Search results

The purpose of the study is to quickly identify significant heterogeneity of surrounding rock of tunnel face that generally occurs during the construction of large-section rock tunnels of high-speed railways.

Relying on the support vector machine (SVM)-based classification model, the nominal classification of blastholes and nominal zoning and classification terms were used to demonstrate the heterogeneity identification method for the surrounding rock of tunnel face, and the identification calculation was carried out for the five test tunnels. Then, the suggestions for local optimization of the support structures of large-section rock tunnels were put forward.

The results show that compared with the two classification models based on neural networks, the SVM-based classification model has a higher classification accuracy when the sample size is small, and the average accuracy can reach 87.9%. After the samples are replaced, the SVM-based classification model can still reach the same accuracy, whose generalization ability is stronger.

By applying the identification method described in this paper, the significant heterogeneity characteristics of the surrounding rock in the process of two times of blasting were identified, and the identification results are basically consistent with the actual situation of the tunnel face at the end of blasting, and can provide a basis for local optimization of support parameters.

The microseismic monitoring technique has great advantages on identifying the location, extent and the mechanism of damage process occurring in rock mass. This study aims to analyze distribution characteristics and the evolution law of excavation damage zone of surrounding rock based on microseismic monitoring data.

In situ test using microseismic monitoring technique is carried out in the large-span transition tunnel of Badaling Great Wall Station of Beijing-Zhangjiakou high-speed railway. An intelligent microseismic monitoring system is built with symmetry monitoring point layout both on the mountain surface and inside the tunnel to achieve three-dimensional and all-round monitoring results.

Microseismic events can be divided into high density area, medium density area and low density area according to the density distribution of microseismic events. The positions where the cumulative distribution frequencies of microseismic events are 60 and 80% are identified as the boundaries between high and medium density areas and between medium and low density areas, respectively. The high density area of microseismic events is regarded as the high excavation damage zone of surrounding rock, which is affected by the grade of surrounding rock and the span of tunnel. The prediction formulas for the depth of high excavation damage zone of surrounding rock at different tunnel positions are given considering these two parameters. The scale of the average moment magnitude parameters of microseismic events is adopted to describe the damage degree of surrounding rock. The strong positive correlation and multistage characteristics between the depth of excavation damage zone and deformation of surrounding rock are revealed. Based on the depth of high excavation damage zone of surrounding rock, the prestressed anchor cable (rod) is designed, and the safety of anchor cable (rod) design parameters is verified by the deformation results of surrounding rock.

The research provides a new method to predict the surrounding rock damage zone of large-span tunnel and also provides a reference basis for design parameters of prestressed anchor cable (rod).

Large displacement misalignment under the action of active faults can cause complex three-dimensional deformation in subway tunnels, resulting in severe damage, distortion and misalignment. There is no developed system of fortification and related codes to follow. There are scientific problems and technical challenges in this field that have never been encountered in past research and practices.

This paper adopted a self-designed large-scale active fault dislocation simulation loading system to conduct a similar model test of the tunnel under active fault dislocation based on the open-cut tunnel project of the Urumqi Rail Transit Line 2, which passes through the Jiujiawan normal fault. The test simulated the subway tunnel passing through the normal fault, which is inclined at 60°. This research compared and analyzed the differences in mechanical behavior between two types of lining section: the open-cut double-line box tunnel and the modified double-line box arch tunnel. The structural response and failure characteristics of the open-cut segmented lining of the tunnel under the stick-slip part of the normal fault were studied.

The results indicated that the double-line box arch tunnel improved the shear and longitudinal bending performance. Longitudinal cracks were mainly distributed in the baseplate, wall foot and arch foot, and the crack position was basically consistent with the longitudinal distribution of surrounding rock pressure. This indicated that the longitudinal cracks were due to the large local load of the cross-section of the structure, leading to an excessive local bending moment of the structure, which resulted in large eccentric failure of the lining and formation of longitudinal cracks. Compared with the ordinary box section tunnel, the improved double-line box arch tunnel significantly reduced the destroyed and damage areas of the hanging wall and footwall. The damage area and crack length were reduced by 39 and 59.3%, respectively. This indicates that the improved double-line box arch tunnel had good anti-sliding performance.

This paper adopted a self-designed large-scale active fault dislocation simulation loading system to conduct a similar model test of the tunnel under active fault dislocation. This system increased the similarity ratio of the test model, improved the dislocation loading rate and optimized the simulation scheme of the segmented flexible lining and other key factors affecting the test. It is of great scientific significance and engineering value to investigate the structure of subway tunnels under active fault misalignment, to study its force characteristics and damage modes, and to provide a technical reserve for the design and construction of subway tunnels through active faults.

Uncertainty, a state of unknowing linked to threats and opportunities, is a key characteristic of megaprojects, making it challenging for government officials and politicians to decide on their initiation. For them, implementation by the private sector adds an extra layer of complexity and uncertainty to megaproject planning. In this context, only a few studies have focussed on governing and the mobilization of uncertainty arguments in communication between government actors and private developers either in favour of or against megaprojects. The purpose of this article is to shed light on how private megaproject proposals progress towards political acceptance or rejection in public decision-making.

This process of public decision-making on private megaproject proposals is examined in the case of the Helsinki–Tallinn undersea rail tunnel. In line with the interpretive research tradition, the authors’ study draws on a qualitative methodology underpinned by social constructionism. The research process can be characterized as abductive.

The authors’ findings suggest that while public decision-making on megaprojects is a conflictual and dynamic process, some types of uncertainty are relatively more important in affecting the perceived feasibility of the projects in the eyes of public sector decision-makers.

This study contributes to the debate on uncertainty management in megaprojects, proposing a new type of uncertainty – uncertainty about privateness – which has not been explicitly visible thus far.

This study aims to research the large cross-section tunnel stability evaluation method corrected after considering the thickness-span ratio.

First, taking the Liuyuan Tunnel of Huanggang-Huangmei High-Speed Railway as an example and taking deflection of the third principal stress of the surrounding rock at a vault after tunnel excavation as the criterion, the critical buried depth of the large section tunnel was determined. Then, the strength reduction method was employed to calculate the tunnel safety factor under different rock classes and thickness-span ratios, and mathematical statistics was conducted to identify the relationships of the tunnel safety factor with the thickness-span ratio and the basic quality (BQ) index of the rock for different rock classes. Finally, the influences of thickness-span ratio, groundwater, initial stress of rock and structural attitude factors were considered to obtain the corrected BQ, based on which the stability of a large cross-section tunnel with a depth of more than 100 m during mechanized operation was analyzed. This evaluation method was then applied to Liuyuan Tunnel and Cimushan No. 2 Tunnel of Chongqing Urban Expressway for verification.

This study shows that under different rock classes, the tunnel safety factor is a strict power function of the thickness-span ratio, while a linear function of the BQ to some extent. It is more suitable to use the corrected BQ as a quantitative index to evaluate tunnel stability according to the actual conditions of the site.

The existing industry standards do not consider the influence of buried depth and span in the evaluation of tunnel stability. The stability evaluation method of large section tunnel considering the correction of overburden span ratio proposed in this paper achieves higher accuracy for the stability evaluation of surrounding rock in a full or large-section mechanized excavation of double line high-speed railway tunnels.

This paper aims to provide top-level design and basic platform for intelligent application in China high-speed railway.

Based on the analysis for the future development trends of world railway, combined with the actual development needs in China high-speed railway, The definition and scientific connotation of intelligent high-speed railway (IHSR) are given at first, and then the system architecture of IHSR are outlined, including 1 basic platform, 3 business sectors, 10 business fields, and 18 innovative applications. At last, a basic platform with cloud edge integration for IHSR is designed.

The rationality, feasibility and implementability of the system architecture of IHSR have been verified on and applied to the Beijing–Zhangjiakou high-speed railway, providing important support for the construction and operation of the world’s first IHSR.

This paper systematically gives the definition and connotation of the IHSR and put forward the system architecture of IHSR for first time. It will play the most important role in the design, construction and operation of IHSR.

On shield tunnel construction (STC) site, human error is widely recognized as essential to accident. It is necessary to explain which factors lead to human error and how these factors can influence human performance. Human reliability analysis supports such necessity through modeling the performance shaping factors (PSFs). The purpose of this paper is to establish and validate a PSF taxonomy for the STC context.

The approach taken in this study mainly consists of three steps. First, a description of the STC context is proposed through the analysis of the STC context. Second, the literature which stretch across the PSF methodologies, cognitive psychology and human factors of STC and other construction industries are reviewed to develop an initial set of PSFs. Finally, a final PSF set is modified and validated based on STC task analysis and STC accidents cases.

The PSF taxonomy constituted by 4 main components, 4 hierarchies and 85 PSFs is established for human behavior modeling and simulation under the STC context. Furthermore, by comparing and evaluating the performance of STC PSF and existing PSF studies, the proposed PSF taxonomy meets the requirement for qualitative and quantitative analysis.

The PSF taxonomy can provide a basis and support for human behavior modeling and simulation under the STC context. Integrating PSFs into a behavior simulation model provides a more realistic and integrated assessment of human error by manifesting the influence of each PSFs on the cognitive processes. The simulation results can suggest concrete points for the improvement of STC safety management.

This paper develops a taxonomy of PSFs that addresses the various unique influences of the STC context on human behaviors. The harsh underground working conditions and diverse resources of system information are identified as key characteristics of the STC context. Furthermore, the PSF taxonomy can be integrated into a human cognitive behavior model to predict the worker’s behavior on STC site in future work.

Major incidents in tunnel environment will pose several challenges for the emergency service organisations in terms of heat, visibility and lack of experiences from working in confined environments. These aspects, in turn, could pose challenges to establish collaboration. This study aims to contribute to the field of collaborative tunnel responses by exploring how “common knowledge” (Edwards, 2011) is built by the emergency services organisations, that is, what the organisations consider important while working on a potentially common problem, and their motives for the interpretations and actions if a major tunnel incident occurs.

Participants from the road traffic control centre, emergency dispatch centre, emergency medical service, rescue service and police were included in the study. Data from four focus group sessions was analysed using thematic analysis.

The study revealed that the tunnel environment presents specific aspects of how common knowledge was produced related to lifesaving and safety. The themes structuring mechanisms to reduce uncertainty, managing information for initial priorities, aligning responsibilities without hampering each other's work and adjusting actions to manage distance, illustrated how common knowledge was produced as crucial aspects to a collaborative response. Organising management sites, grasping and communicating risks, accessing the injury victims, was challenged by the confined environment, physical distances and imbalance in access to information and preparedness activities in tunnel environments.

This study offers new insights of common knowledge, by illustrating a motive perspective on collaborative responses in tunnel incidents. Creating interoperability calls not just for readiness for action and tunnel safety, but also training activities acknowledging different interpretations and motives to further develop tunnel responses.

The purpose of this paper aims to design an optimization control for tunnel boring machine (TBM) based on geological identification. For unknown geological condition, the authors need to identify them before further optimization. For fully considering multiple crucial performance of TBM, the authors establish an optimization problem for TBM so that it can be adapted to varying geology. That is, TBM can operate optimally under corresponding geology, which is called geology-adaptability.

This paper adopted k-nearest neighbor (KNN) algorithm with modification to identify geological conditions. The modification includes adjustment of weights in voting procedure and similarity distance measurement, which at suitable for engineering and enhance accuracy of prediction. The authors also design several key performances of TBM during operation, and built a multi-objective function. Further, the multi-objective function has been transformed into a single objective function by weighted-combination. The reformulated optimization was solved by genetic algorithm in the end.

This paper provides a support for decision-making in TBM control. Through proposed optimization control, the advance speed of TBM has been enhanced dramatically in each geological condition, compared with the results before optimizing. Meanwhile, other performances are acceptable and the method is verified by in situ data.

This paper fulfills an optimization control of TBM considering several key performances during excavating. The optimization is conducted under different geological conditions so that TBM has geological-adaptability.