Search results
1 – 10 of 892Abeer Hassan and Xin Guo
The purpose of this paper is to assess whether European companies issue standalone environmental reports in an attempt to gain and maintain legitimacy with relevant stakeholders…
Abstract
Purpose
The purpose of this paper is to assess whether European companies issue standalone environmental reports in an attempt to gain and maintain legitimacy with relevant stakeholders. This is achieved by creating and empirically testing a model of the relationships between corporate reporting format, industry membership, environmental disclosure, and environmental performance.
Design/methodology/approach
Data are collected from 100 large European companies in carbon and non-carbon-intensive industries. Hypothesis testing is conducted via structure equation modeling.
Findings
Evidence exists that companies which disclose environmental information in standalone environmental reports tend to provide higher levels of environmental information than companies which combine financial and environmental disclosure in annual reports. The findings support greenwashing as a new perspective of legitimacy theory: companies in carbon-intensive industry use standalone environmental reports to pose as good corporate citizens even when they are not.
Research limitations/implications
The sample companies are large European companies and this could limit the generalizability of research findings. The authors call for longitudinal studies examining how the relationship between reporting format and environmental disclosure changes.
Practical implications
This paper suggests that reporting format be considered a proactive, strategic communication-driven activity rather than a decision that managers passively make in response to external scrutiny.
Originality/value
The paper contributes to the literature by adding to the scarce evidence of the relationship between reporting format and environmental disclosure. Greenwashing as a new perspective of legitimacy theory is used to develop research hypotheses.
Details
Keywords
Kun-cheng Zhang, Xin-chang Guo, Shi-zheng Tian, Qi Cui, Mao-chong Shi and Pei-fang Guo
Many experts suggest that the human being explore marine resources and marine new energy sources to alleviate the shortage of land resources and the ecological degradation…
Abstract
Purpose
Many experts suggest that the human being explore marine resources and marine new energy sources to alleviate the shortage of land resources and the ecological degradation. However, island coastal zones are considered to be fragile ecosystems; their geographical location and natural characteristics, their biodiversity and associated ecosystems, and their exposure to diverse land and sea conditions all make them highly vulnerable to environmental changes and human activities. Therefore, it is necessary to achieve the goals of environmental protection and sustainable development on the basis of a comprehensive evaluation and understanding of islands.
Design/methodology/approach
Due to the importance of island groups, this paper conducts evaluation studies on them. Using the Delphi, AHP and TOPSIS methods, this study evaluated quantitatively the comprehensive development level and comprehensive development potential of island groups in terms of resources, natural environment, economy and society. Innovatively using them as two subsystems, the present study combined the coupling coordination model and the obstacle factor calculation method.
Findings
The prospective index of comprehensive development was applied to the Changdao Island Group in Yantai, Shandong Province as an example, and the final evaluation revealed that the comprehensive development prospect of this island group had an upward trend from 2010 to 2017. Future efforts should be made to improve its economic and social conditions and economic development status, apart from promoting its comprehensive development by improving human resources management, increasing the GDP growth rate, and improving fresh water and electricity supply.
Originality/value
This study takes the integrated development level of the island and the integrated development potential of the island as two subsystems, and the innovative application of the coupling coordination degree model is used to calculate the integrated development index of the island to understand the development status of the island area. On the basis of this model, the obstacle factor identification method is designed to identify the main obstacle factors, and on the basis of evaluation and identification, specific measures to ensure the sustainable development of the island area are effectively proposed.
Details
Keywords
Alan Cheung, Xin Guo, Xiaorui Wang and Zhuang Miao
The purpose of this paper is to examine the key factors affecting Mainland Chinese students pursuing a Master of Education degree in Hong Kong on their study abroad decision and…
Abstract
Purpose
The purpose of this paper is to examine the key factors affecting Mainland Chinese students pursuing a Master of Education degree in Hong Kong on their study abroad decision and return intentions.
Design/methodology/approach
The current study employed a mixed-methods approach to investigate factors that affect Mainland Chinese students pursuing MEd degrees in Hong Kong. Participants were first invited to fill out a questionnaire. After collecting and analyzing the survey data, in-depth interviews with a selected group of students were carried out by the research team to obtain useful qualitative data to triangulate the survey findings. A purposeful and convenience sampling method, carried out through the personal network of the research team, was used to recruit MEd Mainland Chinese students in Hong Kong to participate in the current study.
Findings
The findings provided compelling evidence that Hong Kong was an attractive study destination to this particular group of MEd Chinese students. The findings also indicated that academic factors were more important than social, cultural and economic factors when it came to choosing their study destination. In contrast to previous studies, participants expressed a much stronger desire to return home upon graduation. The three most influential predictors of their decision to return were the lack of a Hong Kong teaching certificate (r=+0.36), the opportunity to contribute to their hometown (r=+0.31) and the inclination to be closer to family and friends (r=+0.20).
Originality/value
While a number of studies have been carried out to study why Mainland Chinese students chose Hong Kong as their study destination to pursue their teacher training degree, none of these studies focused exclusively on fee-paying MEd Chinese students. Hong Kong is facing keen competition from both traditional host countries and emerging host countries to recruit students from Mainland China. It is therefore crucial to understand the needs of these Mainland Chinese students in a competitive, globalized, tertiary education market, as the satisfaction of students, in the form of positive discussion among alumni, promotes a university’s reputation and sustains its advantage in attracting students.
Details
Keywords
Kuncheng Zhang, Shi-Zheng Tian, Benshuo Yang, Xin-Chang Guo and Yi-Fang Zhang
The island areas, in particular, are characterized by a more fragile ecological carrying capacity and higher value of resources and environment, which requires us to take Xi…
Abstract
Purpose
The island areas, in particular, are characterized by a more fragile ecological carrying capacity and higher value of resources and environment, which requires us to take Xi Jinping's green ecological development view as the theoretical basis and adhere to the high-quality development path of gradual development and ecological environment priority. Taking Shengsi and Daishan counties as examples, on the basis of their high-quality development evaluation and identification of the main influencing factors, this study explores the specific path of Xi Jinping's ecological development view in the high-quality development of typical island counties in China.
Design/methodology/approach
This paper applies the interpretative structural model to construct an evaluation index system for the high-quality development of the island. In determining the factor weights of the index layer, the AHP hierarchical analysis method was combined with the Delphi method to increase the objectivity of the assignment process as much as possible. This study used the technique for order of preference by similarity to ideal solution to calculate island high quality development index. To measure the main obstacle factors, the index factor contribution rate, the index factor deviation, and the index factor obstacle degree were applied in this research.
Findings
As China intensifies its maritime strategy, the sustainability of coastal and island regions is critical, particularly given their fragile ecosystems and high resource value. Our study reveals a declining trend in the high-quality development index for Shengsi, peaking at 0.4262 in 2010 and dropping to 0.3261 in 2012. To reverse this, it's essential to align with President Xi Jinping's green ecological development framework and commit to a high-quality development pathway.
Originality/value
The connotation and extension of Xi Jinping's view of ecological development should be continuously studied in depth and enriched, with green development as the core idea to guide the correct direction of the high-quality development of the island. In this paper, it is suggested that researchers are supposed to focus on these problems, such as the changes of sea water quality, the reduction of urban greening, the continuous negative growth of population in island areas, the decline of forestry added value and air quality protection, so as to ensure the sustainable high-quality development of example islands.
Details
Keywords
Xin Li, Jiming Guo and Lv Zhou
Global positioning system (GPS) kinematic positioning suffers from performance degradation in constrained environments such as urban canyons, which then restricts the application…
Abstract
Purpose
Global positioning system (GPS) kinematic positioning suffers from performance degradation in constrained environments such as urban canyons, which then restricts the application of high-precision vehicle positioning and navigation within the city. In December 2012, the BeiDou Navigation Satellite System (BDS) regional service was announced, and the combined BDS/GPS kinematic positioning has been enabled in the Asia-Pacific area. Previous studies have mainly focused on the performance evaluations of combined BDS/GPS static positioning. Not much work has been performed for kinematic vehicle positioning under constrained observation conditions. This study aims to analyze the performance of BDS/GPS kinematic vehicle positioning in various conditions.
Design/methodology/approach
In this study, three vehicle experiments under three observation conditions, an open suburban area, a less dense non-central urban area and a dense central urban area, are investigated using both the code-based differential global navigation satellite system (DGNSS) and phase-based real-time kinematic (RTK) modes. The comparison between combined BDS/GPS and GPS-only vehicle positioning solutions is conducted in terms of positioning availability and positioning precision.
Findings
Numerical results show that the combined BDS/GPS system significantly outperforms the GPS-only system under poor observation conditions, whereas the improvement was less significant under good observation conditions.
Originality/value
Thus, this paper studies the performance of combined BDS/GPS kinematic relative positioning under various observation conditions.
Details
Keywords
Yunhui Mei, Gang Chen, Xin Li, Guo‐Quan Lu and Xu Chen
The purpose of this paper is to determine: how much the residual curvature could be formed in sintered nano‐silver assembly when it is cooled to room temperature from the…
Abstract
Purpose
The purpose of this paper is to determine: how much the residual curvature could be formed in sintered nano‐silver assembly when it is cooled to room temperature from the sintering temperature (normally 275°C); how the cyclic temperature load affects the residual curvature or stresses in sintered joint. Then the stress level and the reliability of sintered nano‐silver for high‐temperature applications can be understood.
Design/methodology/approach
5 mm * 2.5 mm silicon chip was bonded with 96 per cent Al2O3 substrate by sintering nanosilver paste. An optical system was developed to measure the curvature of the sintered assemblies. Reliability of the sintered assemblies was evaluated by temperature cycling of −40∼125°C. Finite element analysis was employed to simulate the behavior of the joint subjected to the temperature cycling from −40°C to 125°C by ANSYS. SEM images were taken to investigate the impact of temperature cycling on the reliability of sintered silver attachment.
Findings
This residual bending at room temperature was found concave towards the substrate (alumina) side. Also, with the bondline thickness increasing, the residual curvature decreases obviously. The severity of the residual bending in all the structures was mitigated to some extent with increasing number of cycles. There is no crack in the joint with the thickness of 25 μm. The drop of the residual curvature of the samples with bondline of 25 μm is caused mainly by stress relaxation in sintered silver before 300 cycles. Sample with thicker bondline is more susceptible to thermal cycling for the structure bonded with nanosilver than that with thinner bondline. The poor quality of bonding is due to the thicker sintered joint, which means that sintered nanosilver is not suitable for die‐attachment requiring thick bondline.
Originality/value
The paper describes: how a precise optical system was developed to measure the residual curvature of the sintered assemblies; how the evolution of the residual curvature of the sintered assembly with the temperature cycling was obtained by both experiment and simulation; and how microstructures of the sintered silver joint were analyzed for as‐sintered assembly and the sintered assembly after temperature cycling.
Details
Keywords
Lai Jiang, Xiaobo Peng and Daniel Walczyk
This paper aims to summarize the up-to-date research performed on combinations of various biofibers and resin systems used in different three-dimensional (3D) printing…
Abstract
Purpose
This paper aims to summarize the up-to-date research performed on combinations of various biofibers and resin systems used in different three-dimensional (3D) printing technologies, including powder-based, material extrusion, solid-sheet and liquid-based systems. Detailed information about each process, including materials used and process design, are described, with the resultant products’ mechanical properties compared with those of 3D-printed parts produced from pure resin or different material combinations. In most processes introduced in this paper, biofibers are beneficial in improving the mechanical properties of 3D-printed parts and the biodegradability of the parts made using these green materials is also greatly improved. However, research on 3D printing of biofiber-reinforced composites is still far from complete, and there are still many further studies and research areas that could be explored in the future.
Design/methodology/approach
The paper starts with an overview of the current scenario of the composite manufacturing industry and then the problems of advanced composite materials are pointed out, followed by an introduction of biocomposites. The main body of the paper covers literature reviews of recently emerged 3D printing technologies that were applied to biofiber-reinforced composite materials. This part is classified into subsections based on the form of the starting materials used in the 3D printing process. A comprehensive conclusion is drawn at the end of the paper summarizing the findings by the authors.
Findings
Most of the biofiber-reinforced 3D-printed products exhibited improved mechanical properties than products printed using pure resin, indicating that biofibers are good replacements for synthetic ones. However, synthetic fibers are far from being completely replaced by biofibers due to several of their disadvantages including higher moisture absorbance, lower thermal stability and mechanical properties. Many studies are being performed to solve these problems, yet there are still some 3D printing technologies in which research concerning biofiber-reinforced composite parts is quite limited. This paper unveils potential research directions that would further develop 3D printing in a sustainable manner.
Originality/value
This paper is a summary of attempts to use biofibers as reinforcements together with different resin systems as the starting material for 3D printing processes, and most of the currently available 3D printing techniques are included herein. All of these attempts are solutions to some principal problems with current 3D printing processes such as the limit in the variety of materials and the poor mechanical performance of 3D printed parts. Various types of biofibers are involved in these studies. This paper unveils potential research directions that would further widen the use of biofibers in 3D printing in a sustainable manner.
Details
Keywords
Xin Guo, Angus Duff and Mario Hair
The purpose of this paper is to construct a measurement instrument to capture service quality in the Chinese corporate banking market.
Abstract
Purpose
The purpose of this paper is to construct a measurement instrument to capture service quality in the Chinese corporate banking market.
Design/methodology/approach
To create the measurement instrument, Chinese Banking Service Quality (CBSQ), constructs are utilised from the generic service quality literature and Chinese business culture. In addition, 18 financial managers were interviewed to identify how other aspects of the Chinese banking market could be included in the new instrument. CBSQ was administered to 259 corporate customers in China. Exploratory and confirmatory factor analyses were used to assist data reduction, test hypothesised models and refine scales.
Findings
Factor analysis identifies that service quality in Chinese corporate banking is measured by a nested model, consisting of two higher‐order constructs (i.e. functional quality and technical quality) and four lower‐order dimensions (i.e. reliability, human capital, technology and communication).
Research limitations/implications
The data were collected from corporate customers in China, and hence the findings of this paper may not be generalisable to other contexts.
Practical implications
The presence of CBSQ is timely given the rapid development of the Chinese banking sector, allowing Chinese domestic banks and international banks to incorporate service quality issues into their strategic planning. Particularly, bank management could benefit from focusing their efforts on the four dimensions of CBSQ.
Originality/value
This research contributes to our understanding of service quality in the Chinese banking market by creating CBSQ – a model to capture the quality of service provision in corporate banking. The utility of CBSQ for academics and practitioners is discussed along with avenues for future research.
Details
Keywords
Aleksandrs Urbahs and Vladislavs Zavtkevics
This paper aims to analyze the application of remotely piloted aircraft (RPA) for remote oil spill sensing.
Abstract
Purpose
This paper aims to analyze the application of remotely piloted aircraft (RPA) for remote oil spill sensing.
Design/methodology/approach
This paper is an analysis of RPA strong points.
Findings
To increase the accuracy and eliminate potentially false contamination detection, which can be caused by external factors, an oil thickness measurement algorithm is used with the help of the multispectral imaging that provides high accuracy and is versatile for any areas of water and various meteorological and atmospheric conditions.
Research limitations/implications
SWOT analysis of implementation of RPA for remote sensing of oil spills.
Practical implications
The use of RPA will improve the remote sensing of oil spills.
Social implications
The concept of oil spills monitoring needs to be developed for quality data collection, oil pollution control and emergency response.
Originality/value
The research covers the development of a method and design of a device intended for taking samples and determining the presence of oil contamination in an aquatorium area; the procedure includes taking a sample from the water surface, preparing it for transportation and delivering the sample to a designated location by using the RPA. The objective is to carry out the analysis of remote oil spill sensing using RPA. The RPA provides a reliable sensing of oil pollution with significant advantages over other existing methods. The objective is to analyze the use of RPA employing all of their strong points. In this paper, technical aspects of sensors are analyzed, as well as their advantages and limitations.
Details
Keywords
The purpose of this paper is to investigate the relationships between business risks and credit choices of 400 farm households surveyed in Shaanxi province in October 2007 in the…
Abstract
Purpose
The purpose of this paper is to investigate the relationships between business risks and credit choices of 400 farm households surveyed in Shaanxi province in October 2007 in the Yangling district. More specifically, this paper investigates whether or not rural farm households in China balance business risks from agricultural production with financial risk from the use of debt.
Design/methodology/approach
The data were collected through a survey of 400 farm households in Shaanxi province conducted in October 2007. Four separate regressions are run using a credit measure as the dependent variable and measures of profitability, risk, risk aversion, and demography, and debt source (formal versus informal lending) as independent variables.
Findings
The model shows evidence of risk balancing. That is, there is strong evidence that Chinese farmers reduce credit use and financial risk, as business risks increase.
Practical implications
The results suggest that Chinese policy makers could encourage the use of finacial leverage and prudent debt use by offering risk reducing programs such as crop insurance, weather insurance, or price insurance.
Originality/value
This paper uses a unique survey form to collect production risk data as well as gather information on credit use and sources. Data were collected so that risk measures could easily be computed using a triangular distribution. Furthermore, this is believed to be the first empirical validation of the risk balancing hypothesis.
Details