Search results

Solar cells could make textile-based wearable systems energy independent without the need for battery replacement or recharging; however, their laundry resistance, which is prerequisite for the product acceptance of e-textiles, has been rarely examined. This paper aims to report a systematic study of the laundry durability of solar cells embedded in textiles.

This research included small commercial monocrystalline silicon solar cells which were encapsulated with functional synthetic textile materials using an industrially relevant textile lamination process and found them to reliably endure laundry washing (ISO 6330:2012). The energy harvesting capability of eight textile laminated solar cells was measured after 10–50 cycles of laundry at 40 °C and compared with light transmittance spectroscopy and visual inspection.

Five of the eight textile solar cell samples fully maintained their efficiency over the 50 laundry cycles, whereas the other three showed a 20%–27% decrease. The cells did not cause any visual damage to the fabric. The result indicates that the textile encapsulated solar cell module provides sufficient protection for the solar cells against water, washing agents and mechanical stress to endure repetitive domestic laundry.

This study used rigid monocrystalline silicon solar cells. Flexible amorphous silicon cells were excluded because of low durability in preliminary tests. Other types of solar cells were not tested.

A review of literature reveals the tendency of researchers to avoid standardized textile washing resistance testing. This study removes the most critical obstacle of textile integrated solar energy harvesting, the washing resistance.

International outbreak of the SARS-CoV-2 infection has fostered the Italian government to impose the FFP2 protective facial masks in closed environments, including bar, restaurants and, more in general, in the food sector. Protective facial masks are rocketing, both in mass and in costs, in the food sector imposing efforts in fostering reuse strategies and in the achievement of sustainable development goals. The scope of the present paper is to depict possible strategies in manufacturing and reuse strategies that can reduce the carbon footprint (CF) of such devices.

To implement circular economy strategies in the protective facial masks supply chain, it was considered significant to move towards a study of the environmental impact of such devices, and therefore a CF study has been performed on an FFP2 facial mask used in the food sector. Different materials besides the mostly used polypropylene (PP) (polyethylene (PE), polycarbonate (PC), poly (lactic acid) (PLA), cotton, polyurethane (PUR), polystyrene (PS) and nylon 6,6) and different sanitisation alternatives as reuse strategies (both laboratory and homemade static oven, ultraviolet germicidal irradiation) readily implemented have been modelled to calculate the CF of a single use of an FFP2 mask.

The production of textiles in PP, followed by disposal was the main contributor to CF of the single-use FFP2 mask, followed by packaging and transportations. PP and PE were the least impacting, PC, cotton and Nylon 6-6 of the same weight results the worst. PLA has an impact greater than PP and PE obtained from crude oil, followed by PUR and PS. Static laboratory oven obtained an 80.4% reduction of CF with respect to single use PP-made FFP2 mask, whereas homemade oven obtained a similar 82.2% reduction; UV cabinet is the best option, showing an 89.9% reduction.

The key strategies to reduce the environmental impacts of the masks (research for new materials and reuse with sanitisation) should ensure both the retention of filtering capacities and the sanitary sterility of the reused ones. Future developments should include evaluations of textile recycling impacts, using new materials and the evaluation of the life cycle costs of the reused masks.

This paper intends to provide to stakeholders (producers, consumers and policy makers) the tools to choose the best option for producing and reuse environmentally friendly protective facial masks to be used in the food sector, by using both different materials and easily implemented reuse strategies.

The reduction of the CF of protective facial masks in the food sector surely will have relevant positive effects on climate change contributing to reach the goals of reducing CO₂ emissions. The food sector may promote sustainable practices and attract a niche piece of clients particularly sensible to such themes.

The paper has two major novelties. The first one is the assessment of the CF of a single use of an FFP2 mask made with different materials of the non-woven filtering layers; as the major contribution to the CF of FFP2 masks is related to the non-woven textiles manufacturing, the authors test some other different materials, including PLA. The second is the assessment of the CF of one single use of a sanitised FFP2 mask, using different sanitation technologies as those allowed in bars or restaurants.

Due to e-commerce growth, technological advancements and environmental concerns, developing a more nuanced service portfolio has become a critical issue for last-mile logistics service providers. Concurrently, consumers are adopting new modes of consumption. This paper aims to investigate the potential for last-mile logistics service providers to act as intermediaries in access-based consumption and to revitalise their service offerings through product-service systems – a pioneering strategy not executed in the market yet.

This strategic customer foresight study uses a quantitative survey of 1,000 respondents and an online focus group comprising 10 early adopter consumers to investigate emerging last-mile service models. Potential service concepts were identified through the survey, and two distinct concepts were subsequently selected for evaluation and co-development within the focus group. The research was conducted in partnership with an SME logistics company in Finland.

The consumers expressed selective interest in access-based consumption related to the proposed offering of essential household goods. Young adults and consumers in early middle age living in the city centre emerged as the most potential user groups. Economic reasons and short-term needs were the primary motivations for adopting access-based consumption.

The study showed that engaging consumers in a customer foresight process is viable for SMEs innovating their offerings and demonstrates how the process works in practice.

Documented cases of customer integration into foresight processes are rare in earlier research, and this paper extends the knowledge base through a multidisciplinary examination of future consumer behaviour in the last-mile logistics domain. The paper also expands the limited literature on the role of logistics in access-based consumption.

This study investigates the barriers and drivers of using green methods and technologies (GMTs) in supportive educational buildings (SEBs) in South Africa, and assesses their impact on the circular economy (CE) in achieving net-zero carbon goals. While there has been extensive literature on green building technologies, there is limited research on the barriers and drivers of using GMT in SEBs, as well as their impact on the circular economy (CE) in achieving net-zero carbon goals.

This study adopts an interpretivist approach with an ontological basis, using an overarching case study of a SEB at the University of Cape Town (UCT). Semistructured interviews were conducted with executive UCT management, and a field survey of a UCT supportive education building was performed.

At UCT, multiple GMTs have been installed across various buildings to enhance monitoring and management of water and energy consumption. Moreover, initiatives to positively influence student behavior, such as water and energy-saving campaigns around UCT premises, have been introduced. The findings further indicate that UCT has recently emphasized the implementation of GMTs, resulting in improved resource efficiency, CE practices and progress toward achieving net-zero carbon targets for supportive education buildings and the university as a whole.

This research highlights the positive impact of GMTs on a SEB’s CE and net-zero carbon operations. As a result, facility managers should consider incorporating GMTs when planning the development or refurbishment of SEBs.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Family business sustainability is a critical issue. This study considers if adopting a strategic entrepreneurship orientation can support the sustainability of a family business.

A qualitative approach is used, in which semi-structured interviews were conducted with twelve family business owners. Data collected during the interviews provides insights into understanding, practices, motivations, behaviours and attitudes relating to sustainability.

Although awareness of sustainability processes and procedures is found to be low, sustainability is important to the family business. However, sustainability is not managed or implemented systematically.

The paper presents a new model to describe the sustainability practices of family businesses. Adoption of strategic entrepreneurship is advocated as mechanism for improving sustainability. Practical and policy implications are suggested to enhance the effectiveness of sustainability initiatives in family business settings.

The Gulf Cooperation Council (GCC) of countries has some of the highest electricity consumptions and carbon dioxide emissions per capita in the world. This poses a direct challenge to the GCC government’s ability to meet their CO₂ reduction targets. In this review paper the current household electricity consumption situation in the GCC is reviewed.

Three scenarios for reducing energy consumption and CO₂ emissions are proposed and evaluated using strengths, weaknesses, opportunities and threats (SWOT) as well as the political, economic, social, technical, legal and environmental (PESTLE) frameworks.

The first scenario found that using solar Photovoltaic (PV) or hybrid solar PV and wind system to power household lighting could save significant amounts of energy, based on lighting making up between 8% to 30% of electricity consumption in GCC households. The second scenario considers replacement of conventional appliances with energy-efficient ones that use around 20% less energy. The third scenario looks at influencing consumer behavior towards sustainable energy consumption.

Pilot trials of these scenarios are recommended for a number of households. Then the results and feedback could be used to launch the schemes GCC-wide.

The proposed scenarios are designed to encourage responsible electricity consumption and production within households (SDG12).

All three proposals are found viable for policymakers to implement. However, to ensure successful implementation GCC Governments are recommended to review all the opportunities and challenges associated with these schemes as laid out in this paper.

This study aims to determine the antecedents that influence attitudes towards the use of environmentally friendly household appliance products and consumers' green purchase intention among consumers in Harare, Zimbabwe.

Data were collected from 329 consumers in Harare, Zimbabwe's commercial capital who were served from five using a structured questionnaire via an online web-based cross-sectional survey. Hypothesised relationships were tested through structural equation modelling with the aid of Smart PLS software.

Green product awareness, social influence, perceived benefit and attitude towards green appliances were found to have a significant positive effect on green purchase intention.

The study's findings may not be generalised to other contexts as sample data was only collected in Zimbabwe. Complementary cross-sectional research studies can be done in other parts of the world to enable cross-cultural comparisons and methodological validations.

The green appliance and energy saving practices are vastly growing, with many multinational appliance companies introducing green products within their product lines and adopting the concept of sustainability through modifications in production, design and consumption of household appliance products that encompass fewer harmful consequences on the environment in response to their concerns about the scarcity of natural resources, environmental well-being and the potential detriment of future generations.

Notwithstanding the limitations of the current study, the results have the potential to contribute to an improved understanding of influence attitudes towards the use of environmentally friendly household appliance products.

Industry 4.0 (I40) is an open window of opportunity for Turkey, a developed country, to eliminate technological dependence and produce with maximum productivity. However, I40, which corresponds to the fourth wave of industrial revolutions, brings both opportunities and challenges. In this context, this study aims to reveal the foresight of managers in the Turkish white goods industry (TWGI) regarding the advantages and challenges of I40 and compare them with the literature.

The Delphi method was used for the study. Data were collected from managers of companies that are members of the White Goods Suppliers Association (BEYSAD). Seventy managers from 55 companies participated in the first round, and 19 managers participated in the second round of Delphi.

The results show that the most frequently cited advantages are productivity/resource efficiency, data and information-enabled effectiveness/productivity, quality 4.0 and competitiveness/strategy. The most frequently mentioned challenges are financial resources/investment, employee qualification/training, technical/processual challenges and organizational transformation/leadership.

The sample was limited to the managers of the TWGI.

Players in similar ecosystems and policymakers should consider the advantages and respond to potential challenges when creating roadmaps, taking the necessary steps and positioning themselves in the marketplace. In particular, the TWGI – Turkey’s showcase in international markets – should consider the undeniable benefits of the I40 transition to increase innovation.

The findings for the first time highlight the advantages and challenges of I40 in an industry in Turkey, and they will benefit the TWGI, which is among the leaders in Turkey in terms of digital maturity and innovation in its journey to I40.

The Internet has changed consumer decision-making and influenced business behaviour. User-generated product information is abundant and readily available. This paper argues that user-generated content can be efficiently utilised for business intelligence using data science and develops an approach to demonstrate the methods and benefits of the different techniques.

Using Python Selenium, Beautiful Soup and various text mining approaches in R to access, retrieve and analyse user-generated content, we argue that (1) companies can extract information about the product attributes that matter most to consumers and (2) user-generated reviews enable the use of text mining results in combination with other demographic and statistical information (e.g. ratings) as an efficient input for competitive analysis.

The paper shows that combining different types of data (textual and numerical data) and applying and combining different methods can provide organisations with important business information and improve business performance.

The paper shows that combining different types of data (textual and numerical data) and applying and combining different methods can provide organisations with important business information and improve business performance.

The study makes several contributions to the marketing and management literature, mainly by illustrating the methodological advantages of text mining and accompanying statistical analysis, the different types of distilled information and their use in decision-making.