Search results

Due to e-commerce growth, technological advancements and environmental concerns, developing a more nuanced service portfolio has become a critical issue for last-mile logistics service providers. Concurrently, consumers are adopting new modes of consumption. This paper aims to investigate the potential for last-mile logistics service providers to act as intermediaries in access-based consumption and to revitalise their service offerings through product-service systems – a pioneering strategy not executed in the market yet.

This strategic customer foresight study uses a quantitative survey of 1,000 respondents and an online focus group comprising 10 early adopter consumers to investigate emerging last-mile service models. Potential service concepts were identified through the survey, and two distinct concepts were subsequently selected for evaluation and co-development within the focus group. The research was conducted in partnership with an SME logistics company in Finland.

The consumers expressed selective interest in access-based consumption related to the proposed offering of essential household goods. Young adults and consumers in early middle age living in the city centre emerged as the most potential user groups. Economic reasons and short-term needs were the primary motivations for adopting access-based consumption.

The study showed that engaging consumers in a customer foresight process is viable for SMEs innovating their offerings and demonstrates how the process works in practice.

Documented cases of customer integration into foresight processes are rare in earlier research, and this paper extends the knowledge base through a multidisciplinary examination of future consumer behaviour in the last-mile logistics domain. The paper also expands the limited literature on the role of logistics in access-based consumption.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The Internet has changed consumer decision-making and influenced business behaviour. User-generated product information is abundant and readily available. This paper argues that user-generated content can be efficiently utilised for business intelligence using data science and develops an approach to demonstrate the methods and benefits of the different techniques.

Using Python Selenium, Beautiful Soup and various text mining approaches in R to access, retrieve and analyse user-generated content, we argue that (1) companies can extract information about the product attributes that matter most to consumers and (2) user-generated reviews enable the use of text mining results in combination with other demographic and statistical information (e.g. ratings) as an efficient input for competitive analysis.

The paper shows that combining different types of data (textual and numerical data) and applying and combining different methods can provide organisations with important business information and improve business performance.

The paper shows that combining different types of data (textual and numerical data) and applying and combining different methods can provide organisations with important business information and improve business performance.

The study makes several contributions to the marketing and management literature, mainly by illustrating the methodological advantages of text mining and accompanying statistical analysis, the different types of distilled information and their use in decision-making.

This study aims to introduce the design and the design process for an innovative sanitary fixture to be used in public facilities for the purpose of ablution. This purpose-made fixture is needed to support the hygienic, safe and comfortable performance of this essential function in public facilities in many parts of the world. The study also clarifies the need for this function and critically reviews current designs to address it.

The study started by critically reviewing the standard built-in models for ablution. It also identified and analyzed new approaches to designing standalone ablution fixtures. The study then specified the characteristics of a better ablution fixture and involved drafting a design based on these characteristics, making a wooden prototype to test the design and receiving users’ feedback. The design was adjusted and tested again for more feedback. Finally, the study resulted in the development of a final design. It used digital fabrication to create the design prototype with improved aesthetics, tested it again and received user feedback.

A survey of users showed that they found the innovative fixture more comfortable and safer than the commonly used built-in models. The main concern was the potential for water to splash on clothes from the high faucet.

In addition to showing an innovative design for a purpose-made sanitary fixture for ablution, the study makes the reader aware of the various challenges of providing a hygienic, safe and comfortable facility for users to perform this function. This is very useful for the many designers and facility managers who deal with the issue.

In this case study, we examine how a citrus peel valorising company based in the Netherlands was able to adopt a circular business model while navigating regulatory, managerial, and supply chain-related barriers.

In-depth, semi-structured interviews with key personnel in the company, notes from field observations, photographs of the production process, and documents from a legal judgement served as data for this single, qualitative case study. Data were coded inductively using the in vivo technique and were further developed into four themes and a case description.

Results from our study indicate that the regulatory and political contexts in the Netherlands were critical to the company’s success. Like in the case of most fruitful industrial symbioses, partnerships founded on mutual trust and economically appealing value propositions played a crucial role in ensuring commercial viability. Collaborating with larger corporations and maintaining transparent communication with stakeholders were also significant contributing factors. Lastly, employees’ outlook towards circularity combined with their willingness to learn new skills were important driving factors as well.

In addition to expanding the scholarship on the adoption of circular business models, this research offers novel insights to policymakers and practitioners. It provides empirical evidence regarding the importance of public awareness, adaptable legislation, and harmonised policy goals for supporting sustainable entrepreneurship in the circular economy.

Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with high degree of resilience against climate change. In this context, a promising construction technique is represented by ventilated façades (VFs). This paper aims to propose three different VFs and the authors define a novel machine learning-based approach to evaluate and predict their energy performance under different boundary conditions, without the need for expensive on-site experimentations

The approach is based on the use of machine learning algorithms for the evaluation of different VF configurations and allows for the prediction of the temperatures in the cavities and of the heat fluxes. The authors trained different regression algorithms and obtained low prediction errors, in particular for temperatures. The authors used such models to simulate the thermo-physical behavior of the VFs and determined the most energy-efficient design variant.

The authors found that regression trees allow for an accurate simulation of the thermal behavior of VFs. The authors also studied feature weights to determine the most relevant thermo-physical parameters. Finally, the authors determined the best design variant and the optimal air velocity in the cavity.

This study is unique in four main aspects: the thermo-dynamic analysis is performed under different thermal masses, positions of the cavity and geometries; the VFs are mated with a controlled ventilation system, used to parameterize the thermodynamic behavior under stepwise variations of the air inflow; temperatures and heat fluxes are predicted through machine learning models; the best configuration is determined through simulations, with no onerous in situ experimentations needed.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

The purpose of this paper is to assess the appropriateness of equal weights estimation (sumscores) and the application of the composite equivalence index (CEI) vis-à-vis differentiated indicator weights produced by partial least squares structural equation modeling (PLS-SEM).

The authors rely on prior literature as well as empirical illustrations and a simulation study to assess the efficacy of equal weights estimation and the CEI.

The results show that the CEI lacks discriminatory power, and its use can lead to major differences in structural model estimates, conceals measurement model issues and almost always leads to inferior out-of-sample predictive accuracy compared to differentiated weights produced by PLS-SEM.

In light of its manifold conceptual and empirical limitations, the authors advise against the use of the CEI. Its adoption and the routine use of equal weights estimation could adversely affect the validity of measurement and structural model results and understate structural model predictive accuracy. Although this study shows that the CEI is an unsuitable metric to decide between equal weights and differentiated weights, it does not propose another means for such a comparison.

The results suggest that researchers and practitioners should prefer differentiated indicator weights such as those produced by PLS-SEM over equal weights.

To the best of the authors’ knowledge, this study is the first to provide a comprehensive assessment of the CEI’s usefulness. The results provide guidance for researchers considering using equal indicator weights instead of PLS-SEM-based weighted indicators.

High levels of child obesity alongside rising stunting and the absence of a coherent food policy have deemed UK’s food system to be broken. The National Food Strategy (NFS) was debated intensely in media, with discussions on how and who should fix the food system.

Using a mixed methods approach, the authors conduct framing analysis on traditional media and sentiment analysis of twitter reactions to the NFS to identify frames used to shape food system policy interventions.

The study finds evidence that the media coverage of the NFS often utilised the tropes of “culture wars” shaping the debate of who is responsible to fix the food system – the government, the public or the industry. NFS recommendations were portrayed as issues of free choice to shift the debate away from government action correcting for market failure. In contrast, the industry was showcased as equipped to intervene on its own accord. Dietary recommendations made by the NFS were depicted as hurting the poor, painting a picture of helplessness and loss of control, while their voices were omitted and not represented in traditional media.

British media’s alignment with free market economic thinking has implications for food systems reform, as it deters the government from acting and relies on the invisible hand of the market to fix the system. Media firms should move beyond tropes of culture wars to discuss interventions that reform the structural causes of the UK’s broken food systems.

As traditional media coverage struggles to capture the diversity of public perception; the authors supplement framing analysis with sentiment analysis of Twitter data. To the best of our knowledge, no such media (and social media) analysis of the NFS has been conducted. The paper is also original as it extends our understanding of how media alignment with free market economic thinking has implications for food systems reform, as it deters the government from acting and relies on the invisible hand of the market to fix the system.

This study aims to increase knowledge of the ability of nutrition labels to guide consumer choices in real-life environments.

Food consumption and plate waste data were collected from two self-service restaurants (SSR) with different customer groups over six observation days: three control and three intervention (with nutrition labelling) periods. Study Group 1 consisted of vocational school students, mostly late adolescents (N = 1,710), and Group 2 consisted of spa hotel customers, mostly elderly (N = 1,807). In the experimental restaurants, the same food was served to the buffets during the control and intervention periods.

The nutrition label in the lunch buffet guides customers to eat fewer main foods and salads and to select healthier choices. Increased consumption of taste enhancers (salt and ketchup) was observed in the study restaurants after nutritional labelling. Nutrition labelling was associated with a reduction in plate waste among the elderly, whereas the opposite was observed among adolescents.

The results provide public policymakers and marketers with a better understanding of the effects of nutrition labelling on consumer behaviour. Future studies should further evaluate the effects of nutrition labelling on the overall quality of customer diets and the complex environmental, social, and psychological factors affecting food choices and plate waste accumulation in various study groups.