Search results

As a new communication paradigm, social networking sites (SNS) have boosted information diffusion and viral marketing. Prior researchers have identified various factors affecting information dissemination on SNS. However, they often focus on limited factors and there is a lack of an integrated theoretical framework that explains aspects of relevant factors. Besides, the research on the impacts of relationships on individual retweeting behavior is still controversial. The purpose of this paper is to propose a theoretical framework to systematically investigate the determinants of individual dissemination behavior on SNS based on the elaboration likelihood model (ELM). Moreover, the authors also examine the relative importance of those relevant factors.

The authors randomly selected 1,250 members of Twitter and crawled posts published by each member since he/she created the Twitter account using Twitter API. The authors processed the data to create panel data and tested hypotheses with the panel logit model.

Factors both on the central route and on the peripheral route of ELM have positive impacts on individual dissemination behavior. Among them, information receiver-related factor and relationships-related factors are the most influential. Contrastingly, source-related factors are the least influential. Furthermore, the authors find that social tie strength mediates almost 50 percent of the effect of value homophily on individual dissemination behavior.

The authors are the first to directly apply ELM to examine individual dissemination behavior on SNS. By integrating factors into the two information processing routes, They incorporate relevant factors into the model and systematically analyze their impacts on individual retweeting behavior on SNS. The research offers at least one explanation for the contradictory findings about the effect of homophily on individual sharing behavior in previous research. The authors propose new variables that gauge topical relevance and interpersonal value homophily on SNS.

The purpose of this paper is to investigate the overall flow and temperature field of the air in the whole power plant, especially around the air‐cooled heat exchanger (ACHE) to evaluate the feasibility of the thermal plant project.

The commercial computational fluid dynamics code FLUENT with standard k‐ε turbulent model was used. The buoyancy of the air was also considered.

It is concluded that plume recirculation occurs in each case due to the wind effect and the suction of the fan. Installing a side board below or above the fan platform (side board I or side board II) is an effective method of avoiding the plume recirculation and, the higher the board, the better the effect. When the height of the side board I H1≥10 m or the height of the side board II H2≥12 m, the temperature distributions of the fan platform will be sufficient to meet the requirement.

A proper distance between the adjacent high buildings and the ACHE should be found with further investigation.

The paper presents a very useful numerical method for the prediction of the flow and temperature field around ACHE or in a large space.

The paper provides the numerical simulation of the flow and heat transfer inside the whole thermal power plant. Suggestions which can effectively avoid the unfavorable influence and ensure the whole system in safe conditions are offered. The study gives some useful information to the design of a thermal power plant with an ACHE system.

This article aims to investigate motivations, success factors, problems, and business‐related stress of entrepreneurs in small‐ and medium‐sized enterprises and relates them to the success of the Chinese entrepreneurs.

A total of 196 entrepreneurs in Beijing, Shanghai, and Guangzhou were randomly selected for a survey, which was analyzed to determine motivations, success factors, problems, and business‐related stress by gender. Ordered logit models were applied to motivation and success factors.

Results showed that 68 percent were male and 32 percent female. The average age of the entrepreneurs was about 32 years old and time devoted to their business was almost 45 hours per week. Of the total respondents, 56 percent were married and 44 percent single. When asked to indicate their motives for business ownership, these entrepreneurs suggested that increasing income, becoming their own boss, and to prove that they can succeed were the most important reasons. Reputation for honesty, providing good customer services, and having good management skills were reported to be necessary conditions for business success. Friendliness to customers and hard work were also critical for high‐performance enterprises. Among the problems encountered by entrepreneurs, unreliable/undependable employees were the most critical. Intense competition and lack of management training also proved to be great challenges for Chinese entrepreneurs.

Policy makers can strengthen its small business entrepreneurs by promoting the factors that lead to entrepreneurs' success, such as the ability to manage personnel and management skills through business outreach services provided by universities, government agencies, and nonprofit organizations. In addition, the government has the ability to simplify the tax system, and reduce payroll taxes. Technical assistance in areas such as market research, human resources management, and technological support should be provided to small business owners.

This study applied to Chinese entrepreneurs in addition to an extensive analysis of the factors that affect motivations, success, problems, and business stress.

The paper is aimed to avoid the situation that historical relics are encroached, isolated and fragmented because of cities in the rapid urban process. Taking the environment around the Qinglong Temple in Xi'an city as an example and based on the characteristics of urban patterns in the history, this paper explores the spatial connection relationship between historical relics and surrounding villages as well as the connection between metro traffic and commercial bodies. At the end of the paper, the improvement strategy is put forward, namely the design concepts of “stepwise style” and “landscape style”, which can be achieved by the demand of ecological restoration and the relationship between urban axis. To be noted, the research shows, by restructuring new connection space, the city can promote the urban memory to be restored, the urban appearance to be reshaped, and the urban patterns in the history to be respected and displayed.

A successful process of design concept evaluation has positive influence on subsequent processes. This study aims to consider the evaluation information at multiple stages and the interaction among evaluators and improve the credibility of evaluation results.

This paper proposes a multi-stage approach for design concept evaluation based on complex network and bounded confidence. First, a network is constructed according to the evaluation data. Depending on the consensus degree of evaluation opinions, the number of evaluation rounds is determined. Then, bounded confidence rules are applied for the modification of preference information. Last, a planning function is constructed to calculate the weight of each stage and aggregate information at multiple evaluation stages.

The results indicate that the opinions of the evaluators tend to be consistent after multiple stages of interactive adjustment, and the ordering of design concept alternatives tends to be stable with the progress of the evaluation.

Updating preferences according to the bounded confidence rules, only the opinions within the trust threshold are considered. The attribute information of the node itself is inadequately considered.

This method addresses the need for considering the evaluation information at each stage and minimizes the impact of disagreements within the evaluation group on the evaluation results.

The recent global market trend is seemed enforcing existing manufacturing organizations (as well as service sectors) to improve existing supply chain systems or to take up/adapt advanced manufacturing strategies for being competitive. The concept of the agile supply chain (ASC) has become increasingly important as a means of achieving a competitive edge in highly turbulent business environments. An ASC is a dynamic alliance of member enterprises, the formation of which is likely to introduce velocity, responsiveness, and flexibility into the manufacturing system. In ASC management, supplier/partner selection is a key strategic concern. Apart from traditional supplier/partner selection criteria; different agility-related criteria/attributes need to be taken under consideration while selecting an appropriate supplier in an ASC. The paper aims to discuss these issues.

Therefore, evaluation and selection of potential supplier in an ASC have become an important multi-criteria decision making problem. Most of the evaluation criteria being subjective in nature; traditional decision-making approaches (mostly dealing with objective data) fail to solve this problem. However, fuzzy set theory appears an important mean to tackle with vague and imprecise data given by the experts. In this work, application potential of the fuzzy multi-level multi-criteria decision making (FMLMCDM) approach proposed by Chu and Velásquez (2009) and Chu and Varma (2012) has been examined and compared to that of Fuzzy-techniques for order preference by similarity to ideal solution (TOPSIS) and Fuzzy-MOORA in the context of supplier selection in ASC.

It has been observed that similar ranking order appears in FMLMCDM as well as Fuzzy-TOPSIS. In Fuzzy-MOORA, the best alternative appears same as in case of FMLMCDM as well as Fuzzy-TOPSIS; but for other alternatives ranking order differs. A comparative analysis has also been made in view of working principles of FMLMCDM, Fuzzy-TOPSIS as well as Fuzzy-MOORA.

Application feasibility of FMLMCDM approach has been verified in comparison with Fuzzy-TOPSIS and Fuzzy-MOORA in the context of agile supplier selection.

The geometric parameters of the compressor blade have a noteworthy influence on compressor stability, which should be meticulously designed. However, machining inaccuracies cause the blade geometric parameters to deviate from the ideal design, and the geometric deviation exhibits high randomness. Therefore, the purpose of this study is to quantify the uncertainty and analyze the sensitivity of the impact of blade geometric deviation on compressor stability.

In this work, the influence of blade geometric deviation is analyzed based on a subsonic compressor rotor stage, and three-dimensional numerical simulations are used to compute samples with different geometric features. A method of combining Halton sequence and non-intrusive polynomial chaos is adopted to carry out uncertainty quantitative analysis. Sobol’ index and Spearman correlation coefficient are used to analysis the sensitivity and correlation between compressor stability and blade geometric deviation, respectively.

The results show that the compressor stability is most sensitive to the tip clearance deviation, whereas deviations in the leading edge radius, trailing edge radius and chord length have minimal impact on the compressor stability. And, the effects of various blade geometric deviations on the compressor stability are basically independent and linearly superimposed.

This work provided a new approach for uncertainty quantification in compressor stability analysis. The conclusions obtained in this work provide some reference value for the manufacturing and maintenance of rotor blades.

The purpose of this paper is to develop and test a new public healthcare patient satisfaction index (PSI) in Indonesia. More clearly, the index measures overall patient satisfaction and its determinants.

Literature review was performed to identify the determinants of patient satisfaction. Data collection was carried out by using survey with questionnaire. The survey involves 161 patients of one public healthcare service institution in Tangerang, Indonesia. The authors conducted some statistical analyses, namely exploratory factor analysis, Cronbach α analysis, and multiple regression analysis.

A new public healthcare PSI was developed and tested. The index consists of overall patient satisfaction and its determinants. The determinants include the quality of healthcare delivery, the quality of healthcare personnel, the adequacy of healthcare resources, the quality of administration process, perceived value, perceived sacrifice, and image. Furthermore, the new index was called as IPHSI-PSB.

This research was carried out only in Tangerang, Indonesia and only involved one public healthcare service. Hence, the index needs to be tested in different cities in Indonesia. Furthermore, it is also needed to involve more public healthcare service institutions in future researches.

Public healthcare service managers can use IPHSI-PSB to monitor, measure, and improve the patient satisfaction of the public healthcare service institution they manage.

This paper has developed and tested a new public healthcare patient satisfaction index.

The purpose of this paper is to improve the mechanical and thermal properties of photosensitive resin for rapid prototyping (RP) by modifying with nano‐TiO₂.

The silane coupling agent was selected to treat the surface of anatase nano‐TiO₂ particles. The IR spectrum showed that the hydroxyl (−OH) group on the surface of nano‐TiO₂ reacted with the coupling agent effectively. The effects of TiO₂ content on the curing depth and viscosity of the photosensitive resin were studied by experiments. The mechanical properties including tensile strength, tensile modulus, flexural strength and hardness were tested according to ASTM standards. The thermal stability of modified photosensitive resin was tested by differential scanning calorimetry.

The comprehensive performance of the modified photosensitive resin was good when TiO₂ content was at 0.25 per cent, the tensile strength was increased by 89 per cent from 25.26  to 47.82 MPa, the tensile modulus increased by 18 per cent from 2,001  to 2,362 MPa, the flexural strength and the hardness increased by 6 and 5 per cent, respectively. In addition, the plasticity and heat stability of modified photosensitive resin were also improved obviously.

The paper provides a low‐cost method to greatly improve the performance of photosensitive resin for RP. The modified photosensitive resin prepared according to the formulas in this paper has been successfully employed in RP equipment of Xi'an Jiaotong University, China.