Search results

A positive outlook on the impact of Industry 4.0 (I4.0) on sustainability prevails in the literature. However, some studies have highlighted potential areas of concern that have not yet been systematically addressed. The goal of this study is to challenge the assumption of a sustainable Fourth Industrial Revolution by (1) identifying the possible unintended negative impacts of I4.0 technologies on sustainability; (2) highlighting the underlying motivations and potential actions to mitigate such impacts; and (3) developing and evaluating alternative assumptions on the impacts of I4.0 technologies on sustainability.

Building on a problematization approach, a systematic literature review was conducted to develop potential alternative assumptions about the negative impacts of I4.0 on sustainability. Then, a Delphi study was carried out with 43 experts from academia and practice to evaluate the alternative assumptions. Two rounds of data collection were performed until reaching the convergence or stability of the responses.

The results highlight various unintended negative effects on environmental and social aspects that challenge the literature. The reasons behind the high/low probability of occurrence, the severity of each impact in the next five years and corrective actions are also identified. Unintended negative environmental effects are less controversial than social effects and are therefore more likely to generate widely accepted theoretical propositions. Finally, the alternative hypothesis ground is partially accepted by the panel, indicating that the problematization process has effectively opened up new perspectives for analysis.

This study is one of the few to systematically problematize the assumptions of the I4.0 and sustainability literature, generating research propositions that reveal several avenues for future research.

The major objective of this research work was to evaluate various physico-chemical characteristics, such as, chemical composition, antioxidant capacity, objective color and texture profile analysis (TPA) of the wheat flour/chickpea flour (CF) blends, so that nutritious baked products could be consumed by the type-2 diabetic persons.

Wholegrain wheat flour (WGF) and white wheat flour (WWF) were substituted with CF at 0 to 40% levels. These wheat flour/CF blends were analyzed for proximate composition, the prepared dough and baked breads were tested for objective color, antioxidant capacity as trolox equivalent antioxidant capacity (TEAC), malondialdehyde (MDA) and total phenolic content (TPC) and TPA.

WGF had the highest TEAC (117.42 mM/100g) value, followed by WWF (73.98 mM/100g) and CF (60.67 mM/100g). TEAC, MDA and TPC values varied significantly among all the three flour samples.

Inclusion of whole chickpea (without dehulling) flour in such type of blends would be another interesting investigation during the future research studies.

These research findings have a great potential for the production of these baked products for human consumption on an industrial scale.

Production of breads using wheat flour and CF blends would benefits the consumers.

Production of Arabic and pan breads using wheat flour and CF blends would, therefore, combine the benefits of both the needed proteins of plant origin and the health-promoting bioactive compounds, in a most sustainable way for the consumers.

This paper aims to critically examine the accounting and information systems literature to understand the changes that are occurring in the management accounting profession. The changes the authors are interested in are linked to technology-driven innovations in managerial decision-making and in organizational structures. In addition, the paper highlights research gaps and opportunities for future research.

The authors adopted a grounded theory literature review method (Wolfswinkel et al., 2013) to achieve the study’s aims.

The authors identified four research themes that describe the changes in the management accounting profession due to technology-driven innovations: structured vs unstructured data, human vs algorithm-driven decision-making, delineated vs blurred functional boundaries and hierarchical vs platform-based organizations. The authors also identified tensions mentioned in the literature for each research theme.

Previous studies display a rather narrow focus on the role of digital technologies in accounting work and new competences that management accountants require in the digital era. By contrast, the authors focus on the broader technology-driven shifts in organizational processes and structures, which vastly change how accounting information is collected, processed and analyzed internally to support managerial decision-making. Hence, the paper focuses on how management accountants can adapt and evolve as their organizations transition toward a digital environment.

The design goal for the tracking interval of high-speed railway trains in China is 3 min, but it is difficult to achieve, and it is widely believed that it is mainly limited by the tracking interval of train arrivals. If the train arrival tracking interval can be compressed, it will be beneficial for China's high-speed railway to achieve a 3-min train tracking interval. The goal of this article is to study how to compress the train arrival tracking interval.

By simulating the process of dense train groups arriving at the station and stopping, the headway between train arrivals at the station was calculated, and the pattern of train arrival headway was obtained, changing the traditional understanding that the train arrival headway is considered the main factor limiting the headway of trains.

When the running speed of trains is high, the headway between trains is short, the length of the station approach throat area is considerable and frequent train arrivals at the station, the arrival headway for the first group or several groups of trains will exceed the headway, but the subsequent sets of trains will have a headway equal to the arrival headway. This convergence characteristic is obtained by appropriately increasing the running time.

According to this pattern, there is no need to overly emphasize the impact of train arrival headway on the headway. This plays an important role in compressing train headway and improving high-speed railway capacity.

Halal certification is an acknowledgment of the halalness of a product or service issued by a halal regulator based on Islamic law. This study aims to investigate the intentions of consumers and regulators toward blockchain-based halal certification. Blockchain is useful for storing and verifying halal certificates, thereby increasing trust in products or services because the public cannot change or access data once it is stored.

This study uses a triangulation approach by distributing online questionnaires to consumers as a research instrument of a quantitative approach processed with smart partial least squares. Meanwhile, the qualitative approach is carried out through observation, in-depth interviews with the Ministry of Religion’s Halal Product Assurance Organizing Agency (BPJPH) and Halal Examination Agency (LPH), and forum group discussions (FGDs) with several related parties.

The observation results show that most consumers expect the government to provide an easy-to-use application to check halal food products and restaurants. Consumers’ intention to use this technology is influenced directly by attitudes and indirectly by their beliefs. Furthermore, the results of interviews and FGDs reported that LPH was not ready to apply blockchain technology, while BPJPH strongly supported adopting blockchain technology in the certification process.

This finding recommends that the Indonesian government apply blockchain technology to gain transparency and accountability regarding the halal product process.

This study fills the research gap by observing three perspectives from different stakeholders and using a triangulation approach to analyze the need for adoption of blockchain-based halal certification of halal food products.

The objective of this study is to explore the level of understanding and actions taken by the people of Gurugram (erstwhile Gurgaon) to mitigate the impact of climate change, given its critical importance as a global issue.

Using a qualitative approach, primary data were collected through in-depth interviews by means of semi-structured interview methods.

The findings indicate that while people are aware of climate change, the information is deficient for them to translate their knowledge into effective action. Some of the major challenges identified are lack of appropriate understanding, resources, education, motivation and government initiatives, as well as the old habits, peer influence, feeling of incapability and limited media exposure. To bridge the intention-action gap, it is recommended that people should be empowered to act desirably. There is a change need for awareness and education on ways to mitigate the effects of climate change. The study has implications for researchers, environmentalists, policymakers, non-government organizations and local residents of Gurugram.

This study provides unique insights into the understanding of climate change by the general public and challenges faced in taking pro-environment actions. It emphasizes the urgent need to create awareness and educate individuals about ways to mitigate the impact of climate change.

The purpose of this paper is to investigate the most recurrent variables characterizing the collaborative relationships of industrial symbiosis (IS) (hereinafter also referred to as “anatomic” variables) established in the attempt to adopt circular economy (CE) by collecting evidence from a rich empirical set of implementation cases in Italy.

The current literature on IS was reviewed, and a content analysis was performed to identify and define the “anatomic” variables affecting its adoption in the circular economy. We followed a multiple-case study methodology investigating 50 cases of IS in Italy and performed a content analysis of the “anatomic” variables characterizing each case.

This research proposes the “anatomic” variables (i.e. industrial sectors involved, public actors involvement, governmental support, facilitator involvement and geographical proximity) explaining the cases of IS in the circular economy. Each “anatomic” variable is discussed at length based on the empirical evidence collected, with a particular reference to the impact on the different development strategies (i.e. “bottom-up” and “top-down”) in the cases observed.

Current literature on IS focuses on a sub-set of variables characterizing collaboration in IS. This research builds on extant literature to define a new framework of five purposeful “anatomic” variables defining IS in the circular economy. Moreover, we also collect and discuss a broad variety of empirical evidence in what is a still under-investigated context (i.e. Italy).

The Polish economy has undergone major challenges and changes over the past few decades. The country's trade flows, in particular, have become more firmly tied to the country’s Western neighbors as they have grown in volume. This study examines Poland's trade balances in ten Standard International Trade Classification (SITC) sectors versus the United States of America, first testing for and isolating structural breaks in each time series. These breaks are then included in a set of the cointegration models to examine their macroeconomic determinants.

Linear and nonlinear and nonlinear autoregressive distributed lag models, both with and without dummies corresponding to structural breaks, are estimated.

One key finding is that incorporating these breaks reduces the significance of the real exchange rate in the model, supporting the hypothesis that this variable already incorporates important information. It also results in weaker evidence for cointegration of all variables in certain sectors.

This study looks only at one pair of countries, without any third-country effects.

An important country pair's trade relations is examined; in addition, the real exchange rate is shown to incorporate economic information that results in structural changes in the economy. The paper extends the existing literature by conducting an analysis of Poland's trade balances with the USA, which have not been studied in such a context so far. A strong point is a broad methodology that lets compare the results the authors obtained with different kinds of models, both linear and nonlinear ones, with and without structural breaks.

The “chiralisation” of Euclidean polygonal tessellations is a novel, recent method which has been used to design new auxetic metamaterials with complex topologies and improved geometric versatility over traditional chiral honeycombs. This paper aims to design and manufacture chiral honeycombs representative of four distinct classes of 2D Euclidean tessellations with hexagonal rotational symmetry using fused-deposition additive manufacturing and experimentally analysed the mechanical properties and failure modes of these metamaterials.

Finite Element simulations were also used to study the high-strain compressive performance of these systems under both periodic boundary conditions and realistic, finite conditions. Experimental uniaxial compressive loading tests were applied to additively manufactured prototypes and digital image correlation was used to measure the Poisson’s ratio and analyse the deformation behaviour of these systems.

The results obtained demonstrate that these systems have the ability to exhibit a wide range of Poisson’s ratios (positive, quasi-zero and negative values) and stiffnesses as well as unusual failure modes characterised by a sequential layer-by-layer collapse of specific, non-adjacent ligaments. These findings provide useful insights on the mechanical properties and deformation behaviours of this new class of metamaterials and indicate that these chiral honeycombs could potentially possess anomalous characteristics which are not commonly found in traditional chiral metamaterials based on regular monohedral tilings.

To the best of the authors’ knowledge, the authors have analysed for the first time the high strain behaviour and failure modes of chiral metamaterials based on Euclidean multi-polygonal tessellations.

This paper aims to define the efficiency achieved by urban transport companies in Spain concerning the resources they use, considering the type of management used for implementation, public-private, and size.

This study consisted of an analysis of the efficiency of 229 public-private urban transport operators during the period 2012–2021 using Data Envelopment Analysis, the Malmquist Index and inference estimators to determine productivity, efficiency change into Pure Technical Efficiency Change (PTECH), and scale efficiency change.

Based on the efficiency analysis, the authors concluded that of the 229 companies studied, more than 35 were inefficient in all analysed periods. Considering the sample used, direct management is considered significantly more efficient. It cannot be concluded that the size of these companies influences their efficiency, as the data show unequal development behaviours in the studied years.

This study provides arguments on whether there is a significant difference between the two types of management in the urban transport sector. It also includes firm size as a study variable, which has not been previously considered in other studies related to urban transport efficiency. Efficiency should be a crucial factor in determining funding allocation in this sector, as it encourages operators to optimize and improve their services.