Search results

The paper aims to clarify the relationship between energy flexibility and building components and technologies. It determines the energy flexibility potential of buildings in relation to their physical characteristics and heat supply systems with respect to external boundary conditions.

The emphasis of the evaluation is based on the timing and the amount of shiftable and storable thermal loads in buildings under defined indoor thermal comfort conditions. Dynamic building simulation is used to evaluate the potential of selected building characteristics to shift heating loads away from peak demand periods. Insights on the energy flexibility potential of individual technologies are gained by examining the thermal behaviour of single-zone simulation models as different input parameters are varied. For this purpose, parameters such as envelope qualities, construction materials, control systems for heating are modified.

The paper provides a comprehensive understanding of the influence of the different building parameters and their variations on their energy shifting potential under “laboratory conditions” with steady boundaries. It suggests that the investigated boundary conditions such as outside temperature, infiltration, envelope quality and user behaviour, which influence the heating load of a building, also influence the resulting potential for energy flexibility. The findings show that the combination of a slowly reacting heat transfer system, such as concrete core activation and a readily available storage mass in the room, and a high insulation standard proved to have a high potential to shift heating loads.

In this paper, energy-flexible components were evaluated in a steady-state simulation approach. Outside temperature, solar irradiation and internal loads over the simulation duration were set constant over time to provide laboratory conditions for the potential analysis. On the basis of both duration and performance of the load shifting or storage event, the components were then quantified in a parametric simulation. The determined energy flexibility is directly related to the power of the heating, cooling, hot water and ventilation system, which can be switched on or off. In general, it can be seen that high power (high loads) demand usually can be switched on and off for a short duration, and low power demand usually for a longer duration. The investigated boundary conditions such as outside temperature, infiltration, envelope quality and user behaviour, which influence the load of a building, also influence the resulting potential for energy flexibility. Higher insulation standards, for example, lead to lower loads that can be switched on or off, but increase the duration of the event (flexibility time). So that, in particular, the shiftable load potential is low but results in a long switch-off duration. Furthermore, passive storage potential in buildings like the storage mass inside the room and the type of heat/cooling transfer system can affect the flexibility potential by more than three times. Especially the combination of a high storage mass and a concrete core heat transfer system can significantly increase the flexibility.

The purpose of this paper is to study entropy generation in magneto-Jeffrey nanomaterial flow by impermeable moving boundary. Adopted nanomaterial model accounts Brownian and thermophoretic diffusions. Modeling is arranged for thermal radiation, nonlinear convection and viscous dissipation. In addition, the concept of Arrhenius activation energy associated with chemical reaction are introduced for description of mass transportation.

Homotopy algorithms are used to compute the system of ordinary differential equations.

The afore-stated analysis clearly notes that simultaneous aspects of activation energy and entropy generation are not yet investigated. Therefore, the intention here is to consider such effects to formulate and investigate the magneto-Jeffrey nanoliquid flow by impermeable moving surface.

As per the authors’ knowledge, no such work has yet been published in the literature.

The purpose of this paper is to investigate the behavior of a non-Newtonian nanofluid caused by peristaltic waves along an asymmetric channel. Additionally considered is the production of thermal radiation and activation energy.

The equations of momentum, mass and temperature of Sutterby nanofluids are obtained for long wavelength. By taking into account the velocity, temperature and concentration, the formulation is further finished.

Analyses of the physical variables influencing flow features are represented graphically. The present investigation shows that an enhancement in the temperature ratio parameter results in an increase in both the temperature and concentration. The investigation also shows that the dimensionless reaction rate significantly raises the kinetic energy of the reactant, which permits more particle collisions and as a result, raises the temperature field.

Due to their importance in the treatment of cancer, activation energy and thermal radiation as a route of heat transfer are crucial and exciting phenomena for researchers. So, the cancer cells are killed, and tumors are reduced in size with heat and making hyperthermia therapy a cutting-edge cancer treatment.

Nonlinear mixed-convective entropy optimized the flow of hyperbolic-tangent nanofluid (HTN) with magnetohydrodynamics (MHD) process is considered over a vertical slendering surface. The impression of activation energy is incorporated in the modeling with the significance of nonlinear radiation, dissipative-function, heat generation/consumption connection and Joule heating. Research in this area has practical applications in the design of efficient heat exchangers, thermal management systems or nanomaterial-based devices.

Suitable set of variables is introduced to transform the PDEs (Partial differential equations) system into required ODEs (Ordinary differential equations) system. The transformed ODEs system is then solved numerically via finite difference method. Graphical artworks are made to predict the control of applicable transport parameters on surface entropy, Bejan number, Sherwood number, skin-friction, Nusselt number, temperature, velocity and concentration fields.

It is noticed from present numerical examination that Bejan number aggravates for improved estimations of concentration-difference parameter a_2, Eckert number E_c, thermal ratio parameter ?_w and radiation parameter R_d, whereas surface entropy condenses for flow performance index n, temperature-difference parameter a_1, thermodiffusion parameter N_t and mixed convection parameter ?. Sherwood number is enriched with the amplification of pedesis-motion parameter N_b, while opposite development is perceived for thermodiffusion parameter. Lastly, outcomes are matched with formerly published data to authenticate the present numerical investigation.

To the best of the authors' knowledge, no investigation has been reported yet that explains the entropic behavior with activation energy in the flowing of hyperbolic-tangent mixed-convective nanomaterial due to a vertical slendering surface.

The purpose of this paper is to explore the novel aspects of activation energy in the nonlinearly convective flow of Walter-B nanofluid in view of Cattaneo–Christov double-diffusion model over a permeable stretched sheet. Features of nonlinear thermal radiation, dual stratification, non-uniform heat generation/absorption, MHD and binary chemical reaction are also evaluated for present flow problem. Walter-B nanomaterial model is employed to describe the significant slip mechanism of Brownian and thermophoresis diffusions. Generalized Fourier’s and Fick’s laws are examined through Cattaneo–Christov double-diffusion model. Modified Arrhenius formula for activation energy is also implemented.

Several techniques are employed for solving nonlinear differential equations. The authors have used a homotopy technique (HAM) for our nonlinear problem to get convergent solutions. The homotopy analysis method (HAM) is a semi-analytical technique to solve nonlinear coupled ordinary/partial differential equations. The capability of the HAM to naturally display convergence of the series solution is unusual in analytical and semi-analytic approaches to nonlinear partial differential equations. This analytical method has the following great advantages over other techniques:

• It provides a series solution without depending upon small/large physical parameters and applicable for not only weakly but also strongly nonlinear problems.

• It guarantees the convergence of series solutions for nonlinear problems.

• It provides us a great choice to select the base function of the required solution and the corresponding auxiliary linear operator of the homotopy.

It provides a series solution without depending upon small/large physical parameters and applicable for not only weakly but also strongly nonlinear problems.

It guarantees the convergence of series solutions for nonlinear problems.

It provides us a great choice to select the base function of the required solution and the corresponding auxiliary linear operator of the homotopy.

Brief mathematical description of HAM technique (Liao, 2012; Mabood et al., 2016) is as follows. For a general nonlinear equation:

where N denotes a nonlinear operator, x the independent variables and u(x) is an unknown function, respectively. By means of generalizing the traditional homotopy method, Liao (1992) creates the so-called zero-order deformation equation:

here q∈[0, 1] is the embedding parameter, H(x) ≠ 0 is an auxiliary function, h(≠ 0) is a nonzero parameter, L is an auxiliary linear operator, u_o(x) is an initial guess of u(x) and u ˆ ( x ; q ) is an unknown function, respectively. It is significant that one has great freedom to choose auxiliary things in HAM. Noticeably, when q=0 and q=1, following holds:

Expanding u ˆ ( x ; q ) in Taylor series with respect to (q), we have:

If the initial guess, the auxiliary linear operator, the auxiliary h and the auxiliary function are selected properly, then the series (4) converges at q=1, then we have:

By defining a vector u → = ( u o ( x ) , u 1 ( x ) , u 2 ( x ) , … , u n ( x ) ) , and differentiating Equation (2) m-times with respect to (q) and then setting q=0, we obtain the mth-order deformation equation:

where:

Applying L⁻¹ on both sides of Equation (6), we get:

In this way, we obtain u_m for m ⩾ 1, at mth-order, we have:

It is evident from obtained results that the nanoparticle concentration field is directly proportional to the chemical reaction with activation energy. Additionally, both temperature and concentration distributions are declining functions of thermal and solutal stratification parameters (P₁) and (P₂), respectively. Moreover, temperature Θ(Ω₁) enhances for greater values of Brownian motion parameter (N_b), non-uniform heat source/sink parameter (B₁) and thermophoresis factor (N_t). Reverse behavior of concentration ϒ(Ω₁) field is remarked in view of (N_b) and (N_t). Graphs and tables are also constructed to analyze the effect of different flow parameters on skin friction coefficient, local Nusselt number, Sherwood numbers, velocity, temperature and concentration fields.

The novelty of the present problem is to inspect the Arrhenius activation energy phenomena for viscoelastic Walter-B nanofluid model with additional features of nonlinear thermal radiation, non-uniform heat generation/absorption, nonlinear mixed convection, thermal and solutal stratification. The novel aspect of binary chemical reaction is analyzed to characterize the impact of activation energy in the presence of Cattaneo–Christov double-diffusion model. The mathematical model of Buongiorno is employed to incorporate Brownian motion and thermophoresis effects due to nanoparticles.

The purpose of this article is to analyze the heat and mass transfer with entropy generation during magnetohydrodynamics (MHD) flow of non-Newtonian Sisko nanofluid over a linearly stretching cylinder under the influence of velocity slip, chemical reaction and thermal radiation. The Brownian motion, thermophoresis and activation energy are assimilated in this nanofluid model. Convective boundary conditions on heat and mass transfer are considered. The physical model may have diverse applications in several areas of technology underlying thermohydrodynamics including supercritical fluid extraction, refrigeration, ink-jet printing and so on.

The dimensional governing equations are nondimensionalized by using appropriate similarity variables. The resulting boundary value problem is converted into initial value problem using the method of superposition and numerically computed by employing well-known fourth-order Runge–Kutta–Fehlberg approach along with shooting technique (RKF4SM). The quantitative impacts of emerging physical parameters on the velocity, temperature, concentration, skin friction coefficient, Nusselt number, Sherwood number, entropy generation rate and Bejan number are presented graphically and in tabular form, and the salient features are comprehensively discussed.

From graphical outcomes, it is concluded that the slip parameters greatly influence the flow characteristics. Fluid temperature is elevated with rising radiation parameter and thermal Biot number. Nanoparticle concentration is reported in decreasing form with activation energy parameter. Entropy is found to be an increasing function of magnetic field, Brownian motion and material parameters. The entropy is less generated for shear-thinning fluid compared to shear-thickening as well as Newtonian fluids in the system.

Till now no study has been documented to explore the impact of binary chemical reaction with Arrhenius activation energy on entropy generation in an MHD boundary layer flow of non-Newtonian Sisko nanofluid over a linear stretching cylinder with velocity slip and convective boundary conditions.

The tribological properties of muscovite and its thermal-treated products as lubricant additives in lithium grease were investigated. The effect of thermal temperature on the crystal structure and tribological properties of muscovite was studied. This study aims to explore the tribological mechanism of muscovite and optimize a proper thermal activation temperature, thus further improving the tribological properties.

The crystal structure of muscovite samples was characterized by SEM, TG-DSC, XRD and FTIR. The tribological properties of grease samples were investigated using a four-ball tribotester and the worn surface was analyzed by SEM and EDS.

The excellent tribological properties of muscovite can be ascribed to the layer structure and lubricant film formed on the worn surface. Thermal temperature at 500-600°C increases the surface activity and oxygen releasing capability, and thus favors the formation of lubricant film and accordingly further improves the tribological properties. However, the layer structure is destroyed and hard phases such as alumina and amorphous appear after thermal temperature activated beyond 1000°C, as it results in the aggravation of friction and wear.

To the authors’ knowledge, it is the first to study the effect of thermal temperature on the crystal structure and tribological properties of muscovite. The tribological mechanism of muscovite particle and its thermal-treated products was disclosed.

The purpose of this paper is to analyze the combined effects of thermal radiation and activation energy with a chemical reaction on the quadratic convective flow of a micropolar fluid over an inclined plate. Convective thermal boundary condition and suction/injection effects are considered at the surface of an inclined plate.

The convection along with nonlinear Boussinesq approximation (i.e. quadratic convection or nonlinear convection) and usual boundary layer assumptions is employed in the mathematical formulation. Highly coupled nonlinear governing equations are tackled by a combined local non-similarity and successive linearization techniques.

The behavior of various pertinent parameters on the fluid flow characteristics is conferred through graphs and it reveals that the qualitative behaviors of velocity, temperature, skin friction and heat transfer rates of a micropolar fluid are similar for Biot number and radiation parameters. The suction/injection and activation energy parameters increase the concentration of the micropolar fluid within the boundary layer, while the chemical reaction parameter reduces the concentration in the same region. Further, this quadratic convection shows a strong influence on the fluid flow characteristics and then the impact of pertinent parameters is more prominent on the physical quantities, compared therewith results of the linear convection.

This kind of investigation is useful in the mechanism of combustion, aerosol technology, high-temperature polymeric mixtures and solar collectors which are operated at moderate to very high temperatures.

This attempt is a unique contribution to the establishment of both micropolar fluid and activation energy. This kind of study even in the absence of quadratic convection is not yet noted.

The purpose of the current flow configurations is to bring to attention the thermophysical aspects of magnetohydrodynamics (MHD) Williamson nanofluid flow under the effects of Joule heating, nonlinear thermal radiation, variable thermal coefficient and activation energy past a rotating stretchable surface.

A mathematical model is examined to study the heat and mass transport analysis of steady MHD Williamson fluid flow past a rotating stretchable surface. Impact of activation energy with newly introduced variable diffusion coefficient at the mass equation is considered. The transport phenomenon is modeled by using highly nonlinear PDEs which are then reduced into dimensionless form by using similarity transformation. The resulting equations are then solved with the aid of fifth-order Fehlberg method.

The rotating fluid, heat and mass transport effects are analyzed for different values of parameters on velocity, energy and diffusion distributions. Parameters like the rotation parameter, Hartmann number and Weissenberg number control the flow field. In addition, the solar radiation, Joule heating, Prandtl number, thermal conductivity, concentration diffusion coefficient and activation energy control the temperature and concentration profiles inside the stretching surface. It can be analyzed that for higher values of thermal conductivity, Eckret number and solar radiation parameter the temperature profile increases, whereas opposite behavior is noticed for Prandtl number. Moreover, for increasing values of temperature difference parameter and thermal diffusion coefficient, the concentration profile shows reducing behavior.

This paper is useful for researchers working in mathematical and theoretical physics. Moreover, numerical results are very useful in industry and daily-use processes.