Search results

1 – 10 of 27
Article
Publication date: 12 April 2024

Shivendra Singh Rathore and Chakradhara Rao Meesala

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on…

Abstract

Purpose

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

Design/methodology/approach

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na2SiO3) of 1:1.5, subjected to 90°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

Findings

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

Research limitations/implications

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

Originality/value

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.

Details

World Journal of Engineering, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1708-5284

Keywords

Article
Publication date: 16 May 2022

Shubhomoy Banerjee and Abhijit Ghosh

The purpose of this study is to study the impact of relationship marketing orientation (RMO) and relationship quality on customers' commitment and pro-marketer behavior (positive…

Abstract

Purpose

The purpose of this study is to study the impact of relationship marketing orientation (RMO) and relationship quality on customers' commitment and pro-marketer behavior (positive word of mouth and external attribution) after negative brand publicity by using the combined lens of relationship marketing theory and the theory of cognitive dissonance.

Design/methodology/approach

A survey was conducted among banking customers in India using an online questionnaire. Data were analyzed using structural equation modeling and the bootstrapping procedure using the SPSS process macro.

Findings

Contrary to conventional wisdom, findings of this study suggest that RMO and relationship quality are positively correlated to commitment even after negative publicity. The path between RMO, relationship quality and pro-provider behavior is found to be mediated by commitment. This indirect path is moderated by customers' cognitive dissonance arising out of the negative publicity.

Originality/value

The study establishes the combined roles of RMO and relationship quality in pre-empting the detrimental effects of negative brand publicity. Further, it establishes interactions of cognitive dissonance with these relationship variables, thereby bringing together literature from relationship marketing theory and cognitive dissonance theory.

Details

Asia-Pacific Journal of Business Administration, vol. 15 no. 5
Type: Research Article
ISSN: 1757-4323

Keywords

Article
Publication date: 5 January 2024

Augusto Bargoni, Alberto Ferraris, Šárka Vilamová and Wan Mohd Hirwani Wan Hussain

The purpose of this paper is to provide an integrative picture of the state of the art of the literature on digitalisation of small and medium-sized enterprises (SMEs) as an…

Abstract

Purpose

The purpose of this paper is to provide an integrative picture of the state of the art of the literature on digitalisation of small and medium-sized enterprises (SMEs) as an enabler for their internationalisation process and as a comprehensive view of the specific domains impacted by digital technologies as well as their repercussions on the international outreach.

Design/methodology/approach

A systematic review which leverages a descriptive analysis of extant literature and an axial coding technique has been conducted to shed light on the current knowledge and to identify primary research areas and future research lines.

Findings

The research indicates that digitalisation impacts the internationalisation of SMEs in three specific domains: (1) internationalisation through the adoption of information and communication technologies (ICT) technologies and e-commerce platforms; (2) international expansion through the digitalisation of value chain activities and (3) international outreach through knowledge acquisition on digital platforms.

Originality/value

The value of this study is threefold. First, the authors attempt to systematically review the literature on SMEs digitalisation and internationalisation and provide a holistic perspective on the intertwining of these two research streams. Second, the authors propose a novel conceptualisation on the dimensions of SMEs digitalisation as enablers to internationalisation. Third, the authors put forward promising future lines of research.

Highlights

 

  1. Digitalisation represents a pivotal strategy that allows companies to build new strategic capabilities and is a propeller for SMEs internationalisation.

  2. Through e-commerce, SMEs could compete at the same level of multinational companies but enduring lower costs of expansion.

  3. Digital platforms allow SMEs to enhance the learning processes about international markets through an immediate access to relevant information.

  4. Digital entrepreneurship has enabled SMEs to develop new configurations of value chain activities, evolving their business model or reaching new markets.

  5. SMEs are changing the “business as usual” paradigm offering digital tools to build modular architectures that are scalable and agile in their evolution ability.

Digitalisation represents a pivotal strategy that allows companies to build new strategic capabilities and is a propeller for SMEs internationalisation.

Through e-commerce, SMEs could compete at the same level of multinational companies but enduring lower costs of expansion.

Digital platforms allow SMEs to enhance the learning processes about international markets through an immediate access to relevant information.

Digital entrepreneurship has enabled SMEs to develop new configurations of value chain activities, evolving their business model or reaching new markets.

SMEs are changing the “business as usual” paradigm offering digital tools to build modular architectures that are scalable and agile in their evolution ability.

Details

Journal of Enterprise Information Management, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1741-0398

Keywords

Article
Publication date: 13 September 2022

Burcu Felekoglu, Serdar S. Durmusoglu, Anja M. Maier and James Moultrie

This study examines how technical drivers as well as social drivers influence organic communication and top management involvement (TMI) in new product development (NPD) projects…

Abstract

Purpose

This study examines how technical drivers as well as social drivers influence organic communication and top management involvement (TMI) in new product development (NPD) projects. Technical drivers are of strategic importance and product innovativeness and social drivers are of intrinsic and extrinsic relevance. Organic communication is defined as continuous, bidirectional and informal communication between top management and the NPD teams. Further, arguing that TMI must be studied as a multifaceted construct, it is conceptualized to occur as guidance, active motivation and providing resources and creating a tolerant climate. Subsequently, the effect of TMI and organic communication on NPD performance is investigated.

Design/methodology/approach

The data set, collected via surveys from top managers and project managers involved in 86 NPD projects in 85 firms, is analyzed using PLS structural equation modeling.

Findings

The authors show that the strategic importance of the project has a positive influence on TMI through active motivation, providing resources and creating a tolerant climate for innovation, but does not have an effect on guidance. Results also show that active motivation and organic communication improve budget and schedule adherence, whereas providing guidance and stimulating a tolerant climate have detrimental effects. In summary, the results show that only active motivation enhances all types of performance while stimulating a tolerant climate appears to have the opposite effect. The results revealed that organic communication between top management and the NPD team has a strong positive effect on all elements of TMI (providing guidance, actively motivating the NPD team, providing resources and creating a tolerant climate). In other words, when top management communicates with the NPD team throughout the project in an informal way and listens to them in addition to engaging in a one-way communication, they are more likely to be seen by the team as being deeply involved in the project.

Practical implications

Executives must walk a managerial tightrope to actively motivate and to assist in providing resources, yet they must not be overbearing with direct guidance and must limit their tolerance for failures.

Originality/value

Involvement of key organizational actors such as top management and the link to project performance has attracted significant attention in research. However, nuanced empirical insights into the dyad of top management and project teams has so far been absent. The study’s findings detail the effect of technical and social drivers of top management involvement in new product development projects. Most notably, (1) the effect of motivation and stimulating a tolerant climate on performance, and (2) the effect of organic communication on top management involvement. Moreover, this study is unique in that it empirically examines TMI from both top management and team perspectives.

Details

European Journal of Innovation Management, vol. 27 no. 3
Type: Research Article
ISSN: 1460-1060

Keywords

Open Access
Article
Publication date: 19 April 2024

Daniel Werner Lima Souza de Almeida, Tabajara Pimenta Júnior, Luiz Eduardo Gaio and Fabiano Guasti Lima

This study aims to evaluate the presence of abnormal returns due to stock splits or reverse stock splits in the Brazilian capital market context.

Abstract

Purpose

This study aims to evaluate the presence of abnormal returns due to stock splits or reverse stock splits in the Brazilian capital market context.

Design/methodology/approach

The event study technique was used on data from 518 events that occurred in a 30-year period (1987–2016), comprising 167 stock splits and 351 reverse stock splits.

Findings

The results revealed the occurrence of abnormal returns around the time the shares began trading stock splits or reverse stock splits at a statistical significance level of 5%. The main conclusion is that stock split and reverse stock split operations represent opportunities for extraordinary gains and may serve as a reference for investment strategies in the Brazilian stock market.

Originality/value

This study innovates by including reverse stock splits, as the existing literature focuses on stock splits, and by testing two distinct “zero” dates that of the ordinary general meeting that approved the share alteration and the “ex” date of the alteration, when the shares were effectively traded, reverse split or split.

Details

Journal of Economics, Finance and Administrative Science, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2077-1886

Keywords

Article
Publication date: 13 October 2022

Silvia Vermicelli, Livio Cricelli, Michele Grimaldi, Benito Mignacca and Serena Strazzullo

Academics and practitioners are increasingly discussing the role of crowdsourcing initiatives in dealing with the challenges imposed by the COVID-19 pandemic, along with their…

Abstract

Purpose

Academics and practitioners are increasingly discussing the role of crowdsourcing initiatives in dealing with the challenges imposed by the COVID-19 pandemic, along with their role in an emergency context in general. However, empirical evidence about the role of crowdsourcing initiatives in an emergency context is still scarce. This paper aims to address this gap in knowledge.

Design/methodology/approach

The authors adopted an inductive approach to investigate how companies leveraged crowdsourcing initiatives to address the issues posed by COVID-19. Data were collected through semi-structured interviews. The selection of the interviewees was based on a purposive sampling strategy. Data were analysed through thematic analysis.

Findings

The analysis led to the identification and examination of drivers (e.g. preserving relationships with customers), advantages (e.g. increased demand for services) and disadvantages (e.g. increased platform cost) of implementing crowdsourcing initiatives during COVID-19. By leveraging the findings, this paper suggests future research opportunities. Relevant future research opportunities include: (1) quantitatively evaluating the economic impact of crowdsourcing initiatives during a disruptive event and (2) examining how the sector in which the company operates influences the beneficial and detrimental effects of crowdsourcing initiatives on company performance.

Originality/value

The involvement of crowds as innovation partners has provided unique opportunities for companies to innovate and address the challenging scenario. The scientific literature about the role of crowdsourcing during COVID-19 is growing. However, there is still a scarcity of empirical evidence about the mechanisms underpinning the use of crowdsourcing during the pandemic. By leveraging semi-structured interviews, this paper addresses this relevant gap in knowledge.

Details

European Journal of Innovation Management, vol. 27 no. 3
Type: Research Article
ISSN: 1460-1060

Keywords

Article
Publication date: 26 December 2023

Katrina E. Forbes-McKay, Pauline A.M. Bremner, Pamela Johnston and Carol Air

This study addresses gaps in the existing literature on students' understanding of Independent Learning (IL), whilst exploring the link between levels of IL, growth mindset…

Abstract

Purpose

This study addresses gaps in the existing literature on students' understanding of Independent Learning (IL), whilst exploring the link between levels of IL, growth mindset, motivated strategies for learning and academic performance.

Design/methodology/approach

Three hundred and eighty-six university students recruited via opportunistic sampling completed an online survey to measure: understanding and level of IL, Motivated Strategies for Learning (MSL) (Duncan and McKeachie, 2005) and growth mindset (Dweck, 2000). Interaction with the university Virtual Learning Environment (VLE) and academic grades were also measured. A correlational design was implemented, and a Spearman Rho was calculated to explore the relationship between level of IL, MSL and growth mindset. A between-subjects design using independent measures t-test was employed to determine the significance of any difference in level of IL and VLE engagement according to academic grade.

Findings

Whilst most students: considered themselves an IL and understood what IL was, the majority erroneously believed it meant learning alone or without help. Level of IL, however, was positively associated with motivational beliefs (self-efficacy and mindset), cognitive strategies (rehearsal, elaboration, organisation and critical thinking), and metacognitive strategies (time management and self-regulation). Further, those with grades A-C scored significantly higher than those with grades D and below on cognitive strategies (elaboration and organisation). Those attaining higher grades also interacted with the VLE significantly more frequently and regularly than those attaining lower grades.

Originality/value

This study adds to the existing literature by highlighting the positive relationship between level of IL, MSL, mindset and academic achievement. It also addresses the under-explored potential for VLE engagement in predicting grades amongst on-campus courses. Given that cognitive strategies and VLE engagement differentiate the high and low achievers, interventions to develop such skills may enhance academic achievement.

Details

Journal of Applied Research in Higher Education, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2050-7003

Keywords

Article
Publication date: 12 April 2024

Sandra Carrasco and Irene Perez Lopez

This study explores the opportunities for a gender-inclusive architecture, engineering and construction (AEC) industry, focussing on the gap between architectural education and…

Abstract

Purpose

This study explores the opportunities for a gender-inclusive architecture, engineering and construction (AEC) industry, focussing on the gap between architectural education and practice. This study focusses on three research questions: (1) What factors influence women architects' career retention and advancement in the AEC industry? How can practice outcomes be linked with educational approaches for gender inclusion in the AEC industry? (3) What critical factors can enable structural changes in architecture education, including AEC-related subjects and practice/career pathways towards gender equity?

Design/methodology/approach

This paper is based on a systematic literature review (SLR). The established timeframe for selecting papers in this study considered the last 20 years, as various seminal studies in feminism and gender inclusion in architecture emerged in the early 2000s through the definition of keywords used in two prestigious databases. The academic articles selected were filtered through a process of inclusion and exclusion, following criteria for suitability and relevance using a Preferred Reporting Items for Systematic Reviews (PRISMA) diagram.

Findings

This study revealed key trends in the literature review consistent with the research questions, including (1) the disproportionate struggles women face at individual, interpersonal and organisational levels and the gender-based bias from entry and progression in the AEC industry that also requires multi-level interventions; (2) traditional architecture education affects female students and educators who find networking, social capital and leadership opportunities to challenge gender-based stereotypes and promote workplace equity, and finally, (3) observe enablers for fostering equity in architecture and education, which should not be limited to policy-driven interventions but structural transformations through transparency, mentorship, leadership, awareness raising and empowerment of women and men, promoting inclusivity and gender equity in the AEC industry.

Research limitations/implications

This study considers a global understanding of gender equity in the AEC industry, regional and country-specific analysis needs to be considered in future studies. The study's focus is on women’s inclusion, acknowledging the limitations of conventional binary gender concepts; future studies need to include the experiences of LGBTI + communities and other underrepresented groups. The literature review considers only academic articles; future research should also consider industry reports, government initiatives and organisational documents for a broader understanding of diversity efforts in business.

Originality/value

This paper observes the issues for gender-inclusive architecture within the context of a male-dominant AEC industry through linking architectural education and practice. Studies rarely focus on this link and address workplace issues. This study highlights this link and extends the discussion through the critical literature review, providing a new ground for geographic-specific or intersectional studies.

Details

Archnet-IJAR: International Journal of Architectural Research, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2631-6862

Keywords

Article
Publication date: 1 February 2022

Ayman Ahmed Ezzat Othman and Yomna Abdelghany El-Saeidy

The purpose of this paper is to develop a framework to facilitate early supplier involvement (ESI) as an approach for reducing construction waste (CW) generated during the design…

Abstract

Purpose

The purpose of this paper is to develop a framework to facilitate early supplier involvement (ESI) as an approach for reducing construction waste (CW) generated during the design process.

Design/methodology/approach

A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, the literature review was used to investigate CW, CW generated during the design process, the design process and ESI. Second, two construction projects were analysed to investigate the role of ESI towards reducing CW generated during the design waste. Third, a survey questionnaire was carried out with a representative sample of architectural design firms (ADFs) in Egypt to examine their perception and application of ESI towards reducing CW generated during the design process. Based on the results of the above, the research developed a framework to facilitate ESI during the design process to reduce CW.

Findings

Through literature review, the research highlighted the causes of CW generated during the design process and identified the benefits and challenges that encounter ESI in ADFs. Results of data analysis showed that “last-minute changes due to client requirements” was ranked the highest challenges of ESI in ADFs in Egypt followed by “lack of design experience”. Moreover, “providing technical information about materials and equipment and their capabilities” was ranked by respondents as the highest contributions of suppliers during the design process which leads to waste reduction followed by “better estimation of materials and costs”. Finally, respondents stated that “resistance of ADFs to include suppliers in the design phase” was ranked the highest challenge of ESI in the design process followed by “no clear guidelines or policies that organise ESI”.

Research limitations/implications

Because of the conceptual nature of the proposed framework, it has to be tested and validated to ensure its capability to overcome the challenges of ESI as an approach for reducing CW generated during the design process.

Practical implications

This research presents a practical solution to the problem of CW generated during the design process through ESI.

Originality/value

The research discussed the causes of CW originated from the design process and the benefits and challenges of ESI in ADFs. It investigated the perception and application of ESI in ADFs in Egypt. The proposed framework which was designed to facilitate the integration of suppliers in the early stages of the project life cycle represents a synthesis that is novel and creative in thought and adds value to the knowledge in a manner that has not previously occurred.

Details

Journal of Engineering, Design and Technology , vol. 22 no. 2
Type: Research Article
ISSN: 1726-0531

Keywords

Article
Publication date: 21 November 2023

Fouad Jamaani and Abdullah M. Alawadhi

Driven by the anticipated global stagflation, this straightforward yet novel study examines the cost of inflation as a macroeconomic factor by investigating its influence on stock…

Abstract

Purpose

Driven by the anticipated global stagflation, this straightforward yet novel study examines the cost of inflation as a macroeconomic factor by investigating its influence on stock market growth. Thus, this paper aims to examine the impact of inflation on the probability of initial public offering (IPO) withdrawal decision.

Design/methodology/approach

The paper employs a large dataset that covers the period January 1995–December 2019 and comprises 33,536 successful or withdrawn IPOs from 22 nations with various legal and cultural systems. This study applies a probit model utilizing version 15 of Stata statistical software.

Findings

This study finds that inflation is substantially and positively correlated with the likelihood of IPO withdrawal. Results of this study show that the IPO withdrawal decision increases up to 90% when the inflation rate climbs by 10%. Multiple robustness tests provide consistent findings.

Practical implications

This study's implications are important for researchers, investment banks, underwriters, issuers, regulators and stock exchanges. When processing IPO proposals, investment banks, underwriters and issuers must consider inflation projections to avoid negative effects, as demonstrated by the findings. In addition, regulators and stock exchanges must be aware of the detrimental impact of inflation on competitiveness in attracting new listings.

Originality/value

To the best of the authors’ knowledge, this study is the first to present convincing evidence of a major relationship between IPO withdrawal decision and inflation.

Details

International Journal of Emerging Markets, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1746-8809

Keywords

1 – 10 of 27