Search results

The purpose of this study is to consider the effects that buoyancy arising from the combination of both thermal and concentration gradients can have on the mixed convection boundary-layer flow near a forward stagnation point with the effect of Stefan blowing being included. Ad suitable choice for the functional forms of the outer flow and the wall temperature and concentration enables the problem to be reduced to a similarity form involving the dimensionless parameters, λ (mixed convection), κ (Stefan blowing) and N (relative strength of concentration driven buoyancy to that of thermal driven), as well as the Prandtl and Schmidt numbers. Numerical solutions to this similarity system for a range of representative parameter values indicate a finite, non-zero range of κ where there can be four solutions in opposing flow with only one solution in aiding flow. Asymptotic solutions for large values of N and κ are derived, the latter having two different structures in the opposing flow.

This paper sets up a similarity problem to examine the effects of Stefan blowing on a mixed convection flow with the aims of solving the equations numerically and complementing the results with appropriate asymptotic analysis.

The findings of the study include multiple solution branches, saddle-node bifurcations and singularities appearing in the solution.

The authors believe that all the results, both numerical and asymptotic, are original and have not been published elsewhere.

The purpose of this paper is to analyse the buoyancy flow, mass and heat transfer in coaxial duct under Soret and Dufour effect. The combined effects of the thermal-diffusion and diffusion-thermo coefficients, as well as the Schmidt number, on natural convection in a heated lower coaxial curve were explored using the proposed physical model. The Dufour and Soret effects are taken into consideration in the energy and concentration equations, respectively.

The dominating mathematical models are converted into a set of non-linear coupled partial differential equations, which are solved using a numerical approach. The controlling non-linear boundary value problem is numerically solved using the penalty finite element method with Galerkin’s weighted residual scheme over the entire variety of essential parameters.

It was observed that different parameters were tested such as heat generation or absorption coefficient, buoyancy ratio, Soret coefficient, Dufour coefficient, Lewis number and Rayleigh number. Effect of Rayleigh number, absorption/generation and Dufour coefficient on isotherm are significantly reported. For greater values of Lewis number, maximum mass transfer in duct in the form of molecular particles is produced. Buoyancy ratio parameter decreases the average rate of heat flow and increases its mass transfer.

The main originality of this work is to make an application of Soret and Dufour effects in a coaxial duct in the presence of source sink.

The nonlinear density thermal/solutal fluctuations in the buoyancy force term cannot be ignored when the temperature/concentration difference between the surface and fluid is large. The purpose of this paper is to investigate the nonlinear density fluctuations across a flowing fluid with heat mass transfer effects on a non-axial rotating plate. Therefore, the impact of nonlinear convection in the flow of Casson fluid over an oscillating plate has been analytically investigated.

The governing equations are modeled with the help of conservation equations of velocity, energy and concentration under the transient-state situation. The dimensional governing equations are non-dimensionalized by utilizing non-dimensional variables. Later, the subsequent non-dimensional problem has been solved analytically using Laplace transform method.

The effects of thermal Grashof number, solute Grashof number, nonlinear convection parameters, Casson fluid parameter, unsteady parameter, Prandtl number as well as Schmidt number on hydrodynamic, thermal and solute characteristics have been quantified. The numeric data for skin friction coefficient, Nusselt number and Sherwood number are presented. It is established the nonlinear convection aspect has a significant influence on heat and mass transport characteristics.

The effect of nonlinear convection in the dynamics of Casson fluid past an oscillating plate which is rotating non-axially is investigated for the first time.

The purpose of this paper is to numerically study the double-diffusive natural convection within an eccentric horizontal cylindrical annulus filled with a Newtonian fluid. The annulus walls are maintained at uniform temperatures and concentrations so as to induce aiding thermal and mass buoyancy forces within the fluid. For that, this simulation span a moderate range of thermal Rayleigh number (100Ra_T100,000), Lewis (0.1Le10), buoyancy ratio (0N5) and Prandtl number (Pr=0.71) to examine their effects on flow motion and heat and mass transfers.

A finite volume method in conjunction with the successive under-relaxation algorithm has been developed to solve the bipolar equations. These are written in dimensionless form in terms of vorticity, stream function, temperature and concentration. Beforehand, the implemented computer code has been validated through already published findings in the literature. The isotherms, streamlines and iso-concentrations are exhibited for various values of Rayleigh and Lewis numbers, and buoyancy ratio. In addition, heat and mass transfer rates in the annulus are translated in terms of Nusslet and Sherwood numbers along the enclosure’s sides.

It is observed that, for the range of parameters considered here, the results show that the average Sherwood number increases with, while the average Nusselt number slightly dips as the Lewis number increases. It is also found that, under the convective mode, the local Nusselt number (or Sherwood) increases with the buoyancy ratio. Likewise, according to Lewis number’s value, the flow pattern is either symmetric and stable or asymmetric and random. Besides that, the heat transfer is transiting from a conductive mode to a convective mode with increasing the thermal Rayleigh number, and the flow structure and the rates of heat and mass transfer are significantly influenced by this parameter.

The range of the Rayleigh number considered here covers only the laminar case, with some constant parameters, namely the Prandtl number (Pr = 0.71), and the tilt angle (α=90°). The analysis here is only valid for steady, two-dimensional, laminar and aiding flow within an eccentric horizontal cylindrical annulus. This motivates further investigations involving other relevant parameters as N (opposite flows), Ra, Pr, Le, the eccentricity, the tilt angle, etc.

An original framework for handling the double-diffusive natural convection within annuli is available, based on the bipolar equations. In addition, the achievement of this work could help researchers design thermal systems supported by annulus passages. Applications of the results can be of value in various arrangements such as storage of liquefied gases, electronic cable cooling systems, nuclear reactors, underground disposal of nuclear wastes, manifolds of solar energy collectors, etc.

Given the geometry concerned, the bipolar coordinates have been used to set the inner and outer walls boundary conditions properly without interpolation. In addition, since studies on double-diffusive natural convection in annuli are lacking, the obtained results may be of interest to handle other configurations (e.g., elliptical-shaped speakers) with other boundary conditions.

The purpose of the paper is to numerically simulate steady‐state thermo‐solutal convection in rectangular cavities with different aspect ratios, subject to horizontal temperature and concentration gradients, and validate the results against numerical and experimental data available from literature.

The fully explicit Artificial Compressibility (AC) version of the Characteristic Based Split (CBS) scheme is adopted to solve double diffusion (DD) problems. A stabilization analysis is carried out to efficiently solve the problems considered in the present work. The thermal and solutal buoyancy forces acting on the fluid have been taken into account in case of aiding and opposing flow conditions.

The stability limits derived by the authors for the thermo‐solutal convection assume a fundamental role to efficiently solve the DD problems considered. In the cases characterized by higher Rayleigh number the convergent solution is obtained only by employing the new stability conditions. The efficient matrix free procedure employed is a powerful tool to study complex DD problems.

In this paper, the authors extend the stabilization analysis for the AC‐CBS scheme to the solution of DD, fundamental to efficiently solve the present problems, and apply the present fully explicit matrix free scheme, based on finite elements, to the solution of DD natural convection in cavities.

The purpose of this paper is to study haemodynamic flow characteristics and entropy analysis in a bifurcated artery system subjected to stenosis, magnetohydrodynamic (MHD) flow and aneurysm conditions. The findings of this study offer significant insights into the intricate interplay encompassing electro-osmosis, MHD flow, microorganisms, Joule heating and the ternary hybrid nanofluid.

The governing equations are first non-dimensionalised, and subsequently, a coordinate transformation is used to regularise the irregular boundaries. The discretisation of the governing equations is accomplished by using the Crank–Nicolson scheme. Furthermore, the tri-diagonal matrix algorithm is applied to solve the resulting matrix arising from the discretisation.

The investigation reveals that the velocity profile experiences enhancement with an increase in the Debye–Hückel parameter, whereas the magnetic field parameter exhibits the opposite effect, reducing the velocity profile. A comparative study demonstrates the velocity distribution in Au-CuO hybrid nanofluid and Au-CuO-GO ternary hybrid nanofluid. The results indicate a notable enhancement in velocity for the ternary hybrid nanofluid compared to the hybrid nanofluids. Moreover, an increase in the Brinkmann number results in an augmentation in entropy generation.

This study investigates the flow characteristics and entropy analysis in a bifurcated artery system subjected to stenosis, MHD flow and aneurysm conditions. The governing equations are non-dimensionalised, and a coordinate transformation is applied to regularise the irregular boundaries. The Crank–Nicolson scheme is used to model blood flow in the presence of a ternary hybrid nanofluid (Au-CuO-GO/blood) within the arterial domain. The findings shed light on the complex interactions involving stenosis, MHD flow, aneurysms, Joule heating and the ternary hybrid nanofluid. The results indicate a decrease in the wall shear stress (WSS) profile with increasing stenosis size. The MHD effects are observed to influence the velocity distribution, as the velocity profile exhibits a declining nature with an increase in the Hartmann number. In addition, entropy generation increases with an enhancement in the Brinkmann number. This research contributes to understanding fluid dynamics and heat transfer mechanisms in bifurcated arteries, providing valuable insights for diagnosing and treating cardiovascular diseases.

The purpose of this paper is to present an analytical study on an unsteady magnetohydrodynamic (MHD) boundary layer flow of a rotating viscoelastic fluid over an infinite vertical porous plate embedded in a uniform porous medium with oscillating free-stream taking Hall and ion-slip currents into account. The unsteady MHD flow in the rotating fluid system is generated due to the buoyancy forces arising from temperature and concentration differences in the field of gravity and oscillatory movement of the free-stream.

The resulting partial differential equations governing the fluid motion are solved analytically using the regular perturbation method by assuming a very small viscoelastic parameter. In order to note the influences of various system parameters and to discuss the important flow features, the numerical results for fluid velocity, temperature and species concentration are computed and depicted graphically vs boundary layer parameter whereas skin friction, Nusselt number and Sherwood number at the plate are computed and presented in tabular form.

An interesting observation is recorded that there occurs a reversal flow in the secondary flow direction due to the movement of the free stream. It is also noted that a decrease in the suction parameter gives a rise in momentum, thermal and concentration boundary layer thicknesses.

Very little research work is reported in the literature on non-Newtonian fluid dynamics where unsteady flow in the system arises due to time-dependent movement of the plate. The motive of the present analytical study is to analyse the influences of Hall and ion-slip currents on unsteady MHD natural convection flow of a rotating viscoelastic fluid (non-Newtonian fluid) over an infinite vertical porous plate embedded in a uniform porous medium with oscillating free-stream.

The Darcy‐Forchheimer mixed convection from a vertical flat plate embedded in a fluid‐saturated porous medium under the coupled effects of thermal and mass diffusion is analyzed on the basis of boundary‐layer approximations. Similarity solutions are obtained for the case of constant surface temperature and concentration. Numerical results are presented for the distribution of velocity, temperature and concentration profiles within the boundary layer. Representative heat and mass transfer rates in terms of Nusselt and Sherwood numbers for various governing parameters are presented and discussed.

The main purpose of this study is to present a non-similar analysis of two-dimensional boundary layer flow of non-Newtonian nanofluid over a vertical stretching sheet with variable thermal conductivity. The Sisko fluid model is used for non-Newtonian fluid with an exponent (n* > 1), that is, shear thickening fluid. Buongiorno model for nanofluid accounting Brownian diffusion and thermophoresis effects is used to model the governing differential equations.

The governing boundary layer equations are converted into nondimensional coupled nonlinear partial differential equations using appropriate transformations. The resultant differential equations are solved numerically using implicit finite difference scheme in association with the quasilinearization technique.

This analysis shows that the temperature raises for thermal conductivity parameter and velocity ratio parameter while decreases for the thermal buoyancy parameter. The thermophoresis and Brownian diffusion parameter that characterizes the nanofluid flow enhances the temperature and reduces the heat transfer rate. Skin friction drag can be effectively reduced by proper control of the values of thermal buoyancy and velocity ratio parameter.

The wall heating and cooling investigation result in the analysis of the control parameters that are related to the designing and manufacturing of thermal systems for cooling applications and energy harvesting. These control parameters have practical significance in the designing of heat exchangers and solar thermal collectors, in glass and polymer industries, in the extrusion of plastic sheets, the process of cooling of the metallic plate, etc.

To the best of authors’ knowledge, it is found from the literature survey that no similar work has been published which investigates the non-similar solution of Sisko nanofluid with variable thermal conductivity using finite difference method and quasilinearization technique.

The purpose of this paper is to study numerically thermosolutal natural convection within an inclined rectangular cavity in the presence of Soret effect and heat generation. The enclosure is heated and salted from its long sides with constant but different temperatures and concentrations. The study focuses on the effects of three main parameters which are, the Soret parameter (Sr = 0 and –0.5), the internal to external Rayleigh numbers ratio 0 ≤ R ≤ 80 and the cavity inclination γ, varied from 0° (vertical position) to 60°. The combined effects of these parameters on fluid flow and heat and mass transfer characteristics are examined for the external Rayleigh number Ra_E = 10⁵, the Prandtl number Pr = 0.71, the buoyancy ratio N = 1, the Lewis number Le = 2 and the aspect ratio of the cavity A = 2.

A hybrid lattice Boltzmann-finite difference method (LBM-FD) was used to tackle the problem under consideration. The LBM with the simple relaxation time was used for the fluid flow in the presence of the gravity force, while the temperature and concentration equations were solved separately using an explicit finite-difference technique at the Boltzmann scale.

The monocellular nature of the flow, obtained for R = 0 is not destroyed by varying the cavity inclination and the Soret parameter but rather by the increase of the parameter R. The Soret parameter and the cavity inclination become perceptible at high values of R. The inclination γ = 60° leads to high mean temperatures compared to the other inclinations. The effect of R on mean concentration is amplified in the presence of Soret effect but limited in the absence of the latter. The negative Soret parameter combined with high internal heat generation and a relatively high inclination is important when the objective is to maintain the fluid at a high concentration of species. The presence of bicellular flow combined with the important elevation undergone by the fluid temperature, makes both the cold and hot walls playing a cooling role with the most important exchanges taking place at the upper part of these walls. The analysis of the mean mass transfer shows that the increase of the inclination may lead to an increase or a decrease of the mass transfer depending on the range of R, in the case of Sr = 0. However, for Sr = −0.5, it is observed that the increase of γ is generally accompanied by a reduction of the mass transfer.

To the best of the authors’ knowledge, the hybrid LBM-FD was not used before to study such a problem. Combined effect of R and inclination may be useful in charging the fluid with species when the objective is to maintain high concentrations in the medium.