Search results

The relationship between industrial policy and exploratory innovation is imperfect.

The authors use Chinese high-tech enterprise identification policy (HTEP) as a natural experimental group to test policy impacts, spillover effects and mechanisms of action.

First, HTEP promotes exploratory innovation. In addition, HTEP has a greater impact on non-exploratory innovation. Second, HTEP has spillover effects in two phases: HTEP (2008) and the 2016 policy reform. HTEP affects exploratory innovation in nearby non-high-tech firms, and the policy effect decreases monotonically with increasing distance from the treatment group. Third, HTEP affects innovation capacity through financing constraints, technical personnel flow and knowledge flow, which explains not only policy effects but also spillover effects. Fourth, the analysis of policy heterogeneity shows that the 2016 policy reforms reinforce the positive effect of HTEP (2008). By deducting the effects of other policies, the HTEP effect is found to be less volatile. In terms of the continuity of policy identification, continuous uninterrupted identification has a crucial impact on the improvement of firms’ innovation capacity compared to repeated certification and certification expiration. Finally, HTEP has a crowding-out effect in state-owned enterprises and large firms’ innovation.

This paper contributes to the existing literature in several ways. First, the authors enrich the literature on industrial policy through exploratory innovation research. While previous studies have focused on R&D investment and patents (Dai and Wang, 2019), exploratory innovation helps firms break away from the inherent knowledge mindset and achieve sustainable innovation. Second, few studies have explored the characteristics of industrial policies. In this paper, the authors subdivide the sample into repeated certification, continuous certification and certification expiration according to high-tech enterprise identification. In addition, the authors compare the differences in policy implementation effects between the 2016 policy reform and the 2008 policy to provide new directions for business managers and policy makers. Third, innovation factors guided by industrial policies may cluster in specific regions, which in turn manifest externalities. This is when the policy spillover effect is worth considering. This paper fills a gap in the industrial policy literature by examining the spillover effects. Finally, this paper also explores the mechanisms of policy effects from three perspectives: financing constraints, technician mobility and knowledge mobility, which can affect not only the innovation of beneficiary firms directly but also indirectly the innovation of neighboring non-beneficiary firms.

A debate on whether new ventures should be supported with public funding is taking place. Adopting a position on this discussion requires rigorous assessments of implemented programs. However, the few existing efforts have mostly focused on regional cases in developed countries. To fill this gap, this paper aims to measure the effects of a regional acceleration program in a developing country (Medellin, Colombia).

The economic notion of capabilities is used to frame the analysis of firm characteristics and productivity, which are hypothesized to be heterogeneous within the program. To test these relationships, propensity score matching is used in a sample of 60 treatment and 16,994 control firms.

This paper finds that treated firms had higher revenue than propensity score-matched controls on average, confirming a positive impact on growth measures. However, such financial growth is mostly observed in service firms rather than other economic sectors.

Further evaluations, with a longer period and using more outcome variables, are suggested in the context of similar publicly funded programs in developing countries.

These findings tip the balance in favor of the literature suggesting supportive programs for high-growth firms as opposed to everyday entrepreneurship. This is an insight, especially under the context of an emerging economy, which has scarce funding to support entrepreneurship.

The metallic alloys and their components fabricated via laser powder bed fusion (LPBF) suffer from the microvoids formed inevitably due to the extreme solidification rate during fabrication, which are impossible to be removed by heat treatment. This paper aims to remove those microvoids in as-built AlSi10Mg alloys by hot forging and enhance their mechanical properties.

AlSi10Mg samples were built using prealloyed powder with a set of optimized LPBF parameters, viz. 350 W of laser power, 1,170 mm/s of scan speed, 50 µm of layer thickness and 0.24 mm of hatch spacing. As-built samples were preheated to 430°C followed by immediate pressing with two different thickness reductions of 10% and 35%. The effect of hot forging on the microstructure was analyzed by means of X-ray diffraction, scanning electron microscopy, electron backscattered diffraction and transmission electron microscopy. Tensile tests were performed to reveal the effect of hot forging on the mechanical properties.

By using hot forging, the large number of microvoids in both as-built and post heat-treated samples were mostly healed. Moreover, the Si particles were finer in forged condition (∼150 nm) compared with those in heat-treated condition (∼300 nm). Tensile tests showed that compared with heat treatment, the hot forging process could noticeably increase tensile strength at no expense of ductility. Consequently, the toughness (integration of tensile stress and strain) of forged alloy increased by ∼86% and ∼24% compared with as-built and heat-treated alloys, respectively.

Hot forging can effectively remove the inevitable microvoids in metals fabricated via LPBF, which is beneficial to the mechanical properties. These findings are inspiring for the evolution of the LPBF technique to eliminate the microvoids and boost the mechanical properties of metals fabricated via LPBF.

The purpose of this paper is to examine the adoption of Islamic finance products (murabaha, musharakah, mudarabah, salam, ijara, istisna and Qard Hassan) by small and medium-sized enterprises (SMEs) in Cameroon, a non-Islamic Sub-Saharan African country.

It used primary data collected from a cross-section of 1,358 SMEs in eight regions of Cameroon using self-administered structured questionnaires. To facilitate the analyses and interpretation, these products are grouped into four groups based on certain characteristics. A multivariate probit model is estimated to take into account the interaction between these different Islamic finance products.

This study revealed that the desire to comply with Sharia law, awareness, attitude and intention were critical determinants of the decision to adopt Islamic finance products by Cameroonian SMEs. The least influential factors were perceived behavioral control, subjective norms, enterprise characteristics (size, age and location) and socio-demographic characteristics of the entrepreneur (gender, age and marital status). The extension of the multivariate approach permitted us to compute for predicted probabilities which revealed that there exists a synergy effect between the different Islamic finance products. That is, Cameroonian SMEs combine different Islamic finance products at the same time based on their needs. This is especially the case between the partnership-based products (musharakah and mudarabah) and manufacture/rent products (istisna and ijara).

Policymakers are encouraged to develop stakeholder-oriented strategies to promote effective consumer education in Islamic finance products which will boost awareness. Also, Islamic finance institutions should endeavor to develop innovative financial products that are Sharia-compliant and economically beneficial to the individual and business needs of SMEs. Moreover, policymakers and management of Islamic finance institutions should ensure the putting in place of effective governance structures to guide Islamic finance operations. Finally, policymakers should endeavor to take into account the possible synergy between the different Islamic finance products in their quest to develop this activity.

To the best of the authors’ knowledge, this is the first study that analyses the adoption of different Islamic finance products while taking into account the possible synergy that exists between these products.

Many European countries suspended mandatory conscription after the Cold War, and especially between 2000 and 2010. However, with the changing security situation in Europe, more and more countries are considering the re-introduction of the draft. That is why, it is important to evaluate the impact of conscription on draftees, including its effect on fertility outcomes. Additionally, fertility is of particular interest because birth rates have been below replacement levels in most European countries at least in the last two decades. This, combined with the increase in life expectancy, has contributed to aging population and raises concerns about the future economic prospects and sustainability of the continent. Military service could be related to fertility in several ways. Compulsory service for men would affect the marriage market and subsequently child-bearing outcomes. For example, men who serve in the military would have to delay higher education at least by a year, given that they plan to continue their education after high school. One possibility is that this leads to older men meeting younger women if partners meet at college. Alternatively, in case the partners know each other prior to the draft, service could delay marriage by up to a year due to the conscription, postponing planning and having children, and potentially having fewer children as women might be less able or less willing to have a child after a certain age. Finally, some men who plan and would otherwise continue their education might choose to not do so or to further postpone it once they disattach from studying during their service. For some men, this might influence their marital and subsequent fertility outcomes. In either of these scenarios, a draft or its suspension is likely to be connected to fertility.

This study examines the effect of the suspension of the draft in Spain in December 2001 on three fertility outcomes of men that would have been drafted in the absence of the suspension. The author performs the analysis in a difference-in-differences framework. Potential concerns and policy implications are also discussed.

The findings suggest that after the suspension of the draft, individuals started to have their first child earlier given that they decide to have children. Consistent with the overall time trend, they became less likely to have a child and started to have fewer children. However, the age at birth of the first child decreased while the number of children and the likelihood of having a child increased for men relative to women, after compared to before the suspension of the mandatory draft.

The author extends prior literature by investigating the effect of the abolition of compulsory military service in Spain in December 2001 on fertility. This is novel is several ways. First, to the best of the author’s knowledge, previous literature has examined the effect of this Spanish reform only on labor market outcomes prior to men's conscription. Second, even for other countries that terminated the compulsory draft, fertility has been under-studied, providing an opportunity for further exploration. Third, this analysis is based on rich Census data, representative of the population in Spain. Finally, given the inconclusive findings of previous studies for other countries and the proposed re-introduction of the draft in some parts of Europe, additional evidence of the effect of the conscription has important policy implications necessary for the evaluation of future military service policy decisions.

This study aimed to review various existing methods for improving the quality of recycled concrete aggregates (RCAs) as a possible substitution for natural aggregates (NAs) in concrete. It is vital as the old paste attached to the RCA weakens its structure. It is due to the porous structure of the RCA with cracks, weakening the interfacial transition zone (ITZ) between the RCA and binding material, negatively impacting the concrete's properties. To this end, various methods for reinforcement of the RCA, cleaning the RCA's old paste and enhancing the quality of the RCA-based concrete without RCA modification are studied in terms of environmental effects, cost and technical matters. Furthermore, this research sought to identify gaps in knowledge and future research directions.

The review of the relevant journal papers revealed that various methods exist for improving the properties of RCAs and RCA-based concrete. A decision matrix was developed and implemented for ranking these techniques based on environmental, economic and technical criteria.

The identified methods for reinforcement of the RCA include accelerated carbonation, bio deposition, soaking in polymer emulsions, soaking in waterproofing admixture, soaking in sodium silicate, soaking in nanoparticles and coating with geopolymer slurry. Moreover, cleaning the RCA's old paste is possible using acid, water, heating, thermal and mechanical treatment, thermo-mechanical and electro-dynamic treatment. Added to these treatment techniques, using RCA in saturated surface dry (SSD) mixing approaches and adding fibres or pozzolana enhance the quality of the RCA-based concrete without RCA modification. The study ranked these techniques based on environmental, economic and technical criteria. Ultimately, adding fibres, pozzolana and coating RCA with geopolymer slurry were introduced as the best techniques based on the nominated criteria.

The study supported the need for better knowledge regarding the existing treatment techniques for RCA improvement. The outcomes of this research offer an understanding of each RCA enrichment technique's importance in environmental, economic and technical criteria.

The practicality of the RCA treatment techniques is based on economic, environmental and technical specifications for rating the existing treatment techniques.

Material extrusion-based additive manufacturing is a prominent manufacturing technique to fabricate complex geometrical three-dimensional (3D) parts. Despite the indisputable advantages of material extrusion-based technique, the poor surface and subsurface integrity hinder the industrial application of this technology. The purpose of this study is introducing the hot air jet treatment (HAJ) technique for surface treatment of additive manufactured parts.

In the presented research, novel theoretical formulation and finite element models are developed to study and model the polishing mechanism of printed parts surface through the HAJ technique. The model correlates reflow material volume, layer width and layer height. The reflow material volume is a function of treatment temperature, treatment velocity and HAJ velocity. The values of reflow material volume are obtained through the finite element modeling model due to the complexity of the interactions between thermal and mechanical phenomena. The theoretical model presumptions are validated through experiments, and the results show that the treatment parameters have a significant impact on the surface characteristics, hardness and dimensional variations of the treated surface.

The results demonstrate that the average value of error between the calculated theoretical results and experimental results is 14.3%. Meanwhile, the 3D plots of Ra and Rq revealed that the maximum values of Ra and Rq reduction percentages at 255°C, 270°C, 285°C and 300°C treatment temperatures are (35.9%, 33.9%), (77.6%,76.4%), (94%, 93.8%) and (85.1%, 84%), respectively. The scanning electron microscope results illustrate three different treatment zones and the treatment-induced and manufacturing-induced entrapped air relief phenomenon. The measured results of hardness variation percentages and dimensional deviation percentages at different regimes are (8.33%, 0.19%), (10.55%, 0.31%) and (−0.27%, 0.34%), respectively.

While some studies have investigated the effect of the HAJ process on the structural integrity of manufactured items, there is a dearth of research on the underlying treatment mechanism, the integrity of the treated surface and the subsurface characteristics of the treated surface.

The COVID-19 has affected millions of people across the world and worsened the socio-economic conditions that have sound reasons to discuss about the impact of COVID-19 on the progress of achieving the target level of sustainable development. The stagflation due to COVID-19 has a possibility to push a large section of population back under the critical level of income. The economic restriction and lockdown has impacted on the supply of food and essential requirements for decent living. The health services and education have been jeopardised. So the possible impact to achieving the Sustainable Development Goals of no poverty (SDG1), zero hunger (SDG2), good health and wellbeing (SDG3), education (SDG4), decent work and economic growth (SDG8), income inequality (SDG10) are examined in this chapter. This chapter also discusses about the proper implementation and stress on SDGs as the possible instruments on the way out of recession. Difference-in-difference analysis is used to explain the impact of COVID-19 with the data in global context in respect of before COVID and after COVID.

This paper aims to examine whether China's grain price support policy has distorted the grain market price.

The time-varying differences-in-differences (DID) model is used to study the impact of support policies on grain prices, and it is combined with the event study method to explore the dynamic effects of price support policy. Panel data model is used to study the effect of the price support policy on price formation for national grain market prices. In addition, we apply the smooth transformation (STR) model to verify whether there is a distortion in the transmission of grain prices among different markets in China and from the international market to China’s market.

China’s grain price support policy plays a significant role in rising grain market prices, weakens the decisive role of the market mechanism in the formation of grain prices, hinders the spatial transmission of market price signals and decreases the effect of price transmission from the world market to China’s market.

In order to ensure both the stability of grain production as well as the market stability, and also to ensure that intervention policies do not distort the food market, the minimum purchase price of grain and market regulation policies should be adjusted as follows: (1) price support policy should be shifted to an income support policy and (2) reasonably determine the scale of reserves and implement a grain minimum purchase price policy in limited areas.

Our findings are relevant for understanding the effect of China's grain price support policies on the implementation regions and the price transmission effect, which provide reference experience for developing countries to implement food price policies.

This paper aims to examine prospective graduate students' attitudes toward educational loan borrowing in an experimental setting.

Participants were randomly assigned to two treatment groups and one control group. Subjects in experimental group 1 received financial education: a short online course on the economic viability of getting a master's degree and how to finance it with a graduate student loan, while subjects in experimental group 2 received financial education along with information on the availability bias.

Relying on a control group in the assessment of financial literacy education intervention impacts, this research finds positive causal treatment effects on individuals’ attitudes toward debt-financed graduate education. In comparison to the control group, experimental subjects perceived the possibility of going into debt with a graduate loan to complete a master’s degree as less stressful and worrying.

This study has important educational policy implications to prevent students from stopping investing in human capital by perceiving educational loan debt as something stressful or worrying. The results can help potential (and current) grad students develop a feasible financial plan for graduate school by encouraging higher education institutions to implement educational loan information and financial education into university seminar courses for better graduate student loan decision-making.

Student attitudes toward debt have been analyzed in the context of higher education, but only a few researchers internationally have used an experimental design to study personal financial decision-making.