a behavioural operations perspective, pointing out future research directions for scholars.

This study searched five databases for relevant literature published between 2009 and 2018, selecting 64 papers for this review. The selected literature was categorised according to two dimensions: a service supply chain link perspective and a behavioural factor perspective. Comparative analysis was used to identify gaps in the literature, and five future research agendas were proposed.

In terms of the perspective of service supply chain link, extant literature primarily focuses on service supply and service co-ordination management, and less on service demand and integration management. In terms of the behavioural factor’s perspective, most focus on classic behaviour factors, with less attention paid to emerging behaviour factors. This paper thus proposes five research agendas: demand-oriented management and integrated supply chain-oriented behavioural research; broadening the understanding of the scope of behavioural operations; integrating the latest backgrounds and trends of service industry into the research; greater attention to behavioural operations in service sub-industries; and multimethod combination is encouraged to be used to dig into the interesting research problems.

This study constitutes the first systematic review of service supply chain research from a behavioural perspective. By categorising the literature into two dimensions, the state of existing research is evaluated with an eye towards future research avenues.

Laser powder bed fusion (LPBF) can be used to fabricate complex extrusion die without the limitation of structures. Layer-by-layer processing leads to differences in microstructures and wear properties. This study aims to investigate the microstructure evolution and effects of tungsten carbide (WC) on the wear properties of LPBF-printed 18Ni300.

Economical spherical granulation-sintering-deoxygenation (GSD) WC-reinforced 18Ni300 steel matrix composites were produced by LPBF from powder mixtures of WC and 18Ni300. The effects of WC contents on anisotropic microstructures and wear properties of the composites were investigated.

The relative density is more than 99% for all the composites except 25% WC/18Ni300 composite. The grain sizes distributed on the top cross-section are smaller than those on the side cross-section. After adding WC particles, more high-angle grain boundaries and larger Schmid factor generate, and deformed grains decrease. With increasing WC contents, the hardness first decreases and then increases but the wear volume loss decreases. The side cross-section of the composite has higher hardness and better wear resistance. The 18Ni300 exhibits adhesive wear accompanying with abrasive wear, while plowing and fatigue wear are the predominant wear mechanisms of the composites.

Economical spherical GSD WC particles can be used to improve the wear resistance. The novel WC/18Ni300 composites are suitable for the application under the abrasive wear condition with low stress.