Search results

Water-lubricated bearings can significantly reduce the pollution to environment because the traditional oil lubricant is replaced by water in the bearings. The ultrahigh molecular weight polyethylene (UHMWPE) has proven to be effective and reliable for the manufacturing of water-lubricated bearings. However, limited work has been done to address the improvement of the tribological performance of the UHMWPE-based water-lubricated bearings using surface texture processing. This paper aims to investigate the effects of bar-grooved surface on the tribological performance improvement of UHMWPE-based water-lubricated bearings.

For the first time, the bar grooves were processed on the surfaces of UHMWPE-based water-lubricated bearings. The CBZ-1 friction and wear tester have been used to test the wear and friction performance of the bearing samples. The LI laser interference surface contour graph and the digital microscope have been used to measure the surface morphology of the specimens. The tribological characteristics of the tested bearings were analyzed.

With bar grooves added on the surfaces of the specimens, the friction coefficient of the specimens were lower than that of the specimens without surface texture processing; the wear quantity of the two kinds of specimens were almost the same; by using the LI laser interference surface contour graph and the digital microscope to measure the surface morphology of the specimens, the furrows of the specimens with bar grooves were narrower and shallower than that of the specimens without bar grooves.

The paper implicates that the surface texture processing using bar grooves can reduce the friction coefficient and prolong the service life of the water-lubricated bearings in practical applications.

This paper fulfills an identified need to provide important theoretical and experimental support to the design of water-lubricated bearings in practical applications.

In this paper, two promising corrosion inhibitors based on natural and eco-friendly materials such as peanut fatty acids (PFA) were prepared and challenged with a common efficient commercial inhibitor. Two amino derivatives based on aliphatic and aromatic compounds such as 2-amino-2-methyl-1-propanol (AMP) and 2-amino-2-phenyl-1-propanol (APP), respectively, were used and reacted with PFA under controlled conditions to produce the corrosion inhibitors. The prepared inhibitors, namely, PFA-AMP (inhІ) and PFA-APP (inhІІ), were confirmed and characterized by Fourier transfer infrared spectroscopy, acid value determination and viscosity measurements.

First, different coating formulations free from any inhibitors were prepared and irradiated under different doses of electron beam source to select the best dose. Several concentrations of synthesized anticorrosion materials were then added to coating formulations to estimate them as anticorrosion materials for mild steel panels. Then, all formulations were coated and polymerized at a dose of 10 kGy. The corrosion tests, weight loss and water uptake were studied for all films after immersion in 3.5% sodium chloride. Moreover, the chemical and physico-mechanical properties were determined for all films.

The results exhibited that the different concentrations of two inhibitors did not show any significant change on the different properties of all films, and the best concentration, which gives the better protection for steel panels, was to be 1.0 g for two inhibitors.

It was found that the protection efficiency of the inhІ is better and higher than that of the inhІІ and also of the commercial inhibitor with the following order: inhІ > commercial inhibitor > inhІІ.

The purpose of this study is to improve the coating properties of shellac–epoxidised novolac blends by treatment with melamine formaldehyde resin (MF) at ambient temperature for its use as a coating material.

Epoxidised-novolac resin was synthesised by epoxidation of novolac resin with epichlorohydrin. Novolac resin was synthesised by reaction of phenol with formaldehyde in acidic medium. Shellac was blended with the epoxidised-novolac resin in solution in varying ratios and treated the blends with MF resin in fixed ratio. Coating properties of the treated compositions were studied using a standard procedure. The compositions were characterised with Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and scanning electron microscopic (SEM) spectroscopy.

Treatment of shellac–epoxidised-novolac blends with MF resin improved water and alkali resistance of the blends, besides enhancing gloss. Gloss in all the blends was uniformly increased on treatment with MF resin. Water resistance of the blends tremendously improved after treatment with MF resin. Contact angle of the blends against water increased while decreased against ethylene glycol and dioxane. The compositions were more resistant to polar solvent than non-polar ones, suggesting that the compositions shifted to hydrophobic (lipophilic) nature on treatment with the MF resin.

A specified concentration of MF resin was used in the study. Different concentrations of the MF resin can also be tried for treatment of shellac–epoxidised-novolac blends to see the effect of the resin on the blends.

Treatment of shellac–epoxidised-novolac blend with MF resin improved the coating properties of the blends. The formulation SeNB-64 is the best with high gloss, good impact, scratch hardness and water resistance, and hence can be used as coating material for metal surfaces.

Blending of shellac with epoxidised-novolac resin and treatment of the blends with the MF resin was done for the first time. The formulation SeNB-64 can be used as coating material for metal surfaces.

The purpose of this paper is to synthesize anticorrosion pigments ZnFe₂O₄ from diverse raw materials of various shapes and size of primary particles.

Anticorrosion pigments were synthesized through a high‐temperature process during a solid phase. Zinc ferrites were prepared from hematite (α‐Fe₂O₃), goethite (α‐FeO.OH), magnetite (Fe₃O₄), and specularite (Fe₂O₃) entering into reaction with zinc oxide at temperatures ranging from 600 up to 1,100°C. The nature of the initial raw material, primarily the shape of its particles, affects the shape of the particles of the synthesized zinc ferrite. The formulated zinc ferrites had a rod‐shape, lamellar, and/or isometric shape. The shape of the particles of synthesized zinc ferrites was studied with regard to its effects on the mechanical and corrosion resistance of organic coatings. The obtained pigments were characterized by means of X‐ray diffraction analysis and scanning electron microscopy. The synthesized anticorrosion pigments were used to prepare epoxy coatings and water‐borne styrene‐acrylate coatings that were subjected to post‐application tests for physical‐mechanical properties and anticorrosion properties.

The shape of the particles was identified in the synthesized pigments. X‐ray diffraction analysis revealed the degree of precipitation and lattice parameters. All of the synthesized pigments had good anticorrosion efficiency in an epoxy and in styrene‐acrylate coatings. Compared with a commercially used anticorrosion pigment, their protective power in coatings was demonstrably stronger.

The synthesized pigments can be used conveniently in coatings protecting metal bases against corrosion.

The synthesis of zinc ferrites with different particle shapes for applications in anticorrosion coatings provides a new way of protecting metals against corrosion. Of benefit is the fact that the synthesized pigments do not contain any environmentally harmful substances.

The aim was not to perform a systematic review but firstly to search in PubMed, Science Direct, Scopus and Web of Science databases on the papers published in the last five years using tools for reviewing the statement of preferred information item for systematic reviews without focusing on a randomized analysis and secondly to perform a bibliometric analysis on the properties of films and coatings added of tocopherol for food packaging.

On January 24, 2022, information was sought on the properties of films and coatings added of tocopherol for use as food packaging published in PubMed, Science Direct, Scopus and Web of Science databases. Further analysis was performed using bibliometric indicators with the VOSviewer tool.

The searches returned 33 studies concerning the properties of films and coatings added of tocopherol for food packaging, which were analyzed together for a better understanding of the results. Data analysis using the VOSviewer tool allowed a better visualization and exploration of these words and the development of maps that showed the main links between the publications.

In the area of food science and technology, the development of polymers capable of promoting the extension of the shelf life of food products is sought, so the knowledge of the properties is vital for this research area since combining a biodegradable polymeric material with a natural antioxidant active is of great interest for modern society since they associate environmental preservation with food preservation.

The purpose of this research was to synthesize a novel cross-linked latex copolymerised by butyl acrylate (BA), isobornyl methacrylate (IBOMA), hydroxy propyl methacrylate (HPMA) and dodecafluoroheptyl methacrylate (DFMA). IBOMA is a very useful functional monomer. Its molecular structure not only contains bornyl acetate alkoxy but also includes a double bond, which can be copolymerised with other unsaturated monomers via free radical polymerization. The large nonpolar bicyclic alkyl in bornyl acetate alkoxy offers the polymer chain strong space steric protection, which endows the polymer with some special properties.

The semi-continuous seeded emulsion polymerisation technology was adopted to copolymerise BA, IBOMA, HPMA and DFMA in the water phase, which was initiated with potassium persulfate (KPS) and emulsified with the mixed surfactants of sodium dodecyl sulphate (SDS) and OP-10.

The particle size of the latex decreases with an increase in the amount of IBOMA. All the latexes have good mechanical stability and calcium ion stability. The latex has good film-forming property when the IBOMA amount is controlled moderately. The optimal IBOMA amount is 10.00 g. The thermal stability and water resistance of the film are improved.

The latexes can be applied as a binder of coatings and adhesions.

The effect of the amount of IBOMA and BA on the properties of the resultant latex and its film were investigated in detail. In comparison with the latexes copolymerised without IBOMA, the novel latex has better thermal stability and water resistance.

This paper is intended to be of interest to those involved in electronic applications of the screen printing process, including PCBs, membrane switches, thick film printing and instrument control panels. In recent years there have been a number of advances in screen printing technology which have significantly increased the capabilities and versatility of the process. Developments have included improvements in performance of screen printing machinery, mesh fabrics, stretching equipment, screen frame design, exposure devices, stencil systems and ink rheology and printability. In spite of these advances, there are many applications in PCB production where screen printing is under‐utilised, despite its cost effectiveness for volume board production when compared with dry film resists. This paper outlines some of the developments which have produced the modern screen stencils, and describes the rôle of mesh and stencil in determining the properties of the final printed result.

This paper aims to design the nano-titanium dioxide (TiO₂) coating system which has superhydrophilic property, self-cleaning mechanism and antifog property as well as strong adhesion on glass substrate.

Two hydrophilic materials have been used such as TiO₂ nanoparticles as fillers and hydrophilic copolymer, Pluronic F-127 by using simple sol–gel approach. The prepared solution was applied onto glass through dip- and spray-coating techniques and then left for drying at ambient temperature.

The nano-TiO₂ superhydrophilic coating has achieved the water contact angle of 4.9° ± 0.5°. The superhydrophilic coating showed great self-cleaning effect against concentrated syrup and methylene blue where thin layer of water washes the dirt contaminants away. The nano-TiO₂ coating exhibits great antifog performance that maintains high transparency of around 89% when the coated glass is placed above hot-fog vapor for 10 min. The fog droplets were condensed into water film which allowed the transmission of light through the glass. The strong adhesion of coated glass shows no total failure at scratch profile when impacted with scratch load of 500, 800 and 1,200 mN.

Findings will be useful in the development of self-cleaning superhydrophilic coating that is applicable on building glass and photovoltaic panel.

The developed nano-TiO₂ coating is developed by the combination of hydrophilic organic copolymer–inorganic TiO₂ network to achieve great superhydrophilic property, optimum self-cleaning ability and supreme antifog performance.

The findings will be useful for residents in building glass window where the application will reduce dust accumulation and keep the glass clean for longer period.

The synthesis of nano-TiO₂ superhydrophilic coating which can be sprayed on large glass panel and cured at ambient temperature.

To discuss the validity of the water break test, commonly used as a means of cleanliness determination in the printed circuit fabrication industry.

To examine qualitatively the physics of water‐wetting of solid substrates and their energy levels and the conditions under which cohesion may occur.

It would seem that conditions could occur, which would render the likelihood of the test being valid problematic.

Technical managers of fabricators using the test may wish to re‐examine whether it is valid under their particular circumstances. If it were replaced by a more scientific test covering their particular needs, it is possible that the reliability of subsequent operations may be improved, increasing production yield.

The author previously cast doubts on the test validity but this is the first physical analysis of the situation, confirming prior statements. The value of this paper is to demonstrate that a long‐standing practice may be either meaningless or of significantly reduced usefulness.

This paper aims to study the controlled release and synergistic effect of water-soluble polyvinyl alcohol (PVA) on phosphate corrosion inhibitor at the interface of thermal insulation cotton/carbon steel.

This study was carried out using a coating method, scanning electron microscopy, energy dispersive spectroscopy and AC impedance.

The single-phase phosphate particles were coated/adsorbed on the PVA film, which was formed on the fiber surface of corrosion inhibitor/PVA-impregnated rock wool sample. On the surface of Q235 steel, an effective protective film was formed by the corrosion inhibitor with partially dissolved PVA that can significantly increase the polarization resistance of corrosion reaction, and reduce the capacitive reactance of electric double layer. The rock wool impregnated with the phosphate corrosion inhibitor and 1.5 per cent PVA showed obvious controlled release and inhibition synergism.

The rock wool impregnated with the phosphate corrosion inhibitor and 1.5 per cent PVA showed the following advantages: the adsorption and release quantities of the corrosion inhibitor increased by 3.3 and 2.9 times, respectively; the release-adsorption equilibrium time increased from 2 to 6 h; and the corrosion inhibition efficiency increased from 61.55 per cent to 94.6 per cent.