Search results

While prior work has focused on the importance of visual access and visual cues to targets of deception, this article highlights its importance to deceivers. We introduce a new approach for conceptualizing deception and distinguish between two types of lies according to the relative value to the deceiver of being able to monitor the target's reaction to the lie; deceivers telling monitoring‐dependent lies benefit significantly more from being able to monitor their target than do deceivers telling monitoring‐independent lies. We examine this distinction and its implications for the strategic use of deception, by manipulating visual access in a negotiation experiment with teleconference and videoconference media. We find consistent differences between deceivers use of and consequences of these two types of lies as a function of visual access. First, the use of monitoring‐dependent lies was significantly greater with visual access than without it, while the use of monitoring‐independent lies was unaffected by visual access. Second, consistent with our conceptu‐alization, participants who lied were trusted less by their counterpart than were participants who did not lie, except when participants with visual access told monitoring‐dependent lies. In these cases deceivers were actually trusted more by their counterpart than participants who did not lie. These results support our conceptualization and suggest that visual access may actually harm potential targets of deception—by increasing their risk of being deceived and inappropriately increasing their interpersonal trust.

This paper aims to address the problem of uncertain product quality in digital light processing (DLP) three-dimensional (3D) printing, a scheme is proposed to qualitatively estimate whether a layer is printed with the qualified quality or not cured .

A thermochromic pigment whose color fades at 45°C is prepared as the indicator and it is mixed with the resin. A visual surveillance framework is proposed to monitor the visual variation in a period of the entire curing process. The exposure region is divided into 30 × 30 sub-regions; gray-level variation curves (curing curves) in all sub-regions are classified as normal or abnormal and a corresponding printing control strategy is designed to improve the percentage of qualified printed objects.

The temperature variation caused by the releasing reaction heat on the exposure surface is consistent in different regions under the homogenized light intensity. The temperature in depth begins to rise at different times. The temperature in the regions near the light source rises earlier, and that far from the light source rises later. Thus, the color of resin mixed with the thermochromic pigment fades gradually over a period of the entire solidification process. The color variation in the regions with defects of bubbles, insufficient material filling, etc., is much different from that in the normal curing regions.

A temperature-sensitive organic chromatic chemical pigment is prepared to present the visual variation over a period of the entire curing process. A novel 3D printing scheme with visual surveillance is proposed to monitor the layer-wise curing quality and to timely stop the possible unqualified printing resulted from bubbles, insufficient material filling, etc.

To introduce chromatic methods and their application to monitoring complex systems.

Complexity is introduced and the need for holistic monitoring is suggested. The chromatic methodologies are introduced and their broad‐ranging applicability is illustrated with reference to a number of diverse applications.

The generic chromatic monitoring technology has much to offer as a way of visualising, understanding, monitoring and controlling complex processes and system behaviour.

The technology is leading to new ways of characterising and evaluating aspects of system behaviour, in a holistic and non‐intrusive manner, that are difficult to measure – e.g. walking behaviour of the elderly, tiredness of drivers.

Draws out the generic basis of the chromatic methodology and how it may be applied to a wide range of complex systems and situations to predict when and where human intervention is required.

The purpose of this paper is to explore the benefits of visual management (VM) systems in transportation construction projects in England.

Following a comprehensive literature review, the benefits of VM were investigated through action and case study research executed within two construction projects in England.

The main findings are: VM can contribute to increased self-management, better team coordination, better promises or an increasing plan percent complete, easier control for the management and improved workplace conditions in the transportation sector. It is important for the management to obtain the engagement of their workforce for VM through increased participation and show the actual benefits. However, managerial monitoring and control on the systems should not be underestimated.

The transportation sector in England has been systematically deploying Lean construction techniques in its operations for a while. One of those Lean techniques is a close-range visual communication strategy called VM. The literature on the VM implementation in construction is scarce and generally limited to the building construction context. This paper documents the benefits of VM systems for the transportation sector by using data captured through both qualitative and quantitative data collection methods. The paper also identifies a set of recommendations for similar research efforts in the transportation context in the future.

This paper presents a reflection on the effectiveness of using drones in the technical inspection of building facades, as a practical alternative to more expensive and heavier conventional means. In order to verify this assumption qualitatively, a number of field tests are presented and discussed.

The first stage consisted of a literature review. The analysis initially investigated drone technology. Then, an insight into some general applications in Civil Engineering was compiled, focusing in particular on the Construction Industry (CI), as well as the scope of building envelope inspections. In the second stage, field tests with drones were performed and the resulting data was appraised in order to get facade pathologies diagnosis as accurate as possible.

Through this study, the adaptability and versatility of using drones were checked. Thus, it has been confirmed that drone technology is an effective and promising alternative methodology to support technical inspection and diagnosis of building envelope pathologies. In fact, drones seem to be a worthwhile tool for supporting certain Civil Engineering activities–particularly when displaying a multirotor configuration, loading high-definition (HD) cameras, for both stills photography and video.

As the main goal of this approach was simply a qualitative assessment of evidence on the advantages of using drones compared with conventional means, other kinds of comparative analysis were not discussed in depth. However, this and other potential restrictive issues may represent an opportunity to push more developments. A deeper knowledge of data handling and clear procedures for the use of drones could be very valuable for the CI and for building envelope inspections.

In investigating this subject, this research can offer valuable input to enable a greater awareness of the use of drones in the technical inspection of buildings, particularly in hard-to-reach locations, to the detriment of conventional means. In these circumstances, this methodology can bring great benefits, particularly from an environmental impact point of view, since the resources used are much lower. In addition, a very reliable diagnosis can be achieved more quickly, and at a much lower cost.

The introduction of a standard for drone inspection practice is still at an early stage, with initial steps being taken in an apparently well-focused effort to achieve consolidation. Research studies of this kind may have an important role to play in drawing the stakeholders' attention to the benefits of using this technique, particularly for those working in the building usage phase.

The purpose of this paper is to investigate the effectiveness of mitigation measures adopted in a scheme of EIA follow-up by examining their performance in reducing geo-environmental impacts in earthwork activities during the Rodoanel southern section construction in São Paulo, Brazil. This environment is fragile in terms of affected watersheds because the highway crosses two important reservoirs that supply most of the metropolitan water demand. Therefore, this research also aims at promoting water quality control.

This study combines complementary sources as evidences in the literature and field checks, tests and monitoring. The methodology was supported by criteria for evaluating the effectiveness of mitigation measures in the case study approach.

The EIA follow-up activities contributed to the maintenance of environmental conditions in the majority of the control points at the end of the construction phase. Water quality parameters were not statistically different before and during the construction of the highway. The choice and arrangement of mitigation measures were successful in ensuring water quality control by avoiding siltation.

A robust scheme for designing and evaluating mitigation measures contributes to the improvement of their effectiveness and is pivotal to the success of the EIA follow-up.

This case study serves as an example for extending EIA follow-up practice in special to the improvement of the design and evaluation of mitigation measures in similar contexts.

In today's globally competitive environment, customers only want to pay for value‐added activity. They are not willing to pay for inefficiencies, such as those incurred through extra motion, or time spent searching for data, information, or tools. Although these wastes may be transparent to customers, they usually manifest themselves in the company's market share and bottom line. The purpose of this paper is to describe how the visual workplace helps increase efficiency by eliminating non‐value added activities. The visual workplace improves performance by providing information, enabling workers through self‐direction and empowerment to quickly make decisions without requiring oversight. While its practice in the office environment is increasing, it is still not as consistently practiced as it is in the manufacturing environment.

Utilizing benchmarking, a case study approach and analysis was conducted.

Visual workplace practices are very common in manufacturing environments. While the practices and usefulness are just as useful in business process environments, there is found to be a reluctance to fully embrace the practices.

The application of visual work practices requires business leaders to create, utilize, and support visual communication tools to manage their business. Its usage can be effectively applied to business processes to eliminate inefficiencies and decrease lost time.

The usefulness of visual workplace practices, once embraced by business leaders, will increase business performance by increasing efficiency and reducing waste.

Extends the concept of e‐service to the whole phase of manufacturing. Develops an e‐service platform prototype based on this concept with Java Web solution including the mobile agent broking technologies and application service provider (ASP) principle. The key point to implement the platform is to enable an open Web information service infrastructure for the whole product manufacturing chain. Inside this infrastructure, product‐specific online manufacturing system can be created by means of using a kind of bidding model. All users participating in the manufacturing process are able to cooperatively finish manufacturing tasks in real time through sharing the same platform. With the help of BOM flow, the global information service flow can be controlled easily. In addition, the legacy hardware/software can also be encapsulated with aglets that are Java mobile agents. As to new ASP software packages, they can be configured simply via the plug and play mode to the e‐service platform. In this way, the on‐line networked manufacturing can be tested.

Policies and practices of UK public libraries in providing access to Internet services are reviewed. Results of a questionnaire survey conducted as part of the Library and Information Commission funded PuPPS (public places, private spaces) scoping study of privacy, anonymity and confidentiality in public libraries, are reported. Ninety‐six per cent of respondents indicated that they had Internet facilities for the public. Many respondents indicated that they had policy documents on provision of and access to electronic and print materials. The majority of libraries (71 per cent) imposed some form of control on public access computers and a smaller majority (56 per cent) on staff only computers. The reliability and effectiveness of software currently available for filtering and blocking was a major cause for concern amongst respondents. The major reason for the imposition of control software appeared to be concern about access to sexually explicit material. The use of such software is frequently part of a broad corporate policy, designed to protect the local authority from adverse criticism by public or staff. Issues of privacy, anonymity and confidentiality were of lesser concern to public library respondents than control of public access to inappropriate material on the Internet.

This study aims to provide an ergonomic design of the monitoring room that has resulted in safe, functional and comfortable environment for the operators, which may lead to improve the efficiency. Currently, uses of closed‐circuit televisions to monitor the critical environments are widely applicable. The information is continuously transferred and analyzed through a center called monitoring room.

Here, through creating a systematic analysis, a series of experiments was performed initially to evaluate and then optimize the parameters such as illumination, visual angle, operator-screen distance, number of scenes display in a single screen, workstation height, screen dimension and monitoring time that may affect the visual skill of the operators. Taguchi orthogonal array was used to analyze the significance of parameters on operator’s response time to a threat. The five parameters were distinguished as significant. Later response surface methodology was utilized to optimize the parameters.

Quadratic empirical model developed for the response time exposes the optimum response time was achievable at illumination of 500 lux, visual angle of 13°, operator-screen distance of 60 cm, three scenes, workstation height of 120 cm, screen dimension of 34” and monitoring time of 15 min. This shortened the response time by 28 per cent. The adequacy of the fitted model was successfully verified using the confirmation test with α = 95 per cent.

The novelty of this work lies in the application of a systematic statistical analysis, which enables considering the interaction among the noise parameters and controllable one simultaneously. Furthermore, the obtained regression model can widely be used for adjusting the parameters accordingly based on various anthropometric data.