Search results

This paper describes the effect of factors on the strength characteristics of cement treated clay from laboratory tests performed on cement mixed clay specimens. It is considered that several factors such as soil type, sample preparing method, quantity of binder, curing time, etc. can have an effect on strength characteristics of cement stabilized clay. A series of unconfined compression tests have been performed on samples prepared with different conditions. The results indicated that soil type, mixing method, curing time, dry weight ratio of cement to clay (Aw), and water‐clay to cement (wc/c) ratio were main factors which can have an influence on unconfined compressive strength, modulus of elasticity, and failure strain of cement stabilized clay. Unconfined compressive strength of soil‐cement samples prepared from dry mixing method was higher than those prepared from wet mixing method.

Reinforced lightweight soil (RLS) consisting of dredged soil, cement, air‐foam, and waste fishing net is considered to be an eco‐friendly backfilling material because it provides a means to recycle both dredged soil and waste fishing net. It may be difficult to find an optimum mixing ratio of RLS considering the design criteria and the construction's situation using the limited test results because the unconfined compressive strength is complicatedly influenced by various mixing ratios of admixtures. As a result, in order to expedite the field application of RLS, an appropriate prediction method is needed. The paper aims to address these issues.

In this study, an artificial neural network (ANN) model that was based on experimental test results performed on various mixing ratios, was developed to predict the unconfined compressive strength of RLS.

It was found that the unconfined compressive strength of RLS at a given mixing ratio could be reasonably estimated using the developed neural network model. In addition, sensitivity analysis was also conducted to evaluate the effect of mixing conditions on the compressive strength of RLS.

RLS is considered to be environmentally friendly because it provides a means to recycle both dredged soil and waste fishing net. The contractors could use the proposed ANN model as an alternative method to predict the strength of RLS with a specific mixing ratio.

This paper reveals that the developed ANN model can be served as a simple and reliable predictive tool for the strength of RLS without excessive laboratory tests for various admixture contents. An optimum admixture ratio of composed materials to get a designed strength could be easily found by using the proposed ANN model.

The coal-based synthetic natural gas slag (CSNGS) is a solid waste remaining from the incomplete combustion of raw coal to produce gas. With the continuous promotion of efficient and clean utilization of coal in recent years, the stockpiling of CSNGS would increase gradually, and it would have significant social and environmental benefits with reasonable utilization of CSNGS. This study prepared a new geopolymer by mixing CSNGS with PC42.5 cement in a certain mass ratio as the precursor, with sodium hydroxide and sodium silicate solution as the alkali activators.

The formulation of coal-based synthetic natural gas slag geopolymer (CSNGSG) was determined by an orthogonal test, and then the strength mechanism and microstructure of CSNGSG were characterized by multi-scale tests.

The results show that the optimum ratio of CSNGSG was a sodium silicate modulus of 1.3, an alkali dosage of 21% and a water cement ratio of 0.36 and the maximum unconfined compressive strength of CSNGSG at 7 d was 26.88 MPa. The increase of curing temperature could significantly improve the compressive strength of CSNGSG, and the curing humidity had little effect on the compressive strength of CSNGSG. The development of the internal strength of CSNSG at high temperatures consumed SiO₂, Al₂O₃ and CaO and the intensity of corresponding crystalline peaks decreased.

Moreover, the vibration of chemical bonds in different wavenumbers also revealed the reaction mechanism of CSNSG from another perspective. Finally, the relevant test results indicated that CSNGS had practical application value as a raw material for the preparation of geopolymer cementing materials.

Industrial wastes such as copper slag and fly ash are being generated in tons every year and disposed mainly by land fillings, resulting in wastage of useful land. Copper slag in itself is a granular cohesionless sand-like material, while fly ash is highly pozzolanic. The purpose of this paper is to investigate copper slag and fly ash mixes with cement as stabilizer for their proper use in road construction.

Different trial mixes of copper slag and fly ash were tested for obtaining the optimum mix having maximum dry density. Cylindrical specimens were prepared using optimum mix with different proportion of cement (3, 6 and 9 per cent) and cured for period of 7, 14 and 28 days in desiccator. Several tests such as proctor test, unconfined compressive strength test, splitting tensile strength test and soaked CBR test were carried out.

After analyzing the variation of test results with varying cement content and curing period, maximum compressive strength of 10 MPa and maximum tensile strength of 1.5 MPa was found for specimen having 9 per cent cement content cured for a period of 28 days. It was concluded that copper slag and fly ash when mixed in optimum proportion and stabilized with 6 and 9 per cent cement can be effectively used as granular material in sub base and base layer of road pavement.

A typical flexible pavement section was designed and checked using IITPAVE software which gave desired results. This paper may add value in the areas of pavement design, waste utilization, etc.

Advanced fibre-reinforced polymer (FRP) composites have been increasingly used over the past two decades for strengthening, upgrading and restoring degraded civil engineering infrastructure. Substantial experimental investigations have been conducted in recent years to understand the compressive behaviour of FRP-confined concrete columns. A considerable number of confinement models to predict the compressive behaviour of FRP-strengthened concrete columns have been developed from the results of these experimental investigations. The purpose of this paper is to present a comprehensive review of experimental investigations and theoretical models of circular and non-circular concrete columns confined with FRP reinforcement.

The paper reviews previous experimental test results on circular and non-circular concrete columns confined with FRP reinforcement under concentric and eccentric loading conditions and highlights the behaviour and mechanics of FRP confinement in these columns. The paper also reviews existing confinement models for concrete columns confined with FRP composites in both circular and non-circular sections.

This paper demonstrates that the performance and effectiveness of FRP confinement in concrete columns have been extensively investigated and proven effective in enhancing the structural performance and ductility of strengthened columns. The strength and ductility enhancement depend on the number of FRP layers, concrete compressive strength, corner radius for non-circular columns and intensity of load eccentricity for eccentrically loaded columns. The impact of existing theoretical models and directions for future research are also presented.

Potential researchers will gain insight into existing experimental and theoretical studies and future research directions.

This paper presents the details of a research study on developing composite masonry blocks using two types of mixes, conventional and lightweight mix, to enhance their fire/bushfire resistance and residual compressive strength.

Composite masonry blocks (390 × 190 × 90 mm) were fabricated using conventional cement–sand mix as the outer layer and lightweight cement–sand–diatomite mix as the inner layer. Material properties were determined, and all the mixes were proportioned by the absolute volume method. After 28 days of curing, density tests, compression tests before and after fire exposure and fire resistance tests of the developed blocks were conducted, and the results were compared with those of conventional cement–sand and cement–sand–diatomite blocks.

Developed composite blocks satisfy density and compressive strength requirements for loadbearing lightweight solid masonry units. Fire resistance of the composite block is –/120/120, and no cracks appeared on the ambient side surface of the block after 3 h of fire exposure. Residual strength of the composite block is higher compared to cement–sand and cement–sand–diatomite blocks and satisfies the loadbearing solid masonry unit strength requirements.

Composite block developed in this research can be suggested as a suitable loadbearing lightweight solid masonry block for several applications in buildings in bushfire prone areas.

Limited studies are available for composite masonry blocks in relation to their fire resistance and residual strength.

The purpose of this study is to measure the effects of density, moisture, fiber content on unconfined compressive strength (UCS) of soil by formulating the models based on evolutionary approach and artificial neural networks (ANN).

The present work proposes evolutionary approach of multi-gene genetic programming (MGGP) to formulate the functional relationships between UCS of reinforced soil and four inputs (soil moisture, soil density, fiber content and unreinforced soil strength) of the silty sand. The hidden non-linear relationships between UCS of reinforced soil and the four inputs are determined by sensitivity and parametric analysis of the MGGP model.

The performance of MGGP is compared to those of ANN and the statistical analysis indicates that the MGGP model is the best and is able to generalize the UCS of reinforced soil satisfactorily beyond the given input range.

The explicit MGGP model will be useful to provide optimum input values for design and analysis of various geotechnical infrastructures. In addition, utilization of Water hyacinth reinforced fiber reinforced soil will minimize negative impact of this species on environment and may generate rural employment.

This work is first of its kind in application and development of explicit holistic model for evaluating the compressive strength of heterogeneous soil blinded with fiber content. This includes the experimental and cross-validation for testing robustness of the model.

The purpose of this paper is to evaluate the possible use of oil shale as a soil stabilizing agent for expansive soils.

An experimental work has been fulfilled to investigate the influence of oil shale ash (OSA) on the geotechnical behavior of the expansive soil of Irbid, Jordan. Three swelling-shrinkage soils were considered in this study along with various percentages of OSA varying at 2, 4, 6, 8, 10 and 12 per cent by dry weight of the soil. A series of laboratory tests were conducted on the soil samples before and after mixing it with OSA. These tests were soil classification, Atterberg limits, compaction test, falling head permeability test, unconfined compression test, free swelling, swelling pressure and California bearing ratio (CBR) test.

Laboratory tests results indicated that OSA is effective in improving the texture and strength of the treated soil by reducing plasticity index, swelling potential and swelling pressure and moderately enhancing soil strength properties including the unconfined compressive strength (q_u), maximum dry unit weight (γ_d-max.) and CBR test.

OSA showed potential as a low-cost soil stabilizing agent for swell-shrink soils.

This study aims to investigate the optimum proportion of coconut fibre and cement suitable for rammed earth wall construction. Coconut fibres and cement can be easily incorporated into the soil mixture which adds strength and durability to the wall. This paper highlights the salient observations from a systematic investigation on the effect of coconut fibre on the performance of stabilized rammed earth blocks.

Stabilization of soil was done by adding Ordinary Portland Cement (2.5, 5.0, 7.5 and 10.0 per cent by weight of soil), whereas coconut fibre in length about 15 mm was added (0.2, 0.4, 0.6, 0.8 and 1.0 per cent by weight of soil) as reinforcement. Thirty types of mixes were created by adding different proportions of cement and fibre to locally available soil and compacting the mix at constant compaction energy in three layers with Proctor rammer.

Samples were tested for compressive strength and tensile strength, and failure patterns were analysed. The use of cement and fibre increases ultimate strengths significantly up to an optimum limit of 0.8 per cent fibre content, provides a secondary benefit of keeping material bound together after failure and increases residual strength. Benefits of fibre reinforcement includes both improved ductility in comparison with raw blocks and inhibition of crack propagation after its initial formation.

After analysing the results, it is recommended to use 0.8 per cent fibre and 5-10 per cent cement by weight of soil to achieve considerable strength. This research may add a value in the areas of green and sustainable housing, waste utilization, etc.

This paper aims to study the residual test results under uni-axial compression of tie confined pre-damaged normal strength concrete short columns subjected to elevated temperatures.

The test variables included temperature of exposure, spacing of transverse confining reinforcement and pre-damage level. An experimental program was designed and carried out involving testing of hoop confined concrete cylindrical specimens exposed to elevated temperatures ranging from room temperature to 900 °C.

The test results indicate that the residual strength, strain corresponding to the peak stress and the post-peak strains of confined concrete are not affected significantly up to an exposure temperature of 300 °C. However, the peak confined stress falls and the corresponding strain increase considerably in the temperature range of 600 to 900 °C. It is shown that an increase in the degree of confinement reinforcement results in an increased residual strength and deformability of pre-damaged confined concrete.

It is applicable in finding the residual strength and strain of the pre-damaged confined concrete in uni-axial compression after exposure to elevated temperature.

The practical implications is that the test result is applicable in finding the residual strengths of pre-damaged confined concrete under uni-axial compression after exposure to elevated temperature.

The main aim of the present investigation is to provide experimental data on the residual behaviour of pre-damaged confined concrete subjected to high temperatures.

The results of this study may be useful for developing the guidelines for designing the confinement reinforcement of reinforced concrete columns against the combined actions of earthquake and fire, as well as for designing the retrofitting schemes after these sequential disasters.