Search results

Taking into consideration the current human need for agricultural produce such as rice that requires water for growth, the optimal consumption of this valuable liquid is important. Unfortunately, the traditional use of water by humans for agricultural purposes contradicts the concept of optimal consumption. Therefore, designing and implementing a mechanized irrigation system is of the highest importance. This system includes hardware equipment such as liquid altimeter sensors, valves and pumps which have a failure phenomenon as an integral part, causing faults in the system. Naturally, these faults occur at probable time intervals, and the probability function with exponential distribution is used to simulate this interval. Thus, before the implementation of such high-cost systems, its evaluation is essential during the design phase.

The proposed approach included two main steps: offline and online. The offline phase included the simulation of the studied system (i.e. the irrigation system of paddy fields) and the acquisition of a data set for training machine learning algorithms such as decision trees to detect, locate (classification) and evaluate faults. In the online phase, C5.0 decision trees trained in the offline phase were used on a stream of data generated by the system.

The proposed approach is a comprehensive online component-oriented method, which is a combination of supervised machine learning methods to investigate system faults. Each of these methods is considered a component determined by the dimensions and complexity of the case study (to discover, classify and evaluate fault tolerance). These components are placed together in the form of a process framework so that the appropriate method for each component is obtained based on comparison with other machine learning methods. As a result, depending on the conditions under study, the most efficient method is selected in the components. Before the system implementation phase, its reliability is checked by evaluating the predicted faults (in the system design phase). Therefore, this approach avoids the construction of a high-risk system. Compared to existing methods, the proposed approach is more comprehensive and has greater flexibility.

By expanding the dimensions of the problem, the model verification space grows exponentially using automata.

Unlike the existing methods that only examine one or two aspects of fault analysis such as fault detection, classification and fault-tolerance evaluation, this paper proposes a comprehensive process-oriented approach that investigates all three aspects of fault analysis concurrently.

The chemical plant (CP) maintenance industry has been under increasing pressure by process designers to demonstrate its evaluation and information management of model checking (MC) on the durability’s performance and design of plant control instrument. This main problem has been termed as imperfect maintenance actions (IMAs) level. Although IMAs have been explored in interdisciplinary maintenance environments, less is known about what imperfect maintenance problems currently exist and what their causes are, such as the recent explosion in the Beirut city (4 August 2020, about 181 fatalities). The aim of this paper is to identify how CP maintenance environments could integrate MC within their processes.

To achieve this aim, a comprehensive literature review of the existing conceptualisation of MC practices is reviewed and the main features of information and communication technology tools and techniques currently being employed on such IMA projects are carried out and synthesised into a conceptual framework for integrating MC in the automation system process.

The literature reveals that various CP designers conceptualise MC in different ways. MC is commonly shaped by long-term compliance to fulfil the requirement for maintaining a comfortable durability risk on imperfect maintenance schemes of CP projects. Also, there is a lack of common approaches for integrating the delivery process of MC. The conceptual framework demonstrates the importance of early integration of MC in the design phase to identify alternative methods to cogenerate, monitor and optimise MC.

Thus far, this study advances the knowledge about how CP maintenance environments can ensure MC delivery. This paper highlights the need for further research to integrate MC in CP maintenance environments. A future study could validate the framework across the design phase with different CP project designers.

The rapid evacuation of personnel in emergency situations is of great significance to the safety of pedestrians. In order to further improve the evacuation efficiency in emergency situations, this paper proposes a pedestrian evacuation model based on improved cellular automata based on microscopic features.

First, the space is divided into finer grids, so that a single pedestrian occupies multiple grids to show the microscopic behavior between pedestrians. Second, to simulate the velocity of pedestrian movement under different personnel density, a dynamic grid velocity model is designed to establish a linear correspondence relationship with the density of people in the surrounding environment. Finally, the pedestrian dynamic exit selection mechanism is established to simulate the pedestrian dynamic exit selection process.

The proposed method is applied to single-exit space evacuation, multi-exit space evacuation, and space evacuation with obstacles, respectively. Average speed and personnel evacuation decisions are analyzed in specific applications. The method proposed in this paper can provide the optimal evacuation plan for pedestrians in multiple exit and obstacle environments.

In fire and emergency situations, the method proposed in this paper can provide a more effective evacuation strategy for pedestrians. The method proposed in this paper can quickly get pedestrians out of the dangerous area and provide a certain reference value for the stable development of society.

This paper proposes a cellular automata pedestrian evacuation method based on a fine grid velocity model. This method can more realistically simulate the microscopic behavior of pedestrians. The proposed model increases the speed of pedestrian movement, allowing pedestrians to dynamically adjust the speed according to the specific situation.

In recent years, terrorist attacks have gradually become one of the important factors endangering social security. In this context, this research aims to propose methods and principles which can be utilized to make effective evacuation plans to reduce casualties in terrorist attacks.

By analyzing the statistical data of terrorist attack videos, this paper proposes an extended cellular automaton (CA) model and simulates the panic evacuation of the pedestrians in the terrorist attack.

The main findings are as follows. (1) The panic movement of pedestrians leads to the dispersal of the crowd and the increase in evacuation time. (2) Most deaths occur in the early stage of crowd evacuation while pedestrians gather without perceiving the risk. (3) There is a trade-off between escaping from the room and avoidance of attackers for pedestrians. Appropriate panic contagion enables pedestrians to respond more quickly to risks. (4) Casualties are mainly concentrated in complex terrains, e.g. walls, corners, obstacles, exits, etc. (5) The initial position of the attackers has a significant effect on the crowd evacuation. The evacuation efficiency should be reduced if the attacker starts the attack from the exit or corners.

In this research, the concept of “focus region” is proposed to depict the different reactions of pedestrians to danger and the effects of the attacker’s motion (especially the attack strategies of attackers) are classified. Additionally, the influences on pedestrians by direct and indirect panic sources are studied.

Understanding and tailoring the solidification characteristics and microstructure evolution in as-built parts fabricated by laser powder bed fusion (LPBF) is crucial as they influence the final properties. Experimental approaches to address this issue are time and capital-intensive. This study aims to develop an efficient numerical modeling approach to develop the process–structure (P-S) linkage for LPBF-processed Inconel 718.

In this study, a numerical approach based on the finite element method and cellular automata was used to model the multilayer, multitrack LPBF build for predicting the solidification characteristics (thermal gradient G and solidification rate R) and the average grain size. Validations from published experimental studies were also carried out to ensure the reliability of the proposed numerical approach. Furthermore, microstructure simulations were used to develop P-S linkage by evaluating the effects of key LPBF process parameters on G × R, G/R and average grain size. A solidification or G-R map was also developed to comprehend the P-S linkage.

It was concluded from the developed G-R map that low laser power and high scan speed will result in a finer microstructure due to an increase in G × R, but due to a decrease in G/R, columnar characteristics are also reduced. Moreover, increasing the layer thickness and decreasing the hatch spacing lowers the G × R, raises the G/R and generates a coarse columnar microstructure.

The proposed numerical modeling approach was used to parametrically investigate the effect of LPBF parameters on the resulting microstructure. A G-R map was also developed that enables the tailoring of the as-built LPBF microstructure through solidification characteristics by tuning the process parameters.

Since the 1990s, the German current of Value Criticism has been proposing to rework a critique of capitalism based on the mature works of Marx. Starting from the primary categories of capital – value, abstract labor, commodity fetishism – they intend to overcome the traditional contradictions of Marxism, capital/labor, proletariat/bourgeoisie, etc. The Canadian thinker Moishe Postone has, independently of value criticism, developed a thought that is close to the German current while distinguishing itself on certain important points. However, it is appropriate to question these new readings of Marx which, if they can be fruitful, pose many problems, both philosophical and political.

This paper aims to explore and review the potential of robotic rehabilitation as a treatment approach for Alzheimer’s disease (AD) and its impact on the health and quality of life of AD patients.

The present discourse endeavors to provide a comprehensive overview of extant scholarly inquiries that have examined the salience of inhibitory mechanisms vis-à-vis robotic interventions and their impact on patients with AD. Specifically, this review aims to explicate the contemporary state of affairs in this realm by furnishing a detailed explication of ongoing research endeavors. With the objective of elucidating the significance of inhibitory processes in robotic therapies for individuals with AD, this analysis offers a critical appraisal of extant literature that probes the intersection of cognitive mechanisms and assistive technologies. Through a meticulous analysis of diverse scholarly contributions, this review advances a nuanced understanding of the intricate interplay between inhibitory processes and robotic interventions in the context of AD.

According to the review papers, it appears that implementing robot-assisted rehabilitation can serve as a pragmatic and effective solution for enhancing the well-being and overall quality of life of patients and families engaged with AD. Besides, this new feature in the robotic area is anticipated to have a critical role in the success of this innovative approach.

Due to the nascent nature of this cutting-edge technology and the constrained configuration of the mechanized entity in question, further protracted analysis is imperative to ascertain the advantages and drawbacks of robotic rehabilitation vis-à-vis individuals afflicted with Alzheimer’s ailment.

The potential for robots to serve as indispensable assets in the provision of care for individuals afflicted with AD is significant; however, their efficacy and appropriateness for utilization by caregivers of AD patients must be subjected to further rigorous scrutiny.

This paper reviews the current robotic method and compares the current state of the art for the AD patient.

A novel asynchronous network-based model is proposed in this paper for the sentiment analysis of online public opinions. This new model provides a new approach to analyze the evolution characteristics of online public opinion sentiments in complex environment.

Firstly, a new sentiment analysis model is proposed based on the asynchronous network theory. Then the graphical evaluation and review technique is employed and extended to design the model-based sentiment analysis algorithms. Finally, simulations and real-world case studies are given to show the effectiveness of the proposed model.

The dynamics of online public opinion sentiments are determined by both personal preferences to certain topics and the complex interactive influences of environmental factors. The application of appropriate quantitative models can improve the prediction of public opinion sentiment.

The proposed model-based algorithms provide simple but effective ways to explore the complex dynamics of online public opinions. Case studies highlight the role of government agencies in shaping sentiments of public opinions on social topics.

This paper proposes a new asynchronous network model for the dynamic sentiment analysis of online public opinions. It extends the previous static models and provides a new way to extract opinion evolution patterns in complex environment. Applications of the proposed model provide some new insights into the online public opinion management.

This study aims to discuss the state-of-the-art digital factory (DF) development combining digital twins (DTs), sensing devices, laser additive manufacturing (LAM) and subtractive manufacturing (SM) processes. The current shortcomings and outlook of the DF also have been highlighted. A DF is a state-of-the-art manufacturing facility that uses innovative technologies, including automation, artificial intelligence (AI), the Internet of Things, additive manufacturing (AM), SM, hybrid manufacturing (HM), sensors for real-time feedback and control, and a DT, to streamline and improve manufacturing operations.

This study presents a novel perspective on DF development using laser-based AM, SM, sensors and DTs. Recent developments in laser-based AM, SM, sensors and DTs have been compiled. This study has been developed using systematic reviews and meta-analyses (PRISMA) guidelines, discussing literature on the DTs for laser-based AM, particularly laser powder bed fusion and direct energy deposition, in-situ monitoring and control equipment, SM and HM. The principal goal of this study is to highlight the aspects of DF and its development using existing techniques.

A comprehensive literature review finds a substantial lack of complete techniques that incorporate cyber-physical systems, advanced data analytics, AI, standardized interoperability, human–machine cooperation and scalable adaptability. The suggested DF effectively fills this void by integrating cyber-physical system components, including DT, AM, SM and sensors into the manufacturing process. Using sophisticated data analytics and AI algorithms, the DF facilitates real-time data analysis, predictive maintenance, quality control and optimal resource allocation. In addition, the suggested DF ensures interoperability between diverse devices and systems by emphasizing standardized communication protocols and interfaces. The modular and adaptable architecture of the DF enables scalability and adaptation, allowing for rapid reaction to market conditions.

Based on the need of DF, this review presents a comprehensive approach to DF development using DTs, sensing devices, LAM and SM processes and provides current progress in this domain.

The purpose of this study is to verify that if applications categories are segmented and resources are allocated based on their specific category, how effective scheduling can be done?.

This paper proposes a scheduling framework for IoT application jobs, based upon the Quality of Service (QoS) parameters, which works at coarse grained level to select a fog environment and at fine grained level to select a fog node. Fog environment is chosen considering availability, physical distance, latency and throughput. At fine grained (node selection) level, a probability triad (C, M, G) is anticipated using Naïve Bayes algorithm which provides probability of newly submitted application job to fall in either of the categories Compute (C) intensive, Memory (M) intensive and GPU (G) intensive.

Experiment results showed that the proposed framework performed better than traditional cloud and fog computing paradigms.

The proposed framework combines types of applications and computation capabilities of Fog computing environment, which is not carried out to the best of knowledge of authors.