Search results

This study aims to investigate if engineered compression variations using moisture-responsive knitted fabric design can improve breast support in seamless knitted sports bras.

An experimental approach was used to integrate a novel moisture-responsive fabric panel into a seamless knitted bra, and the resulting compression variability in dry versus wet conditions were compared with those of a control bra. Air permeability and elongation testing of between breasts fabric panels was conducted in dry and wet conditions, followed by three-dimensional body scanning of eight human participants wearing the two bras in similar conditions. Questionnaires were used to evaluate perceived comfort and breast support of both bras in both conditions.

Air permeability test results showed that the novel panel had the highest variance between dry and wet conditions, confirming its moisture-responsive design, and increased its elongation coefficient in both wale and course directions in wet condition. There were significant main effects of bra type and body location on breast compression measurements. Breast circumferences in the novel bra were significantly larger than in the control bra condition. The significant two-way interaction between bra type and moisture condition showed that the control bra lost compressive power in wet condition, whereas the novel bra became more compressive when wet. Changes in compression were confirmed by participants’ perception of tighter straps and drier breast comfort.

These findings add to the limited scientific knowledge of moisture adaptive bra design using engineered knitted fabrics via advanced manufacturing technologies, with possible applications beyond sports bras, such as bras for breast surgery recovering patients.

The purpose of this research was to determine the level of nonylphenols (NPs) present in wastewater from the first launder of new activewear garments purchased in Aotearoa, New Zealand.

Fifteen garments were purchased and prepared, and each was laundered separately. Wastewater was collected from each of the garments being laundered and tested for NPs, along with the controls.

According to the obtained results, detectable levels of NPs were present in all the garments tested.

The results obtained from the detection of NPs present in activewear garments is the first study of its kind in New Zealand and adds to the understanding of the distance that toxic chemicals can travel when used in textile manufacturing.

The aim of this study is to present an overview of sustainable practices in the development of waterproof breathable fabrics for garments. It aims to provide insights into the current state of academic research in this domain and identify and analyze major sustainable trends in the field.

This study conducts a thorough examination of research publications sourced from the Scopus database spanning the years 2013–2023 by employing a systematic approach. The research utilizes both descriptive analysis and content analysis to identify trends, notable journals and leading countries in sustainable waterproof breathable fabric development.

The study reveals a notable increase in studies focusing on sustainable approaches in the development of waterproof breathable fabrics for garments. Descriptive analysis highlights the most prominent journal and leading country in terms of research volume. Content analysis identifies four key trends: minimizing chemical usage, developing easily degradable materials, creating fabrics promoting health and well-being and initiatives to reduce energy consumption.

The main limitation of this research lies in its exclusive reliance on the Scopus database.

The insights derived from this study offer practical guidance for prospective researchers interested in investigating sustainable approaches to developing waterproof breathable fabric for garments. The identified trends provide a foundation for aligning research endeavors with contemporary global perspectives, facilitating the integration of sustainable methodologies into the garment industry.

This systematic literature review contributes original insights by synthesizing current research trends and outlining evolving sustainable practices in the development of waterproof breathable fabrics. The identification of key focus areas adds a novel perspective to existing knowledge.

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

This study aims to model tourist activities in a network and explore the properties of the network. Such network enables the author to explain and quantify how tourist activities are connected in determining tourist consumption as well as the organization of destination supply.

The author developed a network formation mechanism to create edges between nodes based on the joint probability of a pair of activities undertaken by tourists at a destination. By adjusting network sparsity, the author created an ensemble of four topologically similar networks for empirical testing. The author used tourist activity data of Hong Kong inbound tourists to test the network model.

The author found a robust hub–periphery topological structure of the tourist activity network. In addition, the network is featured by high clustering, short diameter and positive correlations between four node centralities, namely, degree, closeness, betweenness and eigenvector centralities. The author also generated the k-cores of the networks to further unravel the structure of hub nodes. The author found that the k-cores are dominated by tourist activities related to shopping or sightseeing, suggesting the high complementarity of these activities.

This study provides a different lens through which tourist consumption can be understood from a macroscopic angle by examining network topology and from a microscopic angle by examining node centralities.

To the best of the author’s knowledge, this is the first study attempting to model tourist activity and consumption in a network and explore the properties of the network. Not only has this study provided a new real-world network for network research, but it has also suggested an innovative modeling approach for tourist behavior research.

The purpose of this paper is to understand compression garment in the area of medical industry, compression garments were used initially for patients with circulatory problems. External pressure was created by compression garments on the body surface which prevents blood clots, leg swelling and improves venous hemodynamics.

Compression rehabilitation is a significant element in the effective management of lower limb problems of people associated with venous, lymphatic, fat disorders like lipoedema.

Compression garments have been attributed primarily for the increase in blood flow, improvement in recovery, reduction in muscle vibration that increase stability, improvement in thermoregulation, decrease in muscle pain, elimination of blood lactate and creatine kinase after exercise.

Compression garments are extraordinary clothes that contain elastomeric yarns or fibers that are responsible for applying significant mechanical pressure on the required body surface for compressing, stabilizing and supporting underlying tissues.

This study aims to develop a sports bra with cosmetic microcapsules that supports the breasts and provides an aesthetically upright and lifted posture by using 28 days period.

A fitting process was carried out on provided seamless sports bras to determine the criteria that have to be improved considering the desired properties. The new sports bras were produced after the pattern design was developed; cosmetic microcapsules were applied to some of the bras and some were used as a control group to compare the real cosmetic effects. Female subjects tried the newly developed sports bras in a 28-day wear trial. Measurements were taken at certain periods during the wear trials, and the obtained data were analyzed statistically.

The findings of this study determined that the product provides a decrease in breast girth and increases skin moisture and nipple height after 28 days of regular use due to the effect of cosmetic ingredients released from microcapsules. A great majority of subjects found the breast lifting and supporting property of the sports bra successful and were satisfied with the new shape of the subjects' breasts.

Fitting studies were carried out directly on the female body, and the designed and developed encapsulating type sports bra has been transformed into a cosmetic textile product that gains also cosmetic properties. The cosmetic effects of the bra were investigated with wear trials. On the other hand, the nipple height measure term was defined for the first time and added to the literature within the scope of the study.

Sports fashion is marketed showing happiness, physical performance and self-care. Thus, sports fashion brands should see a good fit with sustainability: future orientation, self-care, care for others and going out for a physical experience, oftentimes in nature. On the other hand, sports fashion is regularly made of non-sustainable materials and produced under difficult work conditions. This paper aims to discuss the aforementioned issues.

The paper at hand seeks to investigate sports brands' approach to sustainability by examining their product portfolio and their annual report data, analyzing their status quo and sustainability strategy. A content analysis is conducted employing the brands' annual reports and their online shops as data sources to assess their status quo in terms of sustainability as well as future plans.

Results show that on the ecological side, brands unanimously focus on carbon reduction, organic cotton, recycled polyester, circularity-ready business model innovation and water and toxic waste management. The social aspect may be divided into the focal brand and the supply chain, including similar measures: equality and diversity, the promotion of ethnic and cultural minorities and increased safety and health for workers.

The paper derives development opportunities and pitfalls for sports fashion brands.

The present study provides a comprehensive review of the advancements in five active heating modes for cold-proof clothing as of 2021. It aims to evaluate the current state of research for each heating mode and identify their limitations. Further, the study provides insights into the optimization of intelligent temperature control algorithms and design considerations for intelligent cold-proof clothing.

This article presents a classification of active heating systems based on five different heating principles: electric heating system, solar heating system, phase-change material (PCM) heating system, chemical heating system and fluid/air heating system. The systems are analyzed and evaluated in terms of heating principle, research advancement, scientific challenges and application potential in the field of cold-proof clothing.

The rational utilization of active heating modes enhances the thermal efficiency of cold-proof clothing, resulting in enhanced cold-resistance and reduced volume and weight. Despite progress in the development of the five prevalent heating modes, particularly with regard to the improvement and advancement of heating materials, the current integration of heating systems with cold-proof clothing is limited to the torso and limbs, lacking consideration of the thermal physiological requirements of the human body. Additionally, the heating modes of each system tend to be uniform and lack differentiation to meet the varying cold protection needs of various body parts.

The effective application of multiple heating modes helps the human body to maintain a constant body temperature and thermal equilibrium in a cold environment. The research of heating mode is the basis for realizing the temperature control of cold-proof clothing and provides an effective guarantee for the future development of the intelligent algorithms for temperature control of non-uniform heating of body segments.

The integration of multiple heating modes ensures the maintenance of a constant body temperature and thermal balance for the wearer in cold environments. The research of heating modes forms the foundation for the temperature regulation of cold-proof clothing and lays the groundwork for the development of intelligent algorithms for non-uniform heating control of different body segments.

The present article systematically reviews five active heating modes suitable for use in cold-proof clothing and offers guidance for the selection of heating systems in future smart cold-proof clothing. Furthermore, the findings of this research provide a basis for future research on non-uniform heating modes that are aligned with the thermal physiological needs of the human body, thus contributing to the development of cold-proof clothing that is better suited to meet the thermal needs of the human body.

Synthetic materials have many drawbacks in high-performance garments because they absorb less moisture and cause allergies to sensitive individuals. Cotton materials cannot satisfy all the requirements and cannot provide the required high performance. This study aims to use eco-friendly materials with a common structure to analyse their suitability for high-performance garment application.

This study used two eco-friendly yarns (bamboo, modal and bamboo: modal 50:50) and yarns per needle (two- and four-ply yarns). with a single jersey knit construction and gauge of 7. The physical, mechanical, appearance, comfort, thermal and ultraviolet protection factor (UPF) protection characteristics were evaluated using 15 tests.

The produced knitted fabrics showed high performance for use as garments with physical, mechanical, appearance, comfort, thermal and UPF protection characteristics that were achieved, tested and analysed. The highest-achieved samples with a good UPF (<15) were made from bamboo material, which has other high-performance characteristics such as antibacterial characteristics, a soft surface, thermal insulation and others.

The single jersey structure was used for producing fabrics as it is the common structure in the garment. Also, only gauge 7 was used for its economics and ease of production.