Search results

The main purpose of this study resides essentially in the development of a new tool to quantify the biomass in the bioreactor operating under steady state conditions.

Modeling is the most relevant tool for understanding the functioning of some complex processes such as biological wastewater treatment. A steady state model equation of activated sludge model 1 (ASM1) was developed, especially for autotrophic biomass (XBA) and for oxygen uptake rate (OUR). Furthermore, a respirometric measurement, under steady state and endogenous conditions, was used as a new tool for quantifying the viable biomass concentration in the bioreactor.

The developed steady state equations simplified the sensitivity analysis and allowed the autotrophic biomass (XBA) quantification. Indeed, the XBA concentration was approximately 212 mg COD/L and 454 mgCOD/L for SRT, equal to 20 and 40 d, respectively. Under the steady state condition, monitoring of endogenous OUR permitted biomass quantification in the bioreactor. Comparing XBA obtained by the steady state equation and respirometric tool indicated a percentage deviation of about 3 to 13%. Modeling bioreactor using GPS-X showed an excellent agreement between simulation and experimental measurements concerning the XBA evolution.

These results confirmed the importance of respirometric measurements as a simple and available tool for quantifying biomass.

The era of crowd network is coming and the research of its steady-state is of great importance. This paper aims to establish a crowd network simulation platform and maintaining the relative stability of multi-source dissemination systems.

With this simulation platform, this paper studies the characteristics of “emergence,” monitors the state of the system and according to the fixed point judges the system of steady-state conditions, then uses three control conditions and control methods to control the system status to acquire general rules for maintain the stability of multi-source information dissemination systems.

This paper establishes a novel steady-state maintenance simulation framework. It will be useful for achieving controllability to the evolution of information dissemination and simulating the effectiveness of control conditions for multi-source information dissemination systems.

This paper will help researchers to solve problems of public opinion control in multi-source information dissemination in crowd network.

The purpose of this paper is to analyze the credit channel effects on investment behavior for the US and the Euro area.

This paper uses the dynamic stochastic general equilibrium model and calibrates a version of the Carlstrom and Fuerst’s (1997) agency cost model of business cycles with time-varying uncertainty in the technology shocks that affect capital production. To highlight the differences between the US and European financial sectors, the paper focuses on two key components of the lending channel: the risk premium associated with bank loans and the bankruptcy rates.

This paper shows that the effects of minor differences in the credit market translate into large, persistent and asymmetric fluctuations in real and financial variables and depend on the type of shocks. The results imply that the Euro areas supply elasticities for capital are less elastic than that of the USA following a technology shock. Finally, the authors find that the adverse impact of uncertainty shocks is heterogeneous across countries and amplified by the steady-state bankruptcy rate and risk premium.

This paper quantifies the effects of uncertainty shocks when there is a credit channel due to asymmetric information between lenders and borrowers for the Euro area countries, and then compares the results to that of the USA. This paper shows that financial accelerator mechanism could potentially play a significant role in business cycles in the Euro area. This result directly lends one to conclude the following: the credit channel that affects the financial sector does indeed matter for macroeconomic behavior, and that policy makers should be attentive in smoothing out uncertainties if the economic policies are to lower the business and financial cycle volatilities.

What is the relation between the land system with Chinese characteristics and the country's high-speed economic growth in the past decades? There is a lack of rigorous academic research based on the general equilibrium theory of macroeconomics on this issue.

By building a multisector dynamic general equilibrium framework with land system, this paper explores how the land supply mode with Chinese characteristics affects China's economic growth as well as its transmission mechanism.

This paper confirms the importance of land system with Chinese characteristics in explaining the mystery of China's high-speed economic growth. Counterfactual analysis shows that if China adopts a land system similar to that of other developing countries, GDP will drop 36% from the current level under the baseline model.

As the industrial sector shrinks relatively and the output elasticity of infrastructure decreases, this inhibitory effect will become more apparent. China should improve its land supply mode, especially expand the supply of commercial and residential land and reduce the cost of land in the service sector. This can promote better economic development in the future and thus improve household welfare and the structure of aggregate demand, replace “land-based public finance” and thus inhibit the “high leverage” risks of local governments.

The purpose of this paper is to examine the hotel growth model including hotel brand, culture and life cycle phases of the Myrtle Beach, South Carolina, the fastest growing tourism destination in the United States.

Culture reflecting consuming behaviour of low-context innovators and high-context imitators is measured by the price elasticity of demand (PED). Hotel brand reflecting guests’ hotel class is measured by the income elasticity of demand. Autoregressive distributed lag has been conducted on the Smith Travel Research data in 33 years (1989–2022) to determine the relationship among hotel brand, culture and life cycles.

Skilled labour is the key to make hotels grow. Therefore, increase room rates when hotels possess skilled professionals and decrease room rates when hotels have no skilled professionals. During the rejuvenation in Myrtle Beach (1999–2003), hoteliers increased room rates for innovators due to skilled professionals to increase revenue. Otherwise, a decrease in room rates due to lack of skilled professionals would lead to increase revenue.

(1) Although Myrtle Beach is one of the fastest growing tourism destinations in the US, it has a relatively small geographic area relative to the country. (2) Data cover over one tourist life cycle, so the time span is relatively short. Hoteliers can forecast the number of guests in different culture by changing room rates.

To optimize revenue, hoteliers can select skilled labour in professional design hotel brands which could make an increase in demand for leisure transient guests no matter what room rates increase after COVID-19 pandemic.

The study has considered the applied ethical processes regarding revenue management that would maximize both revenue and customer satisfaction when it set up an increase in room rates to compensate for professional hotel room design or it decreases room rates for low-income imitators in exploration and development.

This research highlights that (1) skilled design in the luxury hotel brand is the key for the hotel growth and (2) there is a steady state of the growth model in the destination life cycle.

Total factor productivity (TFP), for a country and for a firm as well, is a crucial element for economic growth by inducing high output. Actually, workers' effort is among the important factors that positively influence the TFP.

In this paper, the authors assume that the wage bonus enhances the worker's effort. Wage bonus is an incentive mechanism and plays a role in the TFP as is shown in a recent paper by Le Van and Pham (2021). The firm will maximize its profits. The supplies of capital and workers are exogenous. At equilibrium, the authors obtain that wage bonus has positive effects on output, labor productivity and price of the output.

The wage bonus system can make the optimal sequence of outputs grow without bounds. And if the optimal sequence converges to a steady state, this one can be characterized by higher output per capita than that in the steady state without the bonus.

In particular, the result show if, thanks to the wage bonus externality effect, the production may become of increasing returns and if the incentive mechanism is very strong, any optimal path of physical capitals will converge to infinity.

The purpose of this paper is to identify the impact of traditionally unmonitored energy sources and sinks on assessment of the as-built thermal performance of occupied homes. The analysis aims to demonstrate the potential scale of uncertainties introduced in a heat balance estimation of the heat transfer coefficient (HTC) when using in-use monitored data.

Energy flows for two UK homes – one a 1930s dwelling with high heat loss, the second a higher-performing 2014-built home – are predicted using the UK Government’s standard assessment procedure (SAP) and visualised using Sankey diagrams. Selected modelled energy flows are used as inputs in a quasi-steady state heat balance to calculate in-use HTCs as if from measured data sets gathered in occupied homes. The estimated in-use HTCs are compared against SAP-calculated values to illustrate the impact of including or omitting various heat sources and sinks.

The results demonstrate that for dwellings with low heat loss, the increased proportion of heating demand met by unmetered internal and solar gains informs a greater sensitivity of a heat balance estimation of the HTC to their omission. While simple quasi-steady state heat balance methods may be appropriate for dwellings with very high heat loss, alternative approaches are likely to be required for those with lower heat loss.

A need to understand the impacts of unmetered heat flows on the accuracy with which a building’s thermal performance may be inferred from in-use monitored data is identified: this paper illustrates the scale of these impacts for two homes at opposite ends of the energy performance scale.

This paper aims to investigate the wear behaviour of different materials for cylinder liners and piston rings in a linear reciprocating tribometer with special focus on the wear of the cylinder liner in the boundary lubrication regime.

Conventional nitrided steel, as well as diamond-like carbon and chromium nitride-coated piston rings, were tested against cast iron, AlSi and Fe-coated AlSi cylinder liners. The experiments were carried out with samples produced from original engine parts to have the original surface topography available. Radioactive tracer isotopes were used to measure cylinder liner wear continuously, enabling separation of running-in and steady-state wear.

A ranking of the material pairings with respect to wear behaviour of the cylinder liner was found. Post-test inspection of the cylinder samples by scanning electron microscopy (SEM) revealed differences in the wear mechanisms for the different material combinations. The results show that the running-in and steady-state wear of the liners can be reduced by choosing the appropriate material for the piston ring.

The use of original engine parts in a closely controlled tribometer environment under realistic loading conditions, in conjunction with continuous and highly sensitive wear measurement methods and a detailed SEM analysis of the wear mechanisms, forms an intermediate step between engine testing and laboratory environment testing.

The authors explore the hypothesis that some movements in commodity prices are anticipated (news shocks) and can trigger aggregate fluctuations in small open emerging economies. This paper aims to discuss the aforementioned objective.

The authors build a multi-sector dynamic stochastic general equilibrium model with endogenous commodity production. There are five exogenous processes: a country-specific interest rate shock that responds to commodity price fluctuations, a productivity (TFP) shock for each sector and a commodity price shock. Both TFP and commodity price shocks are composed of unanticipated and anticipated components.

The authors show that news shocks to commodity prices lead to higher output, investment and consumption, and a countercyclical movement in the trade-balance-to-output ratio. The authors also show that commodity price news shocks explain about 24% of output aggregate fluctuations in the small open economy.

Given the importance of both anticipated and unanticipated commodity price shocks, policymakers should pay attention to developments in commodity markets when designing policies to attenuate the business cycles. Future research should investigate the design of optimal fiscal and monetary policies in SOE subject to news shocks in commodity prices.

This paper contributes to the knowledge of the sources of fluctuations in emerging economies highlighting the importance of a new source: news shocks in commodity prices.

This study aims to analyse the non-linear losses of a porous media (stack) composed by parallel plates and inserted in a resonator tube in oscillatory flows by proposing numerical correlations between pressure gradient and velocity.

The numerical correlations origin from computational fluid dynamics simulations, conducted at the microscopic scale, in which three fluid channels representing the porous media are taken into account. More specifically, for a specific frequency and stack porosity, the oscillating pressure input is varied, and the velocity and the pressure-drop are post-processed in the frequency domain (Fast Fourier Transform analysis).

It emerges that the viscous component of pressure drop follows a quadratic trend with respect to velocity inside the stack, while the inertial component is linear also at high-velocity regimes. Furthermore, the non-linear coefficient b of the correlation ax + bx² (related to the Forchheimer coefficient) is discovered to be dependent on frequency. The largest value of the b is found at low frequencies as the fluid particle displacement is comparable to the stack length. Furthermore, the lower the porosity the higher the Forchheimer term because the velocity gradients at the stack geometrical discontinuities are more pronounced.

The main novelty of this work is that, for the first time, non-linear losses of a parallel plate stack are investigated from a macroscopic point of view and summarised into a non-linear correlation, similar to the steady-state and well-known Darcy–Forchheimer law. The main difference is that it considers the frequency dependence of both Darcy and Forchheimer terms. The results can be used to enhance the analysis and design of thermoacoustic devices, which use the kind of stacks studied in the present work.