Search results

This paper aims to study the direct synthesis of imino methyl ether amino resin using commercially available formaldehyde, melamine and methanol through one-step two-stage catalysis.

Initially, melamine undergoes a reaction with formaldehyde to form hydroxylmethylation melamine in a basic setting. Subsequently, hydrochloric acid is incorporated to facilitate the etherification process. The study delves into the impact of various factors during the etherification phase, including the quantity of methanol, the temperature at which etherification occurs, the number of etherification cycles and the amount of catalyst used, on the synthesis of imino methyl-etherified amino resins. Ultimately, the most favorable conditions for etherification are identified through comparative analysis to evaluate the resulting synthesized products.

The methyl-etherified amino resin, characterized by a stable structure and consistent performance, was efficiently synthesized through a one-step, two-stage catalytic process. Optimal conditions for the etherification stage were determined to be a reaction temperature of 35°C, a melamine to methanol ratio of 1:24 and an addition of hydrochloric acid ranging from 2.2 mL to 2.5 mL. Remarkably, the resulting resin notably enhanced the water resistance, salt resistance and gloss of the canned iron printing varnish coatings.

Amino resins, known for their broad applications across numerous industries, face sustainability and operational efficiency hurdles when produced through traditional methods, which predominantly involve the use of a 37% formaldehyde solution. To tackle these issues, our research introduces an innovative method that add 37% formaldehyde to facilitate industrial production. The use of 37% liquid formaldehyde in this paper has two benefits: first, it is convenient for industrial application and production; Second, it is convenient to provide mild reaction conditions at lower concentrations because the amino group is relatively active, which is convenient for the preservation of the amino group and integrates it with a one-step, two-stage catalytic process. The primary objective of our study is threefold: to reduce the environmental footprint of amino resin synthesis, to optimize the use of resources and to improve the economic viability for its large-scale production. By employing this new strategy, we try to provide a more sustainable and efficient manufacturing process for amino resins.

This study aims to evaluate in situ oxidative polymerization of aniline (Ani) as a post-processing method to promote extrusion-based 3D printed parts, made from insulating polymers, to components with functional properties, including electrical conductivity and chemical sensitivity.

Extrusion-based 3D printed parts of polyethylene terephthalate modified with glycol (PETG) and polypropylene (PP) were coated in an aqueous acid solution via in situ oxidative polymerization of Ani. First, the feedstocks were characterized. Densely printed samples were then used to assess the adhesion of polyaniline (PAni) and electrical conductivity on printed parts. The best feedstock candidate for PAni coating was selected for further analysis. Last, a Taguchi methodology was used to evaluate the influence of printing parameters on the coating of porous samples. Analysis of variance and Tukey post hoc test were used to identify the best levels for each parameter.

Colorimetry measurements showed significant color shifts in PP samples and no shifts in PETG samples upon pullout testing. The incorporation of PAni content and electrical conductivity were, respectively, 41% and 571% higher for PETG in comparison to PP. Upon coating, the surface energy of both materials decreased. Additionally, the dynamic mechanical analysis test showed minimal influence of PAni over the dynamic mechanical properties of PETG. The parametric study indicated that only layer thickness and infill pattern had a significant influence on PAni incorporation and electrical conductivity of coated porous samples.

Current literature reports difficulties in incorporating PAni without affecting dimensional precision and feedstock stability. In situ, oxidative polymerization of Ani could overcome these limitations. However, its use as a functional post-processing of extrusion-based printed parts is a novelty.

This paper aims to control the deformation of a thin wall CrZrCu cylinder components (wall thickness 5 mm, diameter 400 mm) during thermal spray alumina-titania (AT13) coating by adjusting the spray parameters without deteriorating its quality evidently.

The deformation was controlled by lowering the temperature of the component in the way of adjusting the spray parameters. The main parameters adjust included extending the spraying distance, from normally 120 mm to 140 mm, decreasing plasma power from 50to 42 kW. An alumina-titanium (AT13) ceramic coating was chosen for protecting the substrate from corrosion. Microscopic morphology and phase analysis, insulation resistance testing, neutral salt test and electrochemical method were used to analyze the anti-corrosion and insulation performances of the coating.

The results indicate that, after adjusting the spraying parameters, the coating has a relatively high porosity, with an average value of 8.96 ± 0.77%. The bonding strength of the coating is relatively low, with an average value of 17.69 ± 0.85 MPa. However, after sealing, the polarization resistance of the coating in seawater can be maintained above 6.25 × 10⁶ Ω.cm² for an extended period. The coating has a high resistance (=1.1 M Ω), and there is no apparent galvanic corrosion when contacted with TC4 alloy. Additionally, analysis of corrosion products on the sample surface reveals that the samples with sprayed alumina-titanium ceramic show no copper corrosion products on the surface, and the coating remains intact, effectively isolating the corrosive medium.

By adjusting the spraying parameters, the deformation of the cylinder thin-walled component can be effectively controlled, making the φ 400 × 392 mm (thickness 5 mm) CrZrCu cylinder com-ponent with a maximum diameter deformation of only 0.14 mm. The satisfactory corrosion performances can be achieved under adjusting spraying parameters, which can guarantee the application of ceramic coating for weapon launching system of naval ships.

The use of polysaccharides increases solubility and consistency and causes functions such as viscosity? Moisture and food emulsifier stabilizer. This study aims to enrich the formulation of low-fat mozzarella cheese using microcoated vitamin D3 (VD3).

This study investigates the addition of hydrocolloids to low-fat mozzarella cheese to enhance its properties and nutritional value. Tests were conducted on cheese samples with 0.05% and 0.25% hydrocolloid concentrations at various stages: before production and at three and six months’ postproduction. The samples were evaluated for elasticity, pH and solubility to select the best one, which was then fortified with VD3. The vitamin was microencapsulated using alginate and whey protein to shield it from light and oxygen, optimizing the formula using the response surface method. The fortified cheese was tested for VD3 content over its shelf life.

Results indicated that all hydrocolloids tested improved moisture and meltability of the cheese while higher protein levels increased stretchability two to threefold. Rice starch hydrocolloid at 0.05% concentration was chosen due to superior sensory scores and minimal oil separation. This study concluded that VD3 levels remained stable during the cheese’s shelf life, suggesting that this approach could enhance the nutritional value of low-fat cheese without compromising its quality. Therefore, after examining the obtained results and comparing the regression models, the results indicated that the Quadratic model was chosen to investigate the effect of independent variables on the response rate, which had a statistically significant difference with other models (p = 0.0019). Also the results of the area under the curve and using the encapsulation efficiency equation, the percentage of microencapsulated vitamin was obtained, and according to the simulation results, the encapsulation efficiency was reported as 89.02%.

Developing innovative functional dairy products fortified with VD3 could improve the vitamin D status in deficient populations. Therefore, these designs can be applied at industrial scales for functional cheese production.

This study aims to investigate a chromium-free sealing treatment process to replace the chromate sealing process in response to the environmental hazards caused by chromate in the Phosphate chemical conversion (PCC) coating post-treatment sealing process.

In this paper, chromium-free sealing technology was used to post-treat PCC coatings. Scanning electron microscopy was used to investigate the structure of the surface of the PCC coatings after the sealing treatment, and the corrosion resistance, hydrophobicity and bonding were tested using an electrochemical workstation, a copper sulfate spot-drop test, a lacquer bonding test, a contact angle meter and a neutral salt spray test.

Chromium-free closure makes the grain distribution on the surface of the PCC coating more uniform and dense, and forms an organic film on the surface of the coating, which significantly improves the corrosion resistance and hydrophobicity of the PCC coating, does not affect the coating film bonding force and has similar performance with potassium dichromate solution.

The results show that the corrosion resistance of PCC coatings after chromium-free sealing treatment is improved, and chromium-free sealing has the potential to replace chromium sealing.

The aim was not to perform a systematic review but firstly to search in PubMed, Science Direct, Scopus and Web of Science databases on the papers published in the last five years using tools for reviewing the statement of preferred information item for systematic reviews without focusing on a randomized analysis and secondly to perform a bibliometric analysis on the properties of films and coatings added of tocopherol for food packaging.

On January 24, 2022, information was sought on the properties of films and coatings added of tocopherol for use as food packaging published in PubMed, Science Direct, Scopus and Web of Science databases. Further analysis was performed using bibliometric indicators with the VOSviewer tool.

The searches returned 33 studies concerning the properties of films and coatings added of tocopherol for food packaging, which were analyzed together for a better understanding of the results. Data analysis using the VOSviewer tool allowed a better visualization and exploration of these words and the development of maps that showed the main links between the publications.

In the area of food science and technology, the development of polymers capable of promoting the extension of the shelf life of food products is sought, so the knowledge of the properties is vital for this research area since combining a biodegradable polymeric material with a natural antioxidant active is of great interest for modern society since they associate environmental preservation with food preservation.

The purpose of this study is to produce a low-cost sheet metal forming mold made from the low melting point Bi58Sn42 (bismuth) alloy by using an open-source desktop-type material extrusion additive manufacturing system and to evaluate the performance of the additively manufactured mold for low volume sheet metal forming. Thus, it was aimed to develop a fast and inexpensive die tooling methodology for low-volume batch production.

Initially, the three-dimensional printing experiments were performed to produce the sheet metal forming mold. The encountered problems during the performed three-dimensional printing experiments were analyzed. Accordingly, both tunings in process parameters (extrusion temperature, extrusion multiplier, printing speed, infill percentage, etc.) and customizations on the extruder head of the available material extrusion additive manufacturing system were made to print the Bi58Sn42 alloy properly. Subsequently, the performance of the additively manufactured mold was evaluated according to the dimensional change that occurred on it during the performed pressing operations.

Results showed that the additively manufactured mold was rigid enough and proved to have sufficient strength in sheet metal forming operations for low-volume production.

Alternative mold production was carried out using open-source material extrusion system for low volume sheet metal part production. Thus, cost effective solution was presented for agile manufacturing.

The purpose of this paper is to investigate the friction and wear mechanisms in lubricated sliding conditions of additively manufactured SS316L parts. The different viscous oils 5W30, 15W40, 20W50 and SAE140 are used. These investigations provide a theoretical basis for the high performance of printed and postheattreated SS316L.

Tribological tests were carried out on selective laser melting-made SS316L printed specimens and heat-treated specimens. The parameters in 15 min of test duration are 20 N of load, 200 rpm, 8 mm of pin diameter, 25 mm length, 80 mm of track diameter and EN31 counter disc body. This work presented the phenomena of lubrication regimes and their characterization, as identified by the Stribeck curve, and these regimes affect the tribological properties of additively manufactured SS316L under the influence of industrial viscous lubricants. The results are observed using Scanning electron microscope (SEM), X-ray diffraction (XRD) and wear tests.

The observations indicate that additively manufactured SS316L shows a reduced coefficient of friction (COF) and specific wear rate (SWR). This is credited to the utilization of different viscous lubricants.

This exclusive research demonstrates how various viscous lubricants affect the COF and SWR of printed and post-heat-treated SS316L parts. Lambda (λ), lubricant film thickness (h₀), surface roughness and wear mechanisms are studied and reported.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0110/

Thermal energy storage systems use thermal energy to elevate the temperature of a storage substance, enabling the release of energy during a discharge cycle. The storage or retrieval of energy occurs through the heating or cooling of either a liquid or a solid, without undergoing a phase change, within a sensible heat storage system. In a sensible packed bed thermal energy storage system, the structure comprises porous media that form the packed solid material, while fluid occupies the voids. Thus, a cavity, partially filled with a fluid layer and partially with a saturated porous layer, has become important in the investigation of natural convection heat transfer, carrying significant relevance within thermal energy storage systems. Motivated by these insights, the current investigation delves into the convection heat transfer driven by buoyancy and entropy generation within a partially porous cavity that is differentially heated, vertically layered and filled with a hybrid nanofluid.

The investigation encompasses two distinct scenarios. In the first instance, the porous layer is positioned next to the heated wall, while the opposite region consists of a fluid layer. In the second case, the layers switch places, with the fluid layer adjacent to the heated wall. The system of equations for fluid and porous media, along with appropriate initial and boundary conditions, is addressed using the finite difference method. The Tiwari–Das model is used in this investigation, and the viscosity and thermal conductivity are determined using correlations specific to spherical nanoparticles.

Comprehensive numerical simulations have been performed, considering controlling factors such as the Darcy number, nanoparticle volume fraction, Rayleigh number, bottom slit position and Hartmann number. The visual representation of the numerical findings includes streamlines, isotherms and entropy lines, as well as plots illustrating average entropy generation and the average Nusselt number. These representations aim to provide insight into the influence of these parameters across a spectrum of scenarios.

The computational outcomes indicate that with an increase in the Darcy number, the addition of 2.5% magnetite nanoparticles to the GO nanofluid results in an enhanced heat transfer rate, showing increases of 0.567% in Case 1 and 3.894% in Case 2. Compared with Case 2, Case 1 exhibits a 59.90% enhancement in heat transfer within the enclosure. Positioning the porous layer next to the partially cooled wall significantly boosts the average total entropy production, showing a substantial increase of 11.36% at an elevated Rayleigh number value. Positioning the hot slit near the bottom wall leads to a reduction in total entropy generation by 33.20% compared to its placement at the center and by 33.32% in comparison to its proximity to the top wall.

Polymer laser powder bed fusion (PBF-LB/P) is an additive manufacturing technology that is sustainable due to the possibility of recycling the powder multiple times and allowing the fabrication of gears without the aid of support structures and subsequent assembly. However, there are constraints in the process that negatively affect its adoption compared to other additive technologies such as material extrusion to produce gears. This study aims to demonstrate that it is possible to overcome the problems due to the physics of the process to produce accurate mechanism.

Technological aspects such as orientation, wheel-shaft thicknesses and degree of powder recycling were examined. Furthermore, the evolving tooth profile was considered as a design parameter to provide a manufacturability map of gear-based mechanisms.

Results show that there are some differences in the functioning of the gear depending on the type of powder used, 100% virgin or 50% virgin and 50% recycled for five cycles. The application of a groove on a gear produced with 100% virgin powder allows the mechanism to be easily unlocked regardless of the orientation and wheel-shaft thicknesses. The application of a specific evolutionary profile independent of the diameter of the reference circle on vertically oriented gears guarantees rotation continuity while preserving the functionality of the assembled mechanism.

In the literature, there are various studies on material aging and reuse in the PBF-LB/P process, mainly focused on the powder deterioration mechanism, powder fluidity, microstructure and mechanical properties of the parts and process parameters. This study, instead, was focused on the functioning of gears, which represent one of the applications in which this technology can have great success, by analyzing the two main effects that can compromise it: recycled powder and vertical orientation during construction.