Search results

Numerous types of shunt active power filters have been proposed in many papers. The classification of these filters depends on various points of view. However, every type of a shunt active filter, which compensates non‐active component of load current, irrespective of the method used to detect this component and control strategies of the filter, should keep supply source current equal to active current of a load‐and‐filter circuit. This goal can be achieved in many ways, using various structures of active filters. But different realizations of filters cause differences in their properties. This paper, which is meant to serve as a review and synthesis of earlier work, shows some possibilities of forming of single‐phase shunt active filter behaviour. The following active filter properties are discussed: operation with an immediate reaction in the supplying source branch to a load current change, and with the reaction only once in each supplying source cycle; regulation by the filter of the non‐active current component of fundamental frequency; active filtering and simultaneous feeding of DC load with stabilizing DC voltage; operation with stabilization of supplying source current amplitude; reducing filter switching frequency; and reducing current distortions in the supplying source branch. All the waveforms presented were produced using a computer simulation method.

This paper aims to propose a new configuration of a shunt active power filter (SAPF) connected with a photovoltaic (PV) system through a Z-source inverter (ZSI) topology. This topology ensures a single-stage operation and overcomes the limitations of the conventional two-stage operation topologies based on the DC–DC boost converter. The proposed system is designed for the purpose of reducing the total harmonic distortion of the source current by eliminating the current harmonics and exploiting the solar irradiation.

First, all the main parts of the proposed shunt active power filter are fully described in this paper, and then a PV system based on a Z-source inverter with a maximum power point tracking controller is used to exploit the solar irradiance and solve the problem of discharging of the direct current (DC) capacitor during the filtering process.

From the extensive simulation tests carried out using MATLAB/Simulink, the obtained results prove that the proposed shunt active power filter performs well despite several operation scenarios, including different load types and under abrupt irradiance.

A new shunt active power filter configuration has been proposed. This configuration benefits from the solar irradiation and overcomes the drawbacks of the conventional configurations by using the Z-source inverter instead of the voltage source inverter and DC–DC boost converter.

Shunt active power filters are used to decrease or almost eliminate non‐active currents flowing through the supply source. Numerous control methods of active filters have been proposed in many papers. The aim of this paper is to demonstrate a simple but very effective method of obtaining the compensated load active current.

The method allows one to control the shunt active power filter only by monitoring energy stored in the filter. Based on the introduced generic structure of the filter the changes of filter energy are examined in order to obtain the reference current for the filter compensation action.

This presented method can be implemented to nearly all structures of active filters. It is suitable not only for the single‐phase but also for the three‐phase circuit. Such energy‐controlled filters may be built on the basis of voltage‐ and current‐source inverters as well.

This paper provides an alternative approach to address the problem of the shunt active filter control method. The paper shows that monitoring the filter's energy suffices for proper control of the filter compensation action.

Votage source converter (VSC) based or current source converter (CSC) based shunt active power filter (SAPF)? It is the main question in harmonic elimination project using SAPF.This paper presents some criteria based on which the designer can decide which type of filter is more suitable for implementation of the project according to the nature and characteristics of the project.

Owing to the importance of cost and power losses criteria, relevant equations will be formulated and comparative analysis will be carried out between conventional structures based on CSC or VSC. For validation of analyses, simulation results have been studied in the MATLAB–SIMULINK environment.

Simulation results have examined two important criteria of power losses and costs. Although the results show the superiority of VSSAPF to CSSAPF in both criteria, this comparison is performed in a general and conventional condition. Using third-order filters of inductive-capacitive-inductive (LCL) type in VSSAPF, using insulated-gate bipolar transistor (IGBT) with reverse-voltage blocking ability in CSSAPF, which eliminates the need to use series diodes, and the use of superconducting technology in the DC-side endpoint in CSSAPF, not only reduce the difference of cost and losses in two schemes but also may lead to the lower costs and losses in CSSAPF than VSSAPF.

This paper is the result of many years working on active power filter and can be useful for engineers who are engaged in industrial projects.

The purpose of this study is to find a control method for three-phase four-wire shunt active power filters, which uses a load-equivalent conductance for obtaining a reference signal for compensating non-active current.

Changes of energy stored in an active filter’s reactance elements are monitored to find the active component of the load current. It is then used as a current reference to be realised as a supply source current. Computer simulation methods were used to verify the presented control method.

To calculate the reference signal for the active filter action, it is enough to measure the active filter’s DC-side capacitors’ voltages. It has been proved that P regulators are sufficient to realise compensating current and to stabilise active filter capacitors’ voltages. The supply source-neutral conductor current can be zeroed even for nonlinear and unbalanced load-generating DC-component in its neutral conductor. In addition, the active filter can buffer load-active power changes and act simultaneously as a local energy accumulator.

This paper provides an alternative approach to address the problem of the three-phase four-wire shunt active power filter control methods.

The paper aims to explain the investigation of the space vector modulation (SVPWM), in shunt active powers filters (APFs) field, for controlling the generated current.

With the inclusion of the SVPWM control technique, the proposed topology of the two‐level shunt active power filter (APF), based on IGBTs, besides its efficiency in harmonics cancellation and power factor correction, contributes in switching power losses reduction.

The paper provides an extended theoretical study and a detailed explanation of the application of the SVPWM on shunt APFs, and demonstrates how power losses can be reduced by limiting the switching process to the two thirds of the pulse duty cycle.

Simulation and experimental validations will still be requested as to the accuracy of the model and the applicability to the polluted electrical power systems plants.

The paper formulates an easy mathematical method to investigate the SVPWM algorithm with clarification of its various steps. It offers a benefit to people engaged in theoretical and practical research in APFs, inverters, and PWM modulation strategies.

Since, there are few studies which clarify the application of the SVPWM on APFs, the paper may help to understand the mathematical implementation of this control strategy both for controlling the APF current and for gating signals generation.

This paper aims to present the prototype of a 140 kVA shunt active power filter (APF) for current harmonics and fundamental reactive power compensation of a 200 kW induction heating system.

Design issues of the power components, of the switching ripple filter and of the digital control are addressed and discussed. The APF control algorithm has been implemented on the 16‐bit, fixed‐point, TMS320LF2407 A DSP controller. The current control is based on proportional‐sinusoidal signal integrators with good performance in current harmonic elimination and power factor compensation.

The experimental tests, performed in real industrial environment for a 200 kW induction heating plant, show that the performance goals are fulfilled.

The sinusoidal signal integrators (for consistency with the other plural forms of acronyms) of the current controller are implemented in the rotating reference frame aligned with the voltage vector at the point of common connection. This allows the compensation of two harmonics with a single SSI, thus halving the computational effort of the DSP.

In industrial induction heating, the need for harmonic and reactive power compensation lasts a few seconds per minute, making passive solutions not suitable. The presented APF is a valid solution for this application, where only a few tailored implementations are available on the market.

The purpose of this study is to provide the enhancement of power quality of a high power-rated voltage source inverter driven induction motor with a three-phase, three-level neutral point clamped converter placed at the front end, while a passive power filter is connected in shunt with it. The improvement in power quality can be achieved by reducing the total harmonic distortion in source current. The controllers were designed for the linearization of the high-power induction motor drive. A control method is presented for the regulation of the common DC-link voltage.

The induction motor is modeled using its dynamic equations, and a decoupling controller is designed to linearize the nonlinear dynamics of the drive through feedback. The common DC-link voltage of the proposed front-end connected converter is monitored and controlled through a control method which feeds the pulse width modulated inverter that drives the induction motor. A passive power filter is designed to meet the reactive power requirement of the system in addition to improve the power quality.

Simulations were carried out for the proposed topology of the drive mechanism, and the outcomes were analyzed by a comparative analysis of the drive system both in the presence of the passive filter as well as in the absence of the filter. The total harmonic distortion is found to be reduced enough to meet the standards with the designed filter, and the reactive power is also compensated considerably. The input power factor at the supply side is maintained almost to unity, and the DC-link voltage of the proposed circuit topology is maintained at the desired level. The overall performance of the drive system was found to be useful and economical.

A new topology of a front-end connected three-level neutral point clamped converter to a high power-rated induction motor drive is proposed. The drive is fed by a pulse width modulated inverter with a common DC-link with the front end connected converter. A passive filter is designed with respect to the reactive power requirement of the system and connected in shunt to the converter at the supply side. Control schemes are designed and used for the drive system and also for the regulation of the common DC-link voltage of the proposed front end connected converter.

The purpose of this study is to help the researchers, public, industries and government to realize the tremendous trends to improve the power quality of both sources and load side.

The work carried out in the Facts device and power quality issues.

Maintaining the quality of electric power is always a challenging task. The effect of power electronics devices leads to improper power quality. The use of FACTS devices is preferably the best approach to treat power-quality-related problems. Usually, all FACTS devices are constructed to operate on the side of either the source side or the load.

This paper explores a broad comprehensive study of various types of power quality problems and classification of FACTS devices with its recent developments. Furthermore unified power quality conditioner (UPQC) is particularly reviewed to highlight the advantages over other compensating devices. An exhaustive study of literature has been carried out and most significant concepts are presented

The purpose of this paper is to implement a finite set model predictive control algorithm to a shunt (or parallel), multilevel (cascaded H-bridge) active power filter (APF). Specifically, the purpose is to get a controller that could compensate the mains current and, at the same time, to control the voltages of its capacitors. This strategy avoids the use of multiple PWM carriers or another type of special modulator, and requires a relatively low processing power.

This paper is focussed in the application of the predictive controller to a single-phase parallel APF composed for two H-bridges connected in series. The same methodology can be applied to a three-phase APF. In the DC buses of each H-bridge, a floating capacitor was connected, whose voltage is regulated by the predictive controller. The controller is composed by, first, a model for the charge/discharge dynamics for each floating capacitor and a model for the output current of the APF; second, a cost function; and third, an optimization algorithm that is able to control all these variables at the same time, choosing in each sample period the best combination of firing pulses.

The controller can track the voltage references, compensate the current harmonics and compensate reactive power with an algorithm that evaluates only the three nearest voltage levels to the last voltage level applied in the inverter. This strategy decreases the number of calculations required by the predictive algorithm. This controller can be applied to the general case of a single-phase multilevel APF of N-levels and extend it to the three-phase case without major problems.

The implemented controller, when the authors consider a constant sample time, gives a mains current with a Total Harmonic Distortion (THD-I) slightly greater in comparison with the base algorithm (that evaluates all the voltage levels). However, when the authors consider the processing times under the same processor, the implemented algorithm requires less time to get the optimal values, can get lower sampling times and then a best performance in terms of THD-I. To implement the controller in a three-phase APF, a faster Digital Signal Processor would be required.

The implemented solution uses a model for the charge/discharge of the capacitors and for the filter current that enable to operate the cascaded multilevel inverter with asymmetrical voltages while compensates the mains currents, with a predictive algorithm that requires a relatively low amount of calculations.