Search results

This study aims to investigate if engineered compression variations using moisture-responsive knitted fabric design can improve breast support in seamless knitted sports bras.

An experimental approach was used to integrate a novel moisture-responsive fabric panel into a seamless knitted bra, and the resulting compression variability in dry versus wet conditions were compared with those of a control bra. Air permeability and elongation testing of between breasts fabric panels was conducted in dry and wet conditions, followed by three-dimensional body scanning of eight human participants wearing the two bras in similar conditions. Questionnaires were used to evaluate perceived comfort and breast support of both bras in both conditions.

Air permeability test results showed that the novel panel had the highest variance between dry and wet conditions, confirming its moisture-responsive design, and increased its elongation coefficient in both wale and course directions in wet condition. There were significant main effects of bra type and body location on breast compression measurements. Breast circumferences in the novel bra were significantly larger than in the control bra condition. The significant two-way interaction between bra type and moisture condition showed that the control bra lost compressive power in wet condition, whereas the novel bra became more compressive when wet. Changes in compression were confirmed by participants’ perception of tighter straps and drier breast comfort.

These findings add to the limited scientific knowledge of moisture adaptive bra design using engineered knitted fabrics via advanced manufacturing technologies, with possible applications beyond sports bras, such as bras for breast surgery recovering patients.

The purpose of this research was to investigate the effect of knit fabric stitch patterns, as indicated by fabric thickness variations, on moisture responsiveness for different seamless knitted wool-based fabrics.

Forty fabrics were created on a Santoni Top-2 circular knitting machine by using combinations of jersey, tuck and float stitches in combinations of wool/Nylon, wool, and spandex yarns. Physical properties of the knit fabrics as well as changes in fabric thickness during dry, wet, after 30 min air-drying and after 60 min air-drying conditions were compared. Repeated measures ANOVA tests and bivariate correlation analysis were conducted.

The results indicated that changes in moisture conditions had a significant effect on fabric thickness, and these changes differed by stitch pattern groups. Float patterns and tuck/rib patterns showed a continued relaxation of fabric thickness through all conditions, but tuck stitches and rib stitches showed a thickness recovery. Wool swatches, unlike the wool/Nylon swatches, increased their average thickness in after 60 min air-drying condition compared to 30 min air-drying condition.

This research documents the moisture responsive properties for wool based yarns, as emerging natural functional materials for seamless knitting industry, with applications in garments for activewear as well as healthcare.

The purpose of this paper is to investigate the performance of post-disaster housing reconstruction projects, propose the conceptual living-transforming disaster relief shelter (LTFDR-shelter) approach where temporary shelter is incrementally transformed into a more permanent dwelling by using living technologies and investigate its applicability to provide sustainable post-disaster housing following natural-hazard-induced disasters.

A questionnaire survey with 120 household recipients of three Sri Lankan post-disaster housing projects was employed to explore how the post-disaster housing projects have performed against the occupants' expectations. Furthermore, the new proposed LTFDR-shelter conceptual approach's applicability to address the existing issues found in the study was investigated.

The paper evaluates and identifies the physical and technical, and socio-economic performance issues of post-disaster housing and discusses the applicability of the proposed LTFDR-shelter conceptual approach as an efficient tool to adequately improve the identified factors integrating three phases of relief, rehabilitation and reconstruction employing living technology.

Although the study's scope was limited to the occupant view of the performance of post-disaster housing in Sri Lanka, the findings and conceptual LTFDR-shelter approach could be of particular relevance to other developing countries affected by similar disasters. Further research is recommended to investigate and develop this concept in depth.

This study lays the conceptual foundation for a new theoretical approach in post-disaster housing, which encourages more interdisciplinary collaborations and empirical investigations that potentially enhance post-disaster housing performance and facilitates the application of living technology in the built environment.

The purpose of this paper is to provide a review of recent systematic and comprehensive advancement in electrospun polymer fiber and their composites with shape memory property.

The nanofiber manufacture technique is initially reviewed. Then, the influence of electrospinning parameters and actuation method has been discussed. Finally, the study concludes with a brief review of recent development in potential applications.

Shape memory polymer (SMP) nanofibers are a type of smart materials which can change shape under external stimuli (e.g. temperature, electricity, magnetism, solvent). In general, such SMP nanofibers could be easily fabricated by mature electrospinning technique. The nanofiber morphology is mainly affected by the electrospinning parameters, including applied voltage, tip-to-collector distance, viscosity of solution, humidity and molecular weight. For actuation method, most SMP nanofibers and their composites can change their shapes in response to heat, magnetic field or solvent, while few can be driven by electricity. Compared with the block SMPs, electrospun SMP nanofibers’ mat with porosity and low mechanical property have a wide potential application field including tissue engineering, drug delivery, filtration, catalysis.

This paper provides a detailed review of shape memory nanofibers: fabrication, actuation and potential application, in the near future.

The purpose of this paper is to study the interfacial effect on mechanical properties of the cellulose nano crystal (CNC)–shape memory polymer (SMP) composites by using combination of the theoretical and experimental approaches.

SMP composites were fabricated by introducing CNCs into crystalline shape memory polyurethane. The morphological, thermal and mechanical properties were comprehensively investigated. Theoretical approach based upon the percolation model was used to simulate the storage modulus E’ variation of the composites in crystalline and amorphous states, respectively. The classic two-phase percolation model was used for the amorphous-state composites. Furthermore, a three-phase model consisting of interfacial regions was created for the crystalline-state composites.

The deviation of nano fillers mechanical reinforcements was disclosed as the composites triggered thermal transitions. Modified percolation theory involving the interfacial effects greatly enhanced the simulation accuracy.

The study made the traditional percolating theory suitable for dynamic modulus and polymorphs polymers in terms of mechanics, which may extend the potential application.

The findings may greatly benefit the development of novel interfacial reinforcing theory and intelligent polymeric nanocomposites featuring polymorphs and dynamic properties.

A review on additive manufacturing (AM) of shape memory polymer composites (SMPCs) is put forward to highlight the progress made up to date, conduct a critical review and show the limitations and possible improvements in the different research areas within the different AM techniques. The purpose of this study is to identify academic and industrial opportunities.

This paper introduces the reader to three-dimensional (3 D) and four-dimensional printing of shape memory polymers (SMPs). Specifically, this review centres on manufacturing technologies based on material extrusion, photopolymerization, powder-based and lamination manufacturing processes. AM of SMPC was classified according to the nature of the filler material: particle dispersed, i.e. carbon, metallic and ceramic and long fibre reinforced materials, i.e. carbon fibres. This paper makes a distinction for multi-material printing with SMPs, as multi-functionality and exciting applications can be proposed through this method. Manufacturing strategies and technologies for SMPC are addressed in this review and opportunities in the research are highlighted.

This paper denotes the existing limitations in the current AM technologies and proposes several directions that will contribute to better use and improvements in the production of additive manufactured SMPC. With advances in AM technologies, gradient changes in material properties can open diverse applications of SMPC. Because of multi-material printing, co-manufacturing sensors to 3D printed smart structures can bring this technology a step closer to obtain full control of the shape memory effect and its characteristics. This paper discusses the novel developments in device and functional part design using SMPC, which should be aided with simple first stage design models followed by complex simulations for iterative and optimized design. A change in paradigm for designing complex structures is still to be made from engineers to exploit the full potential of additive manufactured SMPC structures.

Advances in AM have opened the gateway to the potential design and fabrication of functional parts with SMPs and their composites. There have been many publications and reviews conducted in this area; yet, many mainly focus on SMPs and reserve a small section to SMPC. This paper presents a comprehensive review directed solely on the AM of SMPC while highlighting the research opportunities.

The paper aims to promote the development of intelligent materials and the 4D printing technology by introducing recent advances and applications of additive layered manufacturing (ALM) technology of intelligent materials and the development of the 4D printing technology. Also, an arm-type ALM technology of shape memory polymer (SMP) with thermosetting polyurethane is briefly introduced.

This paper begins with an overview of the development and applications of intelligent materials around the world and the 4D printing technology. Then, the authors provide a brief outline of their research on arm-type ALM technology of SMP with thermosetting polyurethane.

The paper provides the recent developments and applications of intelligent materials and 4D printing technology. Then, it is suggested that intelligent materials mixed with different functional materials will be developed, and these types of materials will be more suitable for 4D printing.

This paper overviews the current developments and applications of intelligent materials and its use in 4D printing technology, and briefly states the authors’ research on arm-type ALM technology of SMP with thermosetting polyurethane.

This paper aims to present a review on utilizing shape memory technology (SMT) for active assembly/disassembly, i.e. assembly/disassembly without physically touching.

The fundamentals behind the shape memory effect (SME) in materials, in particular shape memory alloys (SMAs) and polymers, which are the cornerstones of SMT, are introduced, together with the possible approaches to implement this effect in active assembly/disassembly. Example applications for not only active assembly/ disassembly, but also programmed active disassembly are presented.

The advantages of utilizing SMT over conventional assembly/disassembly techniques are identified.

The paper introduces the fundamentals behind the SME and the basic approaches to implement the SMT in not only active assembly/disassembly, but also programmed active assembly.

The purpose of this paper is to examine the underlying mechanism and physico‐chemical requirements of chemo‐responsive shape change/memory polymers and to explore the future trend of development and potential applications.

Working mechanism in chemo‐responsive shape change/memory polymers is firstly identified. And then the physico‐chemical requirements for the representative polymers are characterized.

The different working mechanisms, fundamentals, physico‐chemical requirements and theoretical origins have been discussed. Current research and development on the fabrication strategies of chemo‐responsive shape change/memory polymers have been summarised. The future trend and potential applications have been explored and estimated.

This review examines physico‐chemical requirements and theoretical origins necessary to achieve chemo‐responsiveness, and then discusses recent developments and future trends.

Shape change/memory polymers can be used in the broad field of bio‐ and/or medicine.

Breakthroughs and rapid development of chemo‐responsive shape change/memory polymers will significantly improve the research and development of smart materials, structures and systems.